Instruction/ maintenance manual of the product 5BCR10P Altech Auto Security
Go to page of 8
128-8776 1 of 8 Y our Alarm and or Remote St art unit has a configurable receiver that allows the transmitter to be programmed to operate the Lock Unlock functions with one transmitter button or with two transmitter buttons (separate Lock/ Unlock). In addition, the receiver also allows driver priority function.
128-8776 2 of 8 2 THIS P AGE LEFT BLANK INTENTIONALL Y.
128-8776 3 of 8 programming with the default button configurations for the first four chan- nels will be complete. TO ENTER THE PROGRAM MODE: 1. Turn the ignition switch to the “ON” position. 2. Within 10 seconds, press and release the valet/program switch three times.
128-8776 4 of 8 1 1. Within 10 Seconds, press and hold any unused button(s) of the first transmitter you wish to control Channel 5 output, (Auxiliary Output 2) until a long chirp is heard from the siren. (Repeat this for each transmitter you wish to operate the Channel 5 output) 12.
128-8776 5 of 8 3 slots. If in step 3 you identified two transmitters, you will have to fill the additional two slots, etc... 4. Press and hold any unused button or combination of buttons until a long chirp is heard from the siren. Release and press the button or button combination again and again until all remaining slots are full.
128-8776 6 of 8 To replace the transmitter battery: 1. Slightly lift the battery cover where shown and slide in the direction noted on the cover. 2. Remove the discharged battery noting the orientation of the contacts. Properly dispose of the discharged battery.
128-8776 7 of 8 Attention: T ransmitter Ordering Department Important: T o help us expedite your order , please print all of the information legibly and mail this form and your payment according to the instructions below .
128-8776 8 of 8 8 128-8776 © 2010 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, NY 11788 This device complies with FCC Rules Part 15 Operation is subject to the following two conditions: (.
An important point after buying a device Altech Auto Security 5BCR10P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altech Auto Security 5BCR10P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altech Auto Security 5BCR10P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altech Auto Security 5BCR10P you will learn all the available features of the product, as well as information on its operation. The information that you get Altech Auto Security 5BCR10P will certainly help you make a decision on the purchase.
If you already are a holder of Altech Auto Security 5BCR10P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altech Auto Security 5BCR10P.
However, one of the most important roles played by the user manual is to help in solving problems with Altech Auto Security 5BCR10P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altech Auto Security 5BCR10P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
