Instruction/ maintenance manual of the product MT104-108 Altinex
Go to page of 12
MULTI-TASKER™ MANUAL PART NUMBER: 400-0177-002 6-IN, 1-OUT S-VIDEO SWITCHER CARD FOR MULTI-TASKER™ ENCLOSURES USER’S GUIDE MT104-108.
MULTI-TASKER™ 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS .............. 2 1.1 GENERAL ................................ ................. 2 1.2 INSTALLATION ................................ ......... 2 1.3 CLEANING .......................
MULTI-TASKER™ 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MT104-108 . Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT104-108 and to prevent fire and shock hazard.
MULTI-TASKER™ 3 ABOUT YOUR MULTI-TASKER™ 2 MT104-108 6-in 1-out S-Video Switcher Card The MT104 -108 is a 6-in (+1 internal input) 1 -out S -Video Switcher Card designed for use in Multi -Tasker enclosures. The MT S -Video SW card enables 6 S-Video sources to be connected and switched to a single display or recording device.
MULTI-TASKER™ 4 PRODUCT DESCRIPTION 4 APPLICATION DIAGRAM 5.
MULTI-TASKER™ 5 Diagram 2: Block Diagram 6-IN 1-OUT S-VIDEO SWITCHER POWER 1 2 3 4 5 6 IN OUT (4-PIN MINI DIN CONNECTORS IN/OUT) MT104-108 INPUT SELECT OUTPUT ON/OFF CONTROL 7 EXPANSION.
MULTI-TASKER™ 6 INSTALLING YOUR MULTI-TASKER™ 6 Step 1. Slide the MT104-108 into an available slot in the Multi-Tasker™ Enclosure in order to connect to the bus. Make sure that the MT104-108 card fits into place. Secure the card to the Multi-Tasker™ by tightening the retainer screws located on the top and bottom of the MT104-108 card.
MULTI-TASKER™ 7 Example: One MT104-108 card is in slot #2 of unit 3: Send the command [VERC2U3] and the Multi - Tasker™ Enclosure will return: MT104-108 690-0160-002 MT104-108 = card type 690-0160-002 = software version 2. [C] This command receives the status of the card.
MULTI-TASKER™ 8 Example: There are two MT104-108 cards in slots 6 and 7 of unit 3. Enable input 1 of card 6 and input 3 of card 7 simultaneously. Use the following commands: [ON1C6U3 P ] [ON3C7U3 P ] [SW] If "F" is included, use the [ONmCnUi PF ] command or the [ONmCnUi FP ] command.
MULTI-TASKER™ 9 6. […S] – Save This command will save the configuration command being sent in memory. When sending the command [ON1C4S], after reset or power up, output 1 on C4 will be enabled.
MULTI-TASKER™ 10 [G1] : will return feedback as ON12 G1U0. [G2] : will return feedback as ON2 G2U0 . 14. [RD] This command displays the members in each group.
MULTI-TASKER™ 11 TROUBLESHOOTING GUIDE 8 We have carefully tested and have found no problems in the supplied MT104-108 ; however, we would like to offer suggestions for the following: 8.1 LED IS NOT LIT Cause 1: Card cage is not plugged in. Solution: Plug card cage in.
An important point after buying a device Altinex MT104-108 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altinex MT104-108 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altinex MT104-108 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altinex MT104-108 you will learn all the available features of the product, as well as information on its operation. The information that you get Altinex MT104-108 will certainly help you make a decision on the purchase.
If you already are a holder of Altinex MT104-108, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altinex MT104-108.
However, one of the most important roles played by the user manual is to help in solving problems with Altinex MT104-108. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altinex MT104-108 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
