Instruction/ maintenance manual of the product M8000 Fujitsu
Go to page of 110
Site Planning Guide SPARC ® Enterprise M8000 / M9000 Servers English.
.
SP ARC ® Enter pr ise M8000/M9000 Ser v ers Site Planning Guide Order No . U41685-J-Z816-3-76 P ar t No. 81 9-7885-12 April 2008, Re vision A.
Please Recycle Copyright 2007 -2008 FUJITSU LIMITE D, 1-1, Kamikodan aka 4-chome, Nakahara- ku, Kawasaki-shi, Kan agawa-ken 21 1 -8588, Japan. All ri ghts reserved. Sun Microsystems, Inc. provided te chnical inpu t and review on portions of this material.
Copyright 2007 -2008 FUJITSU LIMITED, 1-1, Kamikodan aka 4-chome, Nakahara -ku, Kawasaki -shi, Kanaga wa-ken 21 1-8588, Japon. T ous droits réservés. Entrée et r e vue tecnical fournies par Sun Micr osystems, Incl sur des parties de ce matériel. Sun Microsystems, Inc.
.
v Contents Preface xiii 1. Physical Specification 1–1 1.1 Before Setting Up the System 1–1 1.2 Physical Specifications 1–4 1.2.1 System Components 1–4 1.2.1.1 Names and Corr espondin g Capaciti es and Functions 1–4 1.2.1.2 External Dime nsions and W eights 1–5 1.
vi SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 2. Network Connection Specificatio ns 2–1 2.1 Planning Y our Network Connection 2–1 2.1.1 Setup and Ne twork Conne ctions 2–2 2.1.2 Platform and Doma in Setup Information 2–3 2.
Contents vii 3.4.1.3 Three-Phase Power Supply 3–17 3.4.1.4 Three-Phase Star Power Supply 3–19 3.4.2 Circuit Br eaker Capacity and Characteristics 3–21 3.4.2.1 Circuit Br eaker Capaci ty of Customer Panel Boar d 3– 21 3.4.2.2 Blockade Characte r of Cir cuit Breaker 3–22 3.
viii SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008.
ix Figur es FIGURE 1-1 SPARC Enterprise M8000 Server 1–7 FIGURE 1-2 SPARC Enterprise M8000 Server + Power Cabin et 1–8 FIGURE 1-3 SPARC Enterprise M9000 Server (Base Cabine t) 1–9 FIGURE 1-4 SPA.
x SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 FIGURE 1-18 SPARC Enterprise M8000 Server + Power Cabin et Footprint 1–24 FIGURE 1-19 SPARC Enterprise M9000 Server (Base Ca.
xi Ta b l e s TA B L E 1-1 Checklist 1–1 TA B L E 1-2 Names and Quantities 1–4 TA B L E 1-3 Installation Specifications (E xternal Dimensions and Weights) 1–5 TA B L E 1-4 Space Required for Tra.
xii SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008.
xiii Pr eface The SP ARC ® Enterprise M8000/M9000 Servers Site Planning Guide pr ovides the p h y s i c a l s ys t e m s p e c i f i c a ti o n s fo r t hi s t y p e o f s e r v e r , g i v e s a n o v e r v i ew o f t h e network specifications, and explains other items that need to be cons idered beforeha nd when planning system installation.
xiv SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 Structur e and Contents of This Manual This manual is org a nized as described below: ■ Chapter 1 Physical Specificati on This chapter pr ovides the physical system specifications for SP ARC Enterprise M8000/M9000 servers.
Preface xv Note – “x” in the order number is the version num ber of the manual. 1. Manuals on the W eb The latest versions of all the SP ARC Enterp rise Series manuals are available at th e following website: http://manuals.fujitsu-siemens.com/ 2.
xvi SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 3. Solaris Operating Sys tem Related Manuals http://docs.sun.com T ext Conventions This manual uses the following font s and symbols to expr ess specific types of information.
