Instruction/ maintenance manual of the product Heated Landing Zone HLZ Frymaster
Go to page of 11
OPERATOR’S MANUAL HEATED LANDING ZONE (HLZ) TABLE OF CONTENTS 1. WARRANTY IN FORMATION ............................................................................................ 1 1.1 Warranty Provisions - Heated Landi ng Zone ....................
OPERATOR’S MANUAL HEATED LANDING ZONE (HLZ) THIS OPERATOR’S MANUAL SUPERCED ES ALL PREVIOUS EDITIONS OF THE HLZ OPERATOR’S MANUAL. FOR YOUR SAFETY , DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND NEAR THIS OR ANY OTHER APPLIANCE. DANGER Safe and satisfactory operation of y our equipment depends on its proper installation.
HEATED LANDING ZONE CHAPTER 1: WARRANTY INFORMATION 1 The Frymaster Corporati on makes the following limited warranties to the origin al purchaser only for this equipment and its replacement part s: 1.1 Warranty Provisions – Heated Landing Zone (HLZ) A.
HEATED LANDING ZONE CHAPTER 2: PARTS/SERVICE INFORMATION 2 2.1 Ordering Parts Parts orders may be placed dire ctly with your lo cal Frymaste r Factory Authoriz ed Service Center (FASC)/distributor. A list of Frymaster FASCs/distributo rs wa s included with the unit when sh ipped.
HEATED LANDING ZONE CHAPTER 3: INSTALLATION AND OPERATION 3 The Heated Landing Zone or HLZ is designed to hold assembled sandwiches. By circulating heated air evenly across the open staging area, the Heated Landing Zone keeps sandwiches hot without drying or cooking.
HEATED LANDING ZONE CHAPTER 4: HLZ MODEL/COMPONENT IDENTIFICATION 4 Heat ed air fl ows fro m the air heater/blower and heat rises f rom the he ater plate.
HEATED LANDING ZONE CHAPTER 5: COMPUTER OPE RATION AND PROGRAMMING 5 HLZ Computer. 5.1 Programming Temperatures You are able to program t he setpoint temperature of bot h the air heater and t he heater plate via the computer interface. The heater plate facto ry defaul t is set to the McDonald’s standard of 160 ° F.
HEATED LANDING ZONE CHAPTER 5: COMPUTER OPE RATION AND PROGRAMMING 6 5.2 Operation 1. Press the power button, turni ng the HLZ on (the display will light and cycle thro ugh an initialization sequence). The display will read -LO- until the air heater and h eat er plate are within 15 ° F of setpoint.
HEATED LANDING ZONE CHAPTER 5: COMPUTER OPE RATION AND PROGRAMMING 7 5.3 Switching Between Fahrenheit an d Celsius Te mperature Scales Follow these steps to switch betwe en Fahrenheit and Cel siu s temperature displays (refe r to diagram, HLZ Computer , on Page 5-1): 1.
HEATED LANDING ZONE CHAPTER 6: OPERATOR TROUBLESHOOTING 8 Symptom Possible Cause No computer display; no flow from air tower • No power • Circuit breaker out • Low voltage • Bad fuse • Bad t.
Frymaster, L.L.C., 8700 Line Av enue, PO Box 51 000, Shreveport, Louisiana 71135-1000 Shipping Address: 8700 Line Av enue, Shreveport, Louisiana 71106 TEL 1-318-865-1711 FAX (Parts) 1-31 8-219 -7140 (.
An important point after buying a device Frymaster Heated Landing Zone HLZ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Frymaster Heated Landing Zone HLZ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Frymaster Heated Landing Zone HLZ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Frymaster Heated Landing Zone HLZ you will learn all the available features of the product, as well as information on its operation. The information that you get Frymaster Heated Landing Zone HLZ will certainly help you make a decision on the purchase.
If you already are a holder of Frymaster Heated Landing Zone HLZ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Frymaster Heated Landing Zone HLZ.
However, one of the most important roles played by the user manual is to help in solving problems with Frymaster Heated Landing Zone HLZ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Frymaster Heated Landing Zone HLZ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
