Instruction/ maintenance manual of the product FAR2XX7 Furuno
Go to page of 6
C on f i g u r ing t he F A R2 XX 7 Se r i e s Ra d a r for u s e w i t h M a x S e a Ti m e Z e ro Introduction In order to operate with MaxSea Time Zero AND NavNet3D , the FAR2XX7’s processor software must be version 02.5x. If you plan to connect one or multiple FAR2XX7(s) directly to MaxSea Time Zero without NavNet3D, you can use version 02.
Setup the Compu ter ’s IP addres s: You will have to assign a manual IP address to the computer (usually 172.31.3.150). This IP must be unique and not already taken by a nother computer on the network . To set up an IP address, open the Windows “Control Panel .
Select “Internet Protocol (TCP/IP)” and click on “Properties . ” Note: Under Vista/7 select “ Internet Protocol Version 4 ” as shown below Fill the IP fields as shown below: Click on OK to confirm the change. The new IP can take up to 20 seconds to be recognized.
Turn OFF any Firewall that could preve nt data to be exchanged between th e Radar and the PC. If you wish to leave the Firewa ll ON, make sure that MaxSea is authorize or in the firewall exception. Note: If you plan to connect another computer, make sure that the IP address of the second computer is different (for example 172.
ARPA Inform ation: C o n f i g u r e t h e F A R 2 x x 7 Th e ARPA target output must be setup through the LAN for all the FAR2xx7. Hold “H L OFF” and pres the “MENU” key 5 times. The “Initialize” menu appears. First, select “ARP Preset” (6).
Click on “ Next ” then “ Finish ” to finalize the configuration.
An important point after buying a device Furuno FAR2XX7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Furuno FAR2XX7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Furuno FAR2XX7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Furuno FAR2XX7 you will learn all the available features of the product, as well as information on its operation. The information that you get Furuno FAR2XX7 will certainly help you make a decision on the purchase.
If you already are a holder of Furuno FAR2XX7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Furuno FAR2XX7.
However, one of the most important roles played by the user manual is to help in solving problems with Furuno FAR2XX7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Furuno FAR2XX7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