Pref ace xvii Pr ompt Notations The following prompt notation s ar e used in this manual. Syntax of the Command Line Interface (CLI) The command syntax is as follows: ■ A variable that requir es input of a value must be enclosed in <>. ■ An optional element must be enclosed in [ ].
xviii SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 Envir onment Requirements for Using This Pr oduct This pro duct is a computer that is intended to be used in a computer room.
Pref ace xix Conventions for Alert Messages This manual uses the foll owing conventions to show alert messages, which are intended to prevent injury to the user or bystanders as well as property damage, and important messages that ar e useful to the user .
xx SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 Notes on Safety Important Alert Messages This manual pr ovides the following important alert signals: Caution – The W A RNING signal indicates a dangero us situation could r esult in death or serious injury if the user doe s not perform the procedure corr ectly .
Pref ace xxi Caution – The CAUTION sig nal indicates a hazar dous situation could result in minor or moderate personal injury if the user d oes not perform the procedur e correctly . This signal also indicates that damage to th e product or other property may occur if the user does not per form the procedur e correctly .
xxii SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 Normal operation Data destruction Confirm the items listed below befor e turning off the p ower . Otherwise, data may be destroyed. • All applications have completed pr ocessing.
Preface xxi ii Alert Labels The labels shown below are affixed on this pr oduct. These labels pr ovide information for users of the product: Caution – Do not peel of f the labels.
xxiv SPARC Enterprise M8000/M9000 Servers Site Planning Guide • A p ril 2008 SP ARC Enterprise M9000 Server (Front View).
Pref ace xxv SP ARC Enterprise M9 000 Server (Rear View).
xxvi SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 Pr oduct Handling Maintenance Caution – Certain tasks in this manual should only be performed by a certified service engine er . User must not pe rform th ese tasks. Incorrect operation of these tasks may cause electric shock, injury , or fire.
Preface xxvii ■ Plugging or unplugging of external interface cards ■ Maintenance and inspecti ons (repairing, and regular diagnos i s and maintenance) Caution – The followi ng tasks r e gar ding this product and the optional pr oducts provid ed from Fuji tsu Siemens Computers sh ould only be perfor med by a certified service engineer .
xxviii SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 Fujitsu Siemens Computers W elcomes Y our Comments W e would appreci a te your comments and suggestions to improve this document. Y ou can submit your comments by using “Reader's Comment Form” on page xx ix .
Pref ace xxix Reader's Comment Form.
xxx SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 FOLD AND T APE FOLD AND T APE BUSINESS REPLY MAIL FIRST -CLASS MAIL PERMIT NO 741 SUNNYV ALE CA NO POST AGE NECESSAR Y IF MA.
1-1 CHAPTER 1 Physical Specification This chapter describes what the reader is expected to know , including physical specification for the SP ARC ® Enterprise M8000 /M9000 servers, before pla nning server installation. This chapter contains the following sec tions: ■ Section 1.
1-2 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 Physical specifications Has the server installation location been decided? ❏ Does the installation floor layout sa tisfy the ventilati on and maintenance access requirements? See Section 1.
Chapter 1 Physical Specif ication 1-3 Facility power Do you know the r equir e d operating voltages and electrical current levels of t he devi ce and peripheral s? See Section 3.
1-4 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 1.2 Physical Specifications This section outlines the SP ARC Enterprise M8000/M9000 servers components an d lists their physical specification s. 1.2.1 System Components 1.2.1.
Chapter 1 Physical Specif ication 1-5 1.2.1.2 External Dimensions and W eights T ABLE 1-3 lists the external dimensions an d weights of the SP ARC Enterprise M8000/M9000 servers cabi net.
1-6 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 M9000 (base cabinet + expansion cabinet) + Power Cabinet 2282 (89.8) 1260 (49.6) 1800 (70.9) 2580 2 Rack-mountable Dual Power Feed 489 (19.3) 1003 (39.5) 278 (10.9) [6U] 75 3 Power Cabinet 317 (12.
Chapter 1 Physical Specif ication 1-7 1.2.1.3 System Appearance FIGURE 1- 1 to FIGURE 1-6 sh ow the appearance of th e server components and the associated servers in their maximum configurati on.
