Instruction/ maintenance manual of the product LOOX N Fujitsu Siemens Computers
Go to page of 56
Handheld EasyGuide English Pocket LOOX N/C Series.
Are there ... ... any technical problems or other questions which y ou would like to be clarified? Please contact: • our Hotline/Help Desk (see Help Desk List or the Internet: www.fujitsu-siemens.com/helpdesk ) • your sales partner • your sales outlet Further information can be found in the "Safety" and "Warranty" manuals.
.
This manual was produced by X erox Global Serv ices. Published by Fujitsu Siemens Computers GmbH Edition 1, September 2005 Order No.: A 26391-K165-Z120-1-7619.
Pocket LOOX N/C Series EasyGuide Your Pocket LOOX Important notes Operating the Pocket PC Configuring the Pocket PC Connecting and networking the Pocket PC with other devices Troubleshooting and tips .
Adobe and Acrobat are trademarks of Adobe syst ems Incorporated and may be protected in certain countries. Intel is a registered trademark, XScale is trademark of Intel Corporation, U.S.A. Microsoft, Windows and ActiveSync are register ed trademarks of the Microsoft Corporation.
Contents Your Pocket LOOX ... ......................................................................................................................... 1 Notational conventions ..........................................................................
Contents Configuring th e Pocket P C .............................. ......... ...................................................................... . . 3 5 Optimising energy management .................................................................
Your Pocket LOOX ... ... is equipped with the Office applications Microsoft Word , Excel and Outlook . In Outlook you cannot only receive and send mails, but also manage y our appointments and be reminded of your tasks. You can access names, e-mail addresses and tel ephone numbers while y ou are away from y our home or office.
Notational conv entions Notational conventions The meanings of the symbols and fonts used in this manual are as follows: ! pay particular attention to texts marked with this symbol. Failure to observe this warning may endanger y our life, destroy the system, or lead to loss of data.
Softw are overv iew Software overview The following table provides an overview of the most important programs which are already installed on your Pocket PC and where y ou can find information on using these programs.
Softw are overv iew FSC Password Protection against theft – permanent passwords for protecting against misuse. Patented solution Help file on the Pocket-PC and user manual "Pocket LOOX Software Suite" on the Microsoft Getting Started CD.
Important notes This chapter contains safety notes and important information you must observe when using y our Pocket PC. This Pocket PC complies with the relevant safe ty regulations for data processing equipment.
Important notes Underway with the Pocket PC Observe the following information when you travel w ith your Pocket PC. Transporting Pocket PC • Switch the Pocket PC off.
Important notes Using the Pocket PC Store the Pocket PC in a fully charged state in a dry environment. If y ou store the Pocket PC for up to a month, the storage temperature should be between –20 °C and +60 °C. If you store the Pocket PC for up to three months, the storage temperature should be between –20 °C and +45 °C.
Important notes CE marking 0470 Products bearing the CE marking comply with the R&TTE Directive (1999/5/EC), EMC Directive (89/336/EEC), and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Operating the Pocket PC In this section you will find a description of the operating controls of your Pocket-PC and how you operate the Pocket-PC. ! Please take note of the information in the "Important notes" chapter.
Operating the Pocket PC N C 4 5 2 3 1 1 = Navigation button (N) or CONNECTMOBILITY-E2C button (C) 2 = Today button 3 = Navigation key 4 = Contacts button 5 = Calendar button Back side of Pocket PC 12 .
Operating the Pocket PC Indicators Indicator Colour Description Indicator state Battery fully charged on Battery is being charged flashing Status: battery charge level orange Battery charger not conne.
Operating the Pocket PC Inserting battery 1 5 3 2 4 ► Pull the cover (1) off the Pocket PC in the direction of the arrow. ► Lay the battery in the battery compartment (2 +3). When doing so, watch the contact connections and hold onto the tab (4). ► Slide the cover (5) in the direction of the arrow as far as it will go.
Operating the Pocket PC Connecting PSC11R-050 power adapter ! Please take note of the information in the "Important notes" chapter. UK You can connect the PSC11R-050 power adapter directly to the Pocket PC. ► Slide the suitable power adapter plug into the PSC11R-050 power adapter in the direction of the arrow until it engages.
Operating the Pocket PC 3 2 1 ► Connect the ActiveSync cable (1) to the ActiveSync port on the Pocket PC. ► Connect the power adapter cable (2) to t he DC socket of the ActiveSync cable. ► Connect the PSC11R-050 power adapter (3) to an electrical outlet.
