Instruction/ maintenance manual of the product P20-2 Fujitsu Siemens Computers
Go to page of 11
Monitor Operating Manual English SCENICVIEW P17-2 / P19-2 / P20-2.
SCENICVIEW P17-2 / P19-2 / P20-2 2 i Operation of the monitor The monitor offers the following possibilities that enable it to be optimally adjusted for the respective user and the respective situation. Adjusting height, rake and rotation The monitor height can be adjusted within a range of approx.
SCENICVIEW P17-2 / P19-2 / P20-2 3 Adjusting portrait format The monitor can be turned from the "wide format" (landscape mode) into the "high format" position (portrait mode).
SCENICVIEW P17-2 / P19-2 / P20-2 4 Changing the monitor settings When putting the monitor into operation for the fi rst time, the screen display should be optimally adapted to the screen controller used and adjusted in accordance with your needs.
SCENICVIEW P17-2 / P19-2 / P20-2 5 Locking the OSD menu The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings. ► Press and hold the SELECT/MENU button for a few seconds while you sw itch on the monitor with the ON/OFF switch.
SCENICVIEW P17-2 / P19-2 / P20-2 6 The corresponding setting window (here: Image Adjust ) is display ed (on the right-hand side). The first function ( H-Position ) is highlighted. ► If necessary, press the 6 or 5 button to mark another function. ► Press the SELECT/MENU button to select the highlighted function.
SCENICVIEW P17-2 / P19-2 / P20-2 7 Adjusting size and position Calling the Image adjust setting window H-Position Adjusting the horizontal position With this function you move the picture to the left or to the right. V-Position Adjusting the vertical position With this function you move the picture up or down.
SCENICVIEW P17-2 / P19-2 / P20-2 8 Setting display of the OSD menu Calling the OSD Setup setting window Language Setting language for the OSD menu With this function you choose between E nglish (default setting), French, German, Italian and Spanish as the language for the OSD menu.
SCENICVIEW P17-2 / P19-2 / P20-2 9 Displaying information Calling the Information setting window With this function the model designation, serial number, resolution, H/V frequency, input signal and polarity of the sync hronisation signal are displayed.
SCENICVIEW P17-2 / P19-2 / P20-2 10 Troubleshooting Should an error occur, first check the following point s. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk.
SCENICVIEW P17-2 / P19-2 / P20-2 11 Having this problem? Check the following points: Picture is wrongly adjusted ► Press the SELECT/MENU button to activate the function Factory Recall . The Auto Processing message is displayed. Picture disturbances (vertical lines) ► Press the EXIT/AUTO button to perform the auto- adjustment of the screen.
An important point after buying a device Fujitsu Siemens Computers P20-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu Siemens Computers P20-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu Siemens Computers P20-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu Siemens Computers P20-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu Siemens Computers P20-2 will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu Siemens Computers P20-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu Siemens Computers P20-2.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu Siemens Computers P20-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu Siemens Computers P20-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