1-8 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 FIGURE 1-2 SP ARC Enterprise M800 0 Server + Power Cabinet F ront Rear.
Chapter 1 Physical Specif ication 1-9 SP ARC Enterprise M9000 Server Appearance FIGURE 1-3 SP ARC Enterpri se M9000 Server (Base Ca binet) Fr o n t R e a r.
1-10 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 FIGURE 1-4 SP ARC Enterpris e M9000 Server (B ase Cabinet + Expansion Cabinet) F ront Rear.
Chapter 1 Ph ysical Specification 1-11 FIGURE 1-5 SP ARC Enterp rise M9000 Server (Base Cabinet + Power Cabinet) F ront Rear.
1-12 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 FIGURE 1-6 SP ARC Enterprise M9 000 Server (Base Cabin et + Expansion Ca binet + Power Cabinet) F ront Rear.
Chapter 1 Ph ysical Specification 1-13 1.2.2 System Installation (Space) 1.2.2.1 Size and Space Specifications Before starting to assemble a SP ARC En terprise M8000/M9000 server installa tion, secure a service area (maintenanc e area) that is large enough for each device (cabinet) plus requir ed service ac cess space for each component.
1-14 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 FIGURE 1-8 SP ARC Enterprise M8000 Server + Power Cabine t Installation Area Note – Before mountin g units in a SP ARC Enterprise M8000 server equi pment rack, secure the service ar eas shown.
Chapter 1 Ph ysical Specification 1-15 FIGURE 1-9 SP AR C Enterprise M8000 Server (W it h an Equipment Rack) Installation Area 2860 (1 12.6) 1260 (49.6) 800 (31.
1-16 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 FIGURE 1-10 SP ARC Enterprise M8000 Server (W ith an Equipment Rack) + Power Cabinet Installation Area Note – Before moun.
Chapter 1 Ph ysical Specification 1-17 FIGURE 1-11 SP ARC Enterp rise M8000 Server (W ith an Equipment Rack) Installation Area M8000 Service area Service area 750 (29.
1-18 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 FIGURE 1-12 SP ARC Enterprise M8000 Server (W ith an Equipment Rack) + Power Cabinet Installation Area Power Cabinet M8000 Service area Service area Unit: mm (inch) 1054 (41.
Chapter 1 Ph ysical Specification 1-19 SP ARC Enterprise M9000 Serv er Installation Ar ea FIGURE 1-13 SP ARC Enterprise M9000 Server (Base Ca binet) Installation Area M9000 (Base Cabinet) Service area Service area Unit: mm (inch) 900 (35.4) 900 (35.4) 1260 (49.
1-20 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 FIGURE 1-14 SP ARC Enterprise M9000 Server (Base Cabi net) + Power Cabinet Installation Area Service area Service area M9000 (Base Cabinet) Power Cabinet 1 154 (45.3) 837 (33.
Chapter 1 Ph ysical Specification 1-21 FIGURE 1-15 SP ARC Enterprise M9000 Server (Base Cabin e t + Expansion Cabinet) Installation Area Service area Service area Unit: mm (inch) M9000 (Ex. Cabinet) M9000 (Base Cabinet) 837 (33.0) 1674 (65.9) 900 (35.
1-22 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 FIGURE 1-16 SP ARC Enterprise M9000 Server (Base Cabi net + Ex pansion Cabinet) + Power Cabinet Installation Area Service area Service area Unit: mm (inch) 317 (12.5) 824 (32.
Chapter 1 Ph ysical Specification 1-23 1.2.2.2 Footprints of the Components FIGURE 1- 17 to FIGURE 1-22 show the bottom of the SP ARC Enterprise M8000/M9000 servers components, such as the openings for laying cables, air inlet ports used for cooling, legs, and casters .
1-24 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 FIGURE 1-18 SP ARC Enterprise M8000 Serv er + Pow er Cabinet Footprint Unit: mm (inch) Caster F eet Opening f or air inlet .