Operating the Pocket PC Installing ActiveSync on y our PC/notebook The data synchronisation helps you alw ays keep your data on your Pocket PC and y our PC/notebook up to date when you work alternately with your PC/notebook and y our Pocket PC. The ActiveSync cable and the ActiveSync software are provided for data sy nchronisation.
Operating the Pocket PC Starting Pocket PC the first time 2 1 ► Press the Suspend/Resume button (1) to switch on the Pocket PC. ► Pull out the pen (2) in the direction of the arrow. Adjusting touchscreen The display of your Pocket PC is a touchscreen.
Operating the Pocket PC First data synchronisation between the Pocket PC and the PC/notebook After you have specified the desired and required se ttings for synchronisation in the ActiveSy nc Setup Wizard, the first synchr onisation starts automatically.
Operating the Pocket PC Switching on and off w ith soft reset (warm boot) After certain applications or the installation of new programs, it may be necessary to restart the Pocket PC with the soft reset. i Unsaved data is lost. Shut down all pr ograms before you restart the Pocket-PC.
Operating the Pocket PC Resetting the Pocket-PC (Cold start) If your Pocket-PC locks up and switching it on and off with the suspend/resume button and soft reset has no effect, you can reset your Pocket-PC. i Unsaved data is lost. Shut down all programs before you reset the Pocket-PC.
Operating the Pocket PC Resetting Pocket PC to delivered state 1 2 3 ► Simultaneously press and hold the Suspend/Resume button (1) and the Calendar application button (2). ► Briefly press the stylus tip into the soft reset opening (3). Continue to hold down the Suspend/Resume button and the Calendar application button for a few seconds.
Operating the Pocket PC Using standard operating elements Using the pen ► Briefly touch the desired element on the disp lay with the sty lus to trigger an action. ► To activate popup menus, also touch the desired element with the stylus, however allow the stylus to rest on the element for a moment.
Operating the Pocket PC Using application buttons N C 3 4 2 1 1 = Navigation button (N) or CONNECTMOBILITY-E2C button (C) 2 = Today button 3 = Contacts button 4 = Calendar button With the application .
Operating the Pocket PC Inserting and removing expansion card A slot enables the operation of an expansion ca rd of the type "Secure Digital I/O" or "MultiMediaCard". ! Observe the manufacturer's instructions when using the expansion cards.
Operating the Pocket PC Removing expansion card 1 2 3 ► Press on the edge of the expansion card (1) so that the expansion card jumps out of the slot slightly. ► Slide the expansion card out of the Pocket PC (2). ► Insert the placeholder (3) again into the slot if necessary.
Operating the Pocket PC Using Pocket PC as USB Host device With the optional USB Host cable you can use your Pocket PC as a USB Host device and connect various USB devices, such as a MEMORYBIRD, to the Pocket PC. The USB Host cable is available as an accessory under the name "Sync Cable USB client/host".
Operating the Pocket PC On the road with the Pocket PC Using GPS With a GPS receiver and navigation software you can use the Pocket PC as a navigation system. Depending on the equipment, the GPS receiver is eit her integrated or available as an external accessory.
Operating the Pocket PC Charging battery directly with PSC11R-050 pow er adapter You can connect the PSC11R-050 power adapter directly to the Pocket PC.
Operating the Pocket PC Connecting PSC11R-050 power adapter to Pocket PC w ith adapter 3 2 1 ► Connect the adapter (1) to the ActiveSync port of the Pocket PC. ► Connect the power adapter cable (2) to the adapter. ► Connect the PSC11R-050 power adapter (3) to an electrical outlet.
Operating the Pocket PC Charging battery with cradle There are two ways to connect the PSC11R-050 pow er adapter to the cradle (optional): • You can use the ActiveSync cable.
Operating the Pocket PC Connecting PSC11R-050 power adapter to cradle w ith adapter 1 3 2 4 ► Connect the adapter (1) to the ActiveSync port of the cradle. ► Connect the power adapter cable (2) to the adapter. ► Connect the PSC11R-050 power adapter (3) to an electrical outlet.
Operating the Pocket PC Synchronising data with ActiveSy nc To also have the current version of the data you have processed on the road on your Pocket PC available on your PC/notebook, you must copy t hese data to your PC/notebook.
Operating the Pocket PC Connecting Pocket PC to PC/notebook 2 4 1 3 ► Switch your PC or notebook on. ► Connect the ActiveSync cable (1) to the ActiveSync port on the Pocket PC. ► Connect the ActiveSync cable to a USB port (2) of your PC/notebook.
