Instruction/ maintenance manual of the product R450 Fujitsu
Go to page of 12
PRIMERGY R450 System configurator and order-information guide Contents Instructions Configuration diagram Configurator 0 System software I Basic unit II Processor III Memory IV Graphics V Accessible d.
System configurator and order-information guide PRIMERGY R450 Status 2003-10-24 Instructions This document contains basic product and configuration information that will enable you to configure your system via PC-/ System-Architect.
System configurator and order-informtion guide PRIMERGY R450 Status 2003-10-24 Configuration diagram PRIMERGY R450 TOP VIEW FRONT VIEW System unit ( I ) Extension slots Peripheral Bay ( V ) Graphics ( IV ) 3.
System configurator and order-informtion guide Start "PRIMERGY R450" PRIMERGY R450 Status 2003-10-24 SW Configurator with OEM-Software without OEM-Software for PRIMERGY Server for PRIMERGY S.
System configurator and order-information guide Start PRIMERGY R450 PRIMERGY R450 Status 2003-10-24 Section I Basic unit Rack basic unit 4U including The PRIMERGY R450 basic unit comes with: 1 x Xeon .
System configurator and order-information guide A PRIMERGY R450 Status 2003-10-24 There are 3 bays for hot-plug power supplies, each with 500W Each basic unit contains 3 modules and provides redundanc.
System configurator and order-information guide B PRIMERGY R450 Status 2003-10-24 Section V Accessible drives SNP:SY-F2313E1-P SNP:SY-F2312E1-P A CD-ROM or DVD-ROM drive is required for CD-ROM 0,5&quo.
System configurator and order-information guide C PRIMERGY R450 Status 2003-10-24 Section VII SCSI-/Fibre-channel controller A. on-board SCSI Controller for internal hard disks 2-channel U160-SCSI controller on-board; included as standard The following cabling is standard, if no Disk Array Controller is used 1.
System configurator and order-information guide D PRIMERGY R450 Status 2003-10-24 Section VIII Disk Array D. 0-channel Ultra RAID Controller The following cabling is standard, if any Disk Array Controller is used 1. Channel A of the RAID Controller is connected to the 1st backplane for 3 HDs 2.
System configurator and order-information guide E PRIMERGY R450 Status 2003-10-24 Section IX Communication / Network on-board LAN Controller Fast Ethernet Contr. on-board The Intel LAN controllers 10/100TX, 1000SX, 1000TX Intel Ethernet Express Pro100+ can be used with the on-board controller in Teaming Mode.
System configurator and order-information guide F PRIMERGY R450 Status 2003-10-24 Section X System Management Products (RemoteView) S26361-F1790-E219 without graphical RemoteView Software V3.
System configurator and order-information guide PRIMERGY R450 Status 2003-10-24 Change report Date Order number Change 2003-08-13 S26361-F2764-E573 Hard disk 73GB 15.000rpm Ultra 320 SCSI - now available 2003-08-13 S26361-F2764-E536 Hard disk 36GB 15.
An important point after buying a device Fujitsu R450 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu R450 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu R450 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu R450 you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu R450 will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu R450, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu R450.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu R450. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu R450 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