Chapter 1 Ph ysical Specification 1-25 SP ARC Enterprise M9000 Server Footprint FIGURE 1-19 SP ARC Enterp rise M9000 Serv er (Base Cabinet ) Footprint Unit: mm (inch) Fr o n t Caster F eet Opening f o.
1-26 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 FIGURE 1-20 SP ARC Enterprise M9000 Server (B ase Cabinet) + Power Cabinet Footprint Unit: mm (inch) Fr o n t Caster F eet .
Chapter 1 Ph ysical Specification 1-27 FIGURE 1-21 SP ARC Enterprise M9000 Server (Base Cabi net + Expansion Cabinet) Footprint Unit: mm (inch) F ront Caster Fe et Opening f or air inlet Opening f or .
1-28 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 FIGURE 1-22 SP ARC Enterprise M9000 Server (Base Cabi net + Ex pansion Cabinet) + Power Cabinet Footprint Unit: mm (inch) F.
Chapter 1 Ph ysical Specification 1-29 1.2.2.3 Free-Access Floor Openings for Underfloor Air -Conditioning Use underfloor air conditioni ng to cool the S P ARC Enterprise M9000 server (with an extended cabinet). T o use underfloor air conditioning, air-cond itioning opening s must be provided on the free-access floor under the cabinet.
1-30 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 FIGURE 1-24 SP ARC Enterprise M9000 Server (Base Cabi net + Ex pansion Cabinet) + Power Cabinet Footprint 1.2.2.4 Ceiling Height The minimum ceiling heig ht for the SP ARC Enterprise M8000/M9 000 server is 2.
Chapter 1 Ph ysical Specification 1-31 1.2.3 Planning Y our Access Route This section describes nece ssary consider ations before you move th e server to its installation destination. 1.2.3.1 Space Required for System T ransport The access route must satis fy the r equirem ents listed in T ABLE 1-4 .
1-32 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 1.2.3.2 Other Considerations Confirm that the access r oute is free of any step s and other obstacles that would expose the device to shock.
Chapter 1 Ph ysical Specification 1-33 Method of Securing the De vice to the Floor Surface (Example of securing the SP ARC Enterprise M9000 server in place) FIGURE 1-25 Cabinet Stabilization Measur e : Securi ng the Device to the Floor Surface 850 (33.
1-34 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 Method of Securing the Device Thr ough a Hole in the Floor FIGURE 1-26 Cabinet Stabilization Measure: Securing the Device T.
2-1 CHAPTER 2 Network Connection Specifications This chapter describes the network co nnection specifications of the SP ARC Enterprise M8000/M9000 servers. ■ Section 2.1, “Planning Y our Network Connection” on page 2-1 ■ Section 2.2, “UPS Interface” on p age 2-7 2.
2-2 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 FIGURE 2-1 SP ARC Enterprise M8000/M90 00 Server Connection Schematic Diagram of Interface Cables 2.
Chapter 2 Ne twork Connection Specifications 2-3 2.1.2 Platform and Domain Setup Information The following informat ion is r equired for installati on of the SP ARC Enterprise M8000/M9000 servers: ■.
2-4 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 XSCF Configuration A (Basic Configuration) Only one of the two LAN ports is used. Th e serial port and the other LAN port are reserved so tha t they can be used as main tenance ports.
Chapter 2 Ne twork Connection Specifications 2-5 XSCF Configuration B (Restricted Configura t ion) (Restricted redundancy) - Both LAN ports are used. One port is used for system administration, and the other is used for th e remote message function. If one switch fails, errors can be r eported.
2-6 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 XSCF Configuration C (Maximum Configura t ion) (Maximum redundancy) - Both LAN ports are used. Each swit ch has mainte nance ports, which ar e used for the r emote service or system administration.
Chapter 2 Ne twork Connection Specifications 2-7 2.2 UPS Interface This section describes the Un interruptible Power Supply (UPS) interface which connects to and controls the UPS.
2-8 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 2.2.3 Signal Line Configuration This section describes signal definitions and electrical specifica t ions. 2.2.3.1 Definitions of Signals FIGURE 2-5 shows the signal line configuration when connected to a UPS.
