Instruction/ maintenance manual of the product PL-PRO D II Furman
Go to page of 12
SERIES II 20 AMP POWER CONDITIONERS.
SERIES II 20 AMP POWER CONDITIONERS PL-PRO Series II Additional Features • T wo retractable, long-life, low-heat LED light xtures with dimmer control for rack illumination • Front panel meter t.
SERIES II 20 AMP POWER CONDITIONERS I N T R O D U C T I O N Thank you for purchasing a Furman Series II Power Conditioner , and Congratulations on your choice. The Series II power conditioners feature Furman’s revolutionary Series Multi- Stage Protection Plus (SMP+) circuit, as well as our exclusive Linear Filtering T echnology (LiFT).
SERIES II 20 AMP POWER CONDITIONERS carefully before using. WA R N I N G T o reduce the risk of electrical shock, do not expose this equipment to rain or moisture. Dangerous high voltages are present inside the enclosure. Do not remove the covers. Refer servicing to qualied personnel only .
SERIES II 20 AMP POWER CONDITIONERS 9. Do not attempt to service your Series II unit beyond what is described in this manual. All other servicing should be referred to qualied service personnel.
SERIES II 20 AMP POWER CONDITIONERS O P E R A T I O N Retractable Rack Lights, Rear Panel Lamp and Dimmer Control: The PL-PRO II and PL-PRO D II utilize a dimmer control for the two retractable front panel light tubes. The dimmer knob controls the brightness of both light xtures.
SERIES II 20 AMP POWER CONDITIONERS (1) If only the single leftmost (beneath the 90V mark – 180V for E version ) LED ashes, the input voltage is marginally low . (2) If all of the LED’s on the voltmeter ash, the input voltage is marginally high.
SERIES II 20 AMP POWER CONDITIONERS units, the Extreme V oltage indicator LED will light if the input voltage is above the extreme voltage cutoff, and power will not be applied to the unit’s outlets.
SERIES II 20 AMP POWER CONDITIONERS DEFINITIONS SPIKE: This is a pulse of energy on the power line. Spikes can have voltages as high as 6000 volts. Though they are usually of very short duration, the energy they contain can be considerable, enough to damage sensitive solid-state components in audio and computer equipment.
SERIES II 20 AMP POWER CONDITIONERS 9 registration. Shipping charges to the Furman factory or to an authorized repair location must be prepaid by the Purchaser of the product. Manufacturer shall, at its own expense, furnish a replacement Product or , at Manufacturer ’s option, repair the defective Product.
SERIES II 20 AMP POWER CONDITIONERS SPECIFICA TIONS Current rating: 20 amps (“E” versions 16 amps) Operating V oltage: 90 to 140 V AC (“E” versions 180 to 280 V AC) Over V oltage Shutdown: 140.
SERIES II 20 AMP POWER CONDITIONERS Furman Sound, LLC. 1997 South McDowell Blvd. Petaluma, California 94954-6919 USA Phone: 707-763-1010 Fax: 707-763-1310 Web: www .
An important point after buying a device Furman PL-PRO D II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Furman PL-PRO D II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Furman PL-PRO D II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Furman PL-PRO D II you will learn all the available features of the product, as well as information on its operation. The information that you get Furman PL-PRO D II will certainly help you make a decision on the purchase.
If you already are a holder of Furman PL-PRO D II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Furman PL-PRO D II.
However, one of the most important roles played by the user manual is to help in solving problems with Furman PL-PRO D II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Furman PL-PRO D II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
