Instruction/ maintenance manual of the product D1321 Fujitsu
Go to page of 21
SYSTEM BOARD D1321 SYSTEM BOARD D1321 TECHNICAL MANUAL TECHNICAL MANUAL.
Sie haben ... ... technische Fragen oder Probleme? Wenden Sie sich bitte an: • Ihren zuständigen Vertriebspartner • Ihre Verkaufsstelle Weitere Informationen finden Sie im Handbuch "Sicherheit, Garantie und Ergonomie". Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw.
.
Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio.
Systembaugruppe D1321 System Board D1321 Technisches Handbuch Technical Manual Deutsch English Ausgabe August 2001 August 2001 edition.
Intel, Pentium und Celeron sind eingetragene der Intel Corporation, USA. Microsoft, MS, MS-DOS und Windows sind eingetragene Warenzeichen der Microsoft Corporation. PS/2 und OS/2 Warp sind eingetragene Warenzeichen von International Business Machines, Inc.
A26361-D1321-Z120-1-7419 Contents Introduction ........................................................................................................................................ 1 Notational conventions ..........................................
.
A26361-D1321-Z120-1-7419 English - 1 Introduction i Depending on the configuration chosen, some of the hardware components described may not be available on your system board. You will find further information in the "BIOS Setup" description.
Important notes 2 - English A26361-D1321-Z120-1-7419 The shipped version of this board complies with the requirements of the EEC directive 89/336/EEC "Electromagnetic compatibility".
Features A26361-D1321-Z120-1-7419 English - 3 Features The components and connectors marked are not necessarily present on the system board. • System board in µ ATX format • mPGA478 Intel processor Pentium 4 with 400 MHz Front Side. Pentium 4 processors support MMX technology and Intel Streaming SIMD Extensions.
Features 4 - English A26361-D1321-Z120-1-7419 • 1 AGP slot The AGP slot supports 1x, 2x and 4x AGP mode. Only AGP boards with 1.5 V are supported. • IDE hard disk controller connected to PCI bus for up to four IDE drives (e.
Features A26361-D1321-Z120-1-7419 English - 5 Internal ports and connectors DIMM 2 PCI 2 PCI 3 PCI 1 AGP DIMM 1 DIMM 3 12 3 4 5 7 6 8 9 10 11 12 13 14 1 = Power supply ATX 2 = Floppy Disk Drive 3 = ID.
Features 6 - English A26361-D1321-Z120-1-7419 Hard disk connection An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for the ultra ATA/66or ultra ATA/100 mode. Ê Connect the end of the cable marked with blue to the system board.
Settings with switches and jumpers A26361-D1321-Z120-1-7419 English - 7 Settings with switches and jumpers 1234 ON Switch 1 = must always be set to off Switch 2 = System BIOS recovery Switch 3 = must always be set to off Switch 4 = must always be set to off i The clock frequency of the processor is set automatically.
Add-on modules 8 - English A26361-D1321-Z120-1-7419 Add-on modules ! Exit Suspend mode, switch off the device and remove the power plug from the mains supply, before carrying out any of the procedures described in this chapter! Even when you have switched off the device, parts (e.
Add-on modules A26361-D1321-Z120-1-7419 English - 9 Installing and removing processors 3 2 1 A 4 5 3 2 1 A 4 5 Ê Pull the lever in the direction of the arrow (1) and lift it as far as it will go (2).
Add-on modules 10 - English A26361-D1321-Z120-1-7419 Upgrading main memory These slots are suitable for DIMM format 32, 64, 128, 256, 512, 1024 MB SDRAM memory modules. Memory modules with different memory capacities can be combined. ! You may only use unbuffered 3.
Add-on modules A26361-D1321-Z120-1-7419 English - 11 Installing network board with WOL Ê Install the network board as described in the operating manual for your unit.
Add-on modules 12 - English A26361-D1321-Z120-1-7419 Replacing the lithium battery ! Incorrect replacement of the lithium battery may lead to a risk of explosion. The lithium battery must be replaced with an identical battery or a battery type recommended by the manufacturer (CR2032).
Glossary A26361-D1321-Z120-1-7419 English - 13 Glossary The technical terms and abbreviations given below represent only a selection of the full list of common technical terms and abbreviations. Not all technical terms and abbreviations listed here are valid for the described system board.
An important point after buying a device Fujitsu D1321 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu D1321 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu D1321 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu D1321 you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu D1321 will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu D1321, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu D1321.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu D1321. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu D1321 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