Chapter 2 Ne twork Connection Specifications 2-9 ON: Indicates contacts are closed OFF: Indicates contacts are open Note1: Use a UPS capable of normal battery power supply operation fo r at least 10 to 60 seconds after this signal is turned on.
2-10 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 2.2.3.2 Electrical Specifications T ABLE 2-2 and T ABLE 2-3 list the electrical specific ations for the UPS interface. Input circuit Remarks: Signal-line chatter must be 1ms or less.
Chapter 2 Networ k Connection Specification s 2-11 2.2.4 Cable Connector The interface cable has the following sp ecifications. ■ Connector type D-SUB9 pin Male (install side: Fe male) DEU-9PF-F0 (f.
2-12 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008.
3-1 CHAPTER 3 Envir onmental and Electrical Specifications This chapter explains environmen tal and electrical power supply specifications and conditions necessary for stable system operation : ■ Enviro nmental Requirements ■ Electrical S pecifications ■ Cooling Spec ifications ■ Facility Power Requirements 3.
3-2 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 3.1.2 Recommended Ambient T emperatur e and Humidity Keep the temperature in the computer room at a comfortable level for people or slightly lower .
Chapter 3 Environme ntal and Ele ctrical Specificati ons 3-3 according to the monitoring data at indi vidual points corr esponding to multiple exhaust vents in the main unit and other units in the r oom.
3-4 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 3.1.3 V ibration Requirements The allowable vibrations in the SP ARC Enterprise M80 00/M9000 servers ar e listed in T ABLE 3-3 .
Chapter 3 Environme ntal and Ele ctrical Specificati ons 3-5 3.2.1 Single-Phase Power Supplies T ABLE 3-4 Specifications (Single-Phase Power Requirements) ( 1 o f 2 ) Name P ower supp ly Pow e r consu.
3-6 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 Power Cabinet SP ARC Enterprise M9000 server (base cabinet + expansion cabinet) 1 200 to 240 VA C ± 10% Single 50/60 +2%, -4% 42.
Chapter 3 Environme ntal and Ele ctrical Specificati ons 3-7 3.2.2 Thr ee-Phase Delta Power Supplies T ABLE 3-5 Specifications (Three-Phase Delta Power Requir ements) Name P ower supply Pow er consump.
3-8 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 3.2.3 Thr ee-Phase Star Power Supplies 3.3 Cooling Specifications 3.3.1 Cooling (Air -Conditioning) Requirements T ABLE 3-7 lists the cooling and air - conditioning r equirements for each system component.
Chapter 3 Environme ntal and Ele ctrical Specificati ons 3-9 3.3.2 Airflow and Heat Dissipation Since the SP ARC Enterprise M8000/M9000 server is de sig ne d t o b e co ol ed by fo r ce d air convection, suf ficient airflow throughout the entir e system must be generated.
3-10 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 ■ The SP ARC Enterprise M9000 server uses internal fa ns in the base cabinet and expansion cabinet, and it generates a tota l airflow of 102 cubic meters per minute (3600 cubic feet per minute [cfm ]) under normal operating conditions.
Chapter 3 En vironmental and Electrical Specificatio ns 3-11 FIGURE 3-2 Cooling Air and Exhaust Flows of SP ARC Enterprise M9000 Server ■ The Power Cabinet draws air from the front of the cabinet and exhausts it at the rea r .
3-12 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 3.4 Facility Power Requir ements This section describes th e power supply requ ir ements for system operation. Obtain the appropriate power supp ly after conf irming the power requirements for the system to be installed.
Chapter 3 En vironmental and Electrical Specificatio ns 3-13 Note – T o connect power cables for this system d i r e c t l y t o y o u r power distribution board, the power cables must be connected on a one-to- one basis as shown in the above figur e.
3-14 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 3.4.1.2 Power Cable Conne ction Specifications T ABLE 3-8 lists specifications for single-phase power supp ly connections. The SP ARC Enterprise M8000/M9000 servers are equipped with the r equired number of single-phase power cables .
