Instruction/ maintenance manual of the product Cordless Multi-Trim MCT250 Flymo
Go to page of 15
® IMPOR T ANT INFORMA TION Read before use & retain for future reference INSTRUCTION MANUAL.
1 CONTENTS Carton Contents IMPORT ANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY P ARTS ARE MISSING CONT ACT :- Flymo/Partner Customer Servi.
2 SAFETY If not used properly this trimmer can be dangerous! This trimmer can cause serious injury to the operator and others, the warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this trimmer .
3 SAFETY 1 1. Do not attempt to repair the unit including the battery . Nylon line replacement and cleaning the unit are the only items suitable for user maintenance. 12. Do not insert any object into the motor area. Keep free of debris to avoid overheating.
Battery Care 1. If over a period of time the battery quickly runs down after a full 24 hour charging period, a replacement battery is needed. 2. There will be some charge present in the battery but to ensure maximum running time, recharge your trimmer for 24 hours before use.
5 Product Number . . . . . . . . . . . . . . . . . Model Number . . . . . . . . . . . . . . . . . . . Serial Number . . . . . . . . . . . . . . . . . . . Date of Purchase . . . . . . . . . . . . . . . . . Place of Purchase . . . . . . . . . . . . . . .
6 ASSEMBL Y • IMPORT ANT ! Switch charger off at the wall socket before connecting or disconnecting the trimmer to the wall bracket. 1. It is recommended that the wall bracket (G2) should be mounted on a smooth, vertical and internal wall which is strong enough to hold the weight of the product, in a well ventilated area between 5°C and 25°C.
7 ADJUSTMENT 1 . Attach steady handle to product using bolt and handle knob as shown in Fig I. 2. Adjust the steady handle to a comfortable operating position, see Fig J ., by unscrewing the handle knob, springing the side lugs apart, moving the handle to the required position, carefully re-engaging the teeth and then tightening the handle knob.
8 USE How to trim and edge Spool Cap T o start your trimmer 1. Hold as illustrated in Fig M. 2. T o start, press lock-off button (M1) , squeeze the switch lever (M2) , release lock-off button. How to trim 1. Cut with nylon line at an angle using the tip.
Y 1 9 MAINTENANCE T o manually feed the nylon line If required, line can be fed out manually . T o operate, gently pull on the line whilst at the same time alternately pressing and releasing the button, on the side of the spoolholder . See fig V . T o replace nylon line.
10 MAINTENANCE Fault Finding Hints & Service Recommendations Fault Finding Hints 1. Line too short Manually feed out the line. 2. Line broken inside cutting head Remove cap and re-thread line. 3. Line jammed on spool Remove cap and spool and rewind line to remove crossed loops.
If any part is found to be defective due to faulty manufacture within one year of original purchase, Flymo/Partner , through its Authorised Service Repairers will effect the repair or replacement to the customer free of charge providing: (a) The fault is reported directly to the Authorised Repairer .
I, the undersigned P . Howells of Electrolux Outdoor Products, Ayclif fe Industrial Estate, NEWTON A YCLIFFE, Co. Durham. DL5 6UP . Certify that a sample of the above product has been tested and found to comply with directives:- 89/392/EEC, 89/336/EEC, 73/23/EEC Signed at NEWTON A YCLIFFE.
Certificate of Conformity I, THE UNDERSIGNED P . HOWELLS OF ELECTROLUX OUTDOOR PRODUCTS, A YCLIFFE INDUSTRIAL EST A TE, NEWTON A YCLIFFE, COUNTY DURHAM DL5 6UP ENGLAND Certify that the T rimmer 1. Category . . . . . . . . . . . . . . . . . . . . . . .
51 18561-02 (01/99) Electrolux Outdoor Products Ayclif fe Industrial Estate NEWTON A YCLIFFE Co.Durham DL5 6UP ENGLAND T elephone - (00) 44 1325 300303 Fax - (00) 44 1325 310339 UK Customer Helpline -.
An important point after buying a device Flymo Cordless Multi-Trim MCT250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Flymo Cordless Multi-Trim MCT250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Flymo Cordless Multi-Trim MCT250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Flymo Cordless Multi-Trim MCT250 you will learn all the available features of the product, as well as information on its operation. The information that you get Flymo Cordless Multi-Trim MCT250 will certainly help you make a decision on the purchase.
If you already are a holder of Flymo Cordless Multi-Trim MCT250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Flymo Cordless Multi-Trim MCT250.
However, one of the most important roles played by the user manual is to help in solving problems with Flymo Cordless Multi-Trim MCT250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Flymo Cordless Multi-Trim MCT250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
