Instruction/ maintenance manual of the product POWER TRIM 600 HD Flymo
Go to page of 9
For all customer enquiries or for replacement parts, contact:- 01325 300303 www .flymo.com customer .services@husqvar na.co.uk POWER TRIM 600 HD IMPOR T ANT INFORMA TION Read before use & reta.
1 Carton Contents IMPORT ANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY P ARTS ARE MISSING CONT ACT :- Husqvarna UK Ltd. Customer Service Department direct T elephone : 01325 300303, Fax : 01325 302530 Safety General 1.
2 4. Immediately disconnect from the mains electricity sup- ply if the cable is cut, or the insulation is damaged. Do not touch the electric cable until the electrical supply has been disconnected. Do not repair a cut or dam- aged cable. Replace it with a new one.
Assembly of Switch Handle to T ube (A1) • Ensure that the internal cable is not twisted. 1. Insert the tube into the switch handle. 2. Push until it clicks into position. • ENSURE THA T THE TUBE IS FULL Y LOCA TED BY A TTEMPTING TO REMOVE IT . Assembly of T rimmer Head to T ube (A2) • Ensure that the internal cable is not twisted.
• WARNING • The use of eye protection is r ecommended. Do not lean over the trimmer whilst trimming or edging, objects may be thrown by the cutting line. Do not allow cutting head to rest on the gr ound. Do not overload your trimmer . Overloading can be avoided by making sure the motor speed does not drop unduly .
T o manually feed the nylon line (M) 1. If required line can be fed out manually . 2. T o operate, press and release manual line feed but- ton, whilst gently pulling on one of the lines until the line reaches the line cutter .
Maintenance S R • WARNING Disconnect from the mains electricity supply , be- fore attempting any maintenance or adjustment. Cutting head continues to rotate after the trimmer has been switched off. Keep fingers and hands clear of the line cutter on leading edge of guard.
Fault Finding Chart WARNING Disconnect fr om the mains electricity supply before attempting any maintenance or adjustment. F AUL T CHECK ACTION Is the automatic line feed work- ing? Manually feed out line.
5103658 -01 Husqvarna UK Ltd. Aycliffe Industrial Park NEWTON A YCLIFFE Co.Durham DL5 6UP ENGLAND T elephone - 01325 302302 Fax - 01325 310339 Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
An important point after buying a device Flymo POWER TRIM 600 HD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Flymo POWER TRIM 600 HD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Flymo POWER TRIM 600 HD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Flymo POWER TRIM 600 HD you will learn all the available features of the product, as well as information on its operation. The information that you get Flymo POWER TRIM 600 HD will certainly help you make a decision on the purchase.
If you already are a holder of Flymo POWER TRIM 600 HD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Flymo POWER TRIM 600 HD.
However, one of the most important roles played by the user manual is to help in solving problems with Flymo POWER TRIM 600 HD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Flymo POWER TRIM 600 HD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