Operating the Pocket PC Using cradle With the cradle (optional) you can charge the battery in the Pocket PC and/or carry out a data synchronisation between the Pocket PC and a PC/notebook. The cradle has an audio output for c onnecting active l oudspeakers or headphones.
Operating the Pocket PC Using cradle for data synchronisation i Before the first data synchronisation between the Pocket PC and the PC/notebook, y ou must install the program ActiveSync on your PC/notebook (see section "Initial start-up"). 4 3 5 4 2 ► Switch your PC or notebook on.
Configuring the Pocket PC You can already choose from a large number of pr ograms when y ou use the Pocket PC for the first time. In addition, proven default settings are def ined for the menu structure, energy management, memory management and security functions.
Configuring the Pocket PC Using energy-saving possibilities You can save energy in several w ays to optimally utilise the battery operating time: ● Switch the Pocket PC into the Suspend mode when you are not using it. ● Reduce the processor speed.
Configuring the Pocket PC Adjusting menus Frequently used programs appear in the Start menu. You can adjust the Start menu to meet y our needs. ► Touch the Menus symbol under Start - Settings - Private . A list of programs/applications appears. To remove programs from the Start menu, click in the checkbox of the program.
Configuring the Pocket PC Configuring hardware buttons FSC KeyLock: Preventing switch-on with application buttons By default, your Pocket LOOX starts up if the Suspend button and an application button are pressed. In the program FSC KeyLock you can specify that the Pocket PC only starts if the Suspend button is pressed.
Connecting and networking the Pocket PC with other devices The Pocket PC offers a wide range of ways to exchange data with other devices or to w ork in a network. You have already become familiar with data sy nchronisation via ActiveSync and an ActiveSync cable in the "Synchronising data with ActiveSy nc" secti on.
Connecting and n etworking th e Pocket PC with other devices Wireless communication with Bluetooth With your Pocket PC with an integrated Bluetooth module (optional) you can communicate w irelessly with other Bluetooth devices, e.g. with another Pocket PC, a notebook or a mobile phone.
Troubleshooting and tips If a fault occurs in your Pocket PC, try to eliminat e it with the measures described in this chapter. If you fail to correct the problem, proceed as follows: ► Make a note of the steps and the circumstances t hat led to the fault.
Troubleshooting and tips The Pocket PC does not start after switch on If the Pocket PC does not start after switch on, this may be due to one of the following: The battery is dead. ► Charge the battery. ► Connect the PSC11R-050 power adapter to the cradle with the Pocket PC.
Troubleshooting and tips The Suspend/Resume button does not respond properly You have pressed and held the Suspend/Resume button too long to switch the Pocket PC on or off. ► Briefly press the Suspend/Resume button until the Pocket PC switches on or off.
Technical data Pocket PC Processor: Intel PXA270 with up to 624 MHz (depending on model) Main memory: 64 - 256 Mbyte ROM (depending on model) 64 Mbyte RAM Electrical data Regulations complied with: CE.
Technical data Charging time (when not in operation): Max. 4 hours Operating time: up to 12 hours up to 350 hours in stand-by mode PSC11R-050 powe r Primary: omatic) omatic) r adapte • Rated voltage: • Frequency: 100 V to 240 V (aut 50 Hz to 60 Hz (aut Secondary: ent: • Rated voltage: urr • Max.
Index A ActiveSync partnership, establishing 17 ActiveSync port 10 Adjusting touchscreen 18 Application button calendar button 11 CONNECTMOBILITY-E2C button 11 Contacts button 11 navigation button 11 .
Index Initial start-up 13 basic operation 18 first start 18 today screen 18 touchscreen 18 Installing ActiveSync 17 Installing, new software 45 M Microphone 10 N Navigation button 11 Navigation key 11.
Index Time not correct 45 Time not correct 45 Tips 45 Today button 11 Today screen 18 Transport 6 Travel, Pocket PC 6 Troubleshooting 45 U Using application buttons 25 Using cradle 36 Using standard o.
An important point after buying a device Fujitsu Siemens Computers LOOX N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu Siemens Computers LOOX N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu Siemens Computers LOOX N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu Siemens Computers LOOX N you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu Siemens Computers LOOX N will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu Siemens Computers LOOX N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu Siemens Computers LOOX N.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu Siemens Computers LOOX N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu Siemens Computers LOOX N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