Chapter 3 En vironmental and Electrical Specificatio ns 3-15 SP ARC Enterprise M9000 server Japan 3.0m (9.8 fe et) 30A-250V 3P , locking type (NEMA L6-30R) (Base cabinet) 5 (single power fee d) 10 (du.
3-16 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 SP ARC Enterprise M9000 server Europe 3.0m (9.8 fe et) EN60309 (32A) (Base cabinet) 5 (single power feed) 10 (dual power fe.
Chapter 3 En vironmental and Electrical Specificatio ns 3-17 3.4.1.3 Thre e-Phase Power Supply FIGURE 3-6 Three-Phase Delta Power Supply Connections Note – The basic power bus and dual system po wer bus must be connected to diff erent AC power supplies.
3-18 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 Power Cable Connection Specifications Part of the local elec trical work for thr ee-phase power feed is connecti ng the power cable from the power distribution board dir ectly to the Power Cabinet terminal board.
Chapter 3 En vironmental and Electrical Specificatio ns 3-19 3.4.1.4 Three-Phase Star Power Supply FIGURE 3-8 Three-Phase Star Power Supply Connections Note – The basic power bus and dual system po wer bus must be connected to diff erent AC power supplies.
3-20 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 Power Cable Connection Specifications Part of the local elec trical work for thr ee-phase power feed is connecti ng the power cable from the power distribution board dir ectly to the Power Cabinet terminal board.
Chapter 3 En vironmental and Electrical Specificatio ns 3-21 3.4.2 Cir cuit Breaker Capa city and Characteristics As a condition for maintaining the linked protection that would trip a system circuit .
3-22 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 3.4.2.2 Blockade Character of Circuit Br eaker The blockade character of the circuit brea ker is l ong-time delay type. Use a c ircuit breaker which is equivalent to, or slower than, blockade character D (IEC898 or DIN0651 part II) of FIGURE 3-10 .
Chapter 3 En vironmental and Electrical Specificatio ns 3-23 3.4.3 Gr ounding Grounding for Single-p hase Power Supply SP ARC Enterprise M8000/M9000 servers used with a single-phase power supply ships with a grounded (three-wir e) power cable. The power cable must always be connected to a power outlet that has a grounding rec e pta c le .
3-24 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008.
Abbreviations-1 CHAPTER Abbr eviations A ACS AC Section ACSTPH ACS Three-Phase B BP Backplane BUI Browser User Inte rface C CMB CPU Memory Board CMU CPU/Memory Board Unit CLI Command Line Interface CL.
Abbreviations-2 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008 P PCICS PCI Cassette PCI-ES PCI-Express Short PFC Power Factor Correction PHP PCI Hot Plug POST Power-On Self-T .
Index-1 Index A Access route, 1-2 planning, 1-31 Air conditioning floor openings, 1-29 requir ements, 3-8 underfloor, 1-29 C Cabinet stabilization, 1-32 stabilizing, 1-2 Circuit br eaker blockade char.
Index-2 SP ARC Enterpr ise M8000/M9000 Servers Site Planning Guide • April 2008 I Installation specifications, 1-5 M M8000 appearance, 1-7 floor openings, 1-23 footprint, 1-23 installation area, 1-1.
Index-3 signal cables, 2-7 signal line configuration, 2-8 V V entilation underfloor, 3-3 V ibration requir ements, 3-4 X XSCF configuration basic, 2-4 maximum, 2-6 rest ricted, 2-5.
Index-4 SP ARC Enterpr ise M8000/M9000 Servers Site Planning Guide • April 2008.
.
Herausg egeben von / Pu blished by Fujitsu Siemens Co mputers G mbH *U41685-J-Z816-3-76 * U41685 -J-Z816-3- 76 Bestell-N r . / Order N o.: U4168 5-J-Z8 16-3-76.
An important point after buying a device Fujitsu M8000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu M8000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu M8000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu M8000 you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu M8000 will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu M8000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu M8000.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu M8000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu M8000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
