Instruction/ maintenance manual of the product PM-PRO Furman
Go to page of 12
FURMAN FURMAN FURMAN FURMAN PRO SERIES Power Conditioner/Monitor MODELS PM-PRO, PM-PRO-E Owner's Manual 3-9844 © 1998 FURMAN SOUND, INC. 960112-1407.
2 PM-PRO POWER CONDITIONER/MONITOR PM-PRO, PM-PRO-E SPECIFICATIONS Note: Where different, PM-PRO-E specs are in parentheses. Current rating: Input Voltage Range: Meter Accuracy: Spike Protection Modes.
PM-PRO POWER CONDITIONER/MONITOR 3 Safety Information To obtain best results from your Furman PM-PRO, please be sure to read this manual carefully before using it. WARNING: To reduce the risk of electrical shock, do not expose this equip- ment to rain or moisture.
4 PM-PRO POWER CONDITIONER/MONITOR cables at plugs, and the point where they exit from the PM-PRO. To prevent risk of fire or injury, damaged cords and cables should be replaced immediately. 7. Clean the PM-PRO with a damp cloth only. Do not use solvents or abrasive cleaners.
PM-PRO POWER CONDITIONER/MONITOR 5 Introduction Thank you for your purchase of a Furman PM-PRO or PM-PRO-E Power Con- ditioner / Monitor, and congratulations on your choice. (For simplicity, in this manual the designation "PM-PRO" refers to either the PM-PRO or the PM-PRO-E unless a specific distinction is made.
6 PM-PRO POWER CONDITIONER/MONITOR PROTECTION EXTREME OK VOLTAGE GROUND OK FLASHES WHEN SHUT DOWN LINE VOLTAGE AC VOLTS FLASHING DISPLAY INDICATES OUT OF RANGE 90 20 AMP POWER CONDITIONER/ MONITOR MODEL PM-PRO PROTECTION OK: This LED is normally on when the power to the PM-PRO's outlets is switched on.
PM-PRO POWER CONDITIONER/MONITOR 7 CURRENT AC AMPS UNSWITCHED OUTLET 20 AMPS POWER 2 8 14 20 - PROTECTIVE SHUTDOWN MAY OCCUR page 8). The voltmeter provides three special flashing patterns to indicate ab- normal power conditions: (1) If only the single leftmost LED flashes, the input voltage is marginally low.
8 PM-PRO POWER CONDITIONER/MONITOR will not be tripped falsely by the transient high inrush currents often encoun- tered when turning on large reactive loads like power amps.
PM-PRO POWER CONDITIONER/MONITOR 9 Symptom: Possible Cause: Action Needed: Symptom: Possible Cause: Action Needed: Symptom: Possible Cause: Action Needed: Symptom: Possible Cause: Action Needed: PROTECTION OK Indicator not lit. Protection devices are damaged.
10 PM-PRO POWER CONDITIONER/MONITOR Limited Warranty Important Note: To be sure of obtaining full protection under the terms of the Three Year Limited Warranty in case your ownership documents are lost, please fill out and return the Warranty Registration Card immediately.
PM-PRO POWER CONDITIONER/MONITOR 11.
12 PM-PRO POWER CONDITIONER/MONITOR Other Furman Products Power Conditioning & Distribution PL-8, PL-PLUS PL-PRO PL-TUNER PLH-15 PM-8 PS-8, PS-8R PS-PRO PowerLink PowerPort MiniPort-15 MiniPort-20.
An important point after buying a device Furman PM-PRO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Furman PM-PRO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Furman PM-PRO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Furman PM-PRO you will learn all the available features of the product, as well as information on its operation. The information that you get Furman PM-PRO will certainly help you make a decision on the purchase.
If you already are a holder of Furman PM-PRO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Furman PM-PRO.
However, one of the most important roles played by the user manual is to help in solving problems with Furman PM-PRO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Furman PM-PRO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
