Instruction/ maintenance manual of the product 44-Elite FireplaceXtrordinair
Go to page of 24
TM 44-Elite Owner's Manual SA FETY NOTICE: If this appliance is not properly installed, a house fire may result. For your safety, follow the installation directions. Contact local building or fire officials about restrictions and installation inspection requirements in your area.
.
Introduction 1 Travis Industries 93508094 4050923 Introduction We welcome you as a new owner of a Fireplace Xtrordinair wood fireplace. In purchasing a Fireplace Xtrordinair you have joined the growing ranks of concerned individuals whose selection of an energy system reflects both a concern for the environment and aesthetics.
2 Safety Precautions Travis Industries 93508094 220602 • This fireplace must be installed by a qualified installer. Installation instructions are shipped inside the fireplace and must be strictly adhered to.
Safety Precautions 3 Travis Industries 93508094 220602 • Do not repair, alter, or replace any part of the fireplace and chimney unless instructions are give in this manual. All other work must be done by a qualified service person. • Allow the fireplace to cool before carrying out any maintenance or cleaning.
4 Table of Contents Travis Industries 93508094 220602 Introduction Introduction ................................................1 Important Information ...................................1 Safety Precautions Safety Precautions ........................
Specifications 5 Travis Industries 93508094 220602 Features: • Maximum Log Length of 32" • Large firebox capacity - 4.3 cu. ft. • Long burn time - from 10 to 12 Hours • Large glass doors .
6 Operation Travis Industries 93508094 4070202 Safety Notice: • I f thi s a ppl i a nce i s not prope rly i nst a ll e d, a house fi re ma y re sul t.
Operation 7 Travis Industries 93508094 220602 Opening the Doors Follow the directions below to open and close the doors. Pull the By-Pass Control all the way out (use gloves or other tool if hot). This helps prevent smoke from spilling into the room. a b c Twist the left handle counter- clockwise.
8 Operation Travis Industries 93508094 220602 Location of Controls Blower Speed Control Summer Fan Switch (optional) Air Control By-Pass Control When hot, use gloves to adjust the controls. Starting a Fire Since the dawn of time man has debated the best way to start a fire.
Operation 9 Travis Industries 93508094 220602 Maintaining Catalytic Burn-Off This fireplace uses a catalytic combustor to increase heat transfer to the room and reduce emissions. The catalytic combustor takes dirty smoke and turns it into extra heat and cleaner emissions.
10 Operation Travis Industries 93508094 220602 Adjusting the Burn Rate Use the air control slider to control the burn rate of the fireplace. See the illustration below for details. Use the air control to change the burn rate. Low Burn High Burn Warning: The air control becomes hot during operation - use gloves or a tool to prevent burns.
Operation 1 1 Travis Industries 93508094 220602 Re-Loading the Fireplace Follow the directions below to minimize smoke spillage while re-loading the fireplace. 1 Pull the by-pass out all the way (use a glove or tool). 2 Move the air control to high. 3 Open the door slightly.
12 Operation Travis Industries 93508094 220602 Selecting Wood Dry Wood is Key Dry wood burns hot, emits less smoke and creates less creosote. Wet Wood Leads To Leads To Dry Wood Leads To Leads To Less.
Operation 1 3 Travis Industries 93508094 220602 Troubleshooting Problem Possible Cause Smoke Enters Room During Start-Up • Cold Air Blockage - burn a piece of newspaper to establish a draft. • By-pass is Closed - Open the by-pass by pulling the ring above the door all the way out.
14 Maintenance Travis Industries 93508094 220602 Daily Maintenance (while fireplace is in use) Check Ash, Remove if Necessary Ash can build up inside the firebox without affecting performance. Generally, remove ash once it has built up over 1" (or more often if desired).
Maintenance 1 5 Travis Industries 93508094 220602 Twice Yearly Maintenance Check Firebrick, Baffle With the fireplace completely cool, remove ash from the firebox (see the instructions on the previous page) and check the firebrick and baffle. Make sure the firebrick is intact.
16 Maintenance Travis Industries 93508094 220602 Check Door Seal, Adjust if Necessary The door latch and door gasket work in conjunction to seal the firebox. If the doors do not seal, air will leak into the firebox and cause the fire to burn too fast.
Maintenance 1 7 Travis Industries 93508094 4060420 Check Chimney for Creosote Build-Up Remove the chimney cap and carefully inspect for creosote build-up over the entire length of chimney. If creosote build-up is over 1/4", the chimney must be thoroughly cleaned.
18 Safety Label Travis Industries 93508094 220602 U .S. ENVIRONMENT AL PRO TECTION A GENCY Certified to comply with July , 1990 particulate emission standards. This wood heater contains a catalytic combustor which needs periodic inspection and replacement for proper operation.
Limited 7 Year Warranty 1 9 Travis Industries 93508094 4070309 To register your TRAVIS INDUSTRIES, INC. 7 Year Warranty, complete the enclosed warranty card and mail it within ten (10) days of the appliance purchase date to: TRAVIS INDUSTRIES, INC., 10850 117th Place N.
20 Optional Equipment Travis Industries 93508094 220602 Temperature Meter The temperature meter displays the temperature of the combustor, allowing the operator to monitor combustor light-off. To obtain a suitable temperature meter, contact the manufacturer listed below: Condar Company P.
Optional Equipment 2 1 Travis Industries 93508094 220602.
22 Index Travis Industries 93508094 220602 Acid Wash ................................................... 6 Adjusting the Burn Rate ............................... 1 0 Air Control (see 'Burn Rate') .......................... 1 0 Amps ........
An important point after buying a device FireplaceXtrordinair 44-Elite (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought FireplaceXtrordinair 44-Elite yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data FireplaceXtrordinair 44-Elite - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, FireplaceXtrordinair 44-Elite you will learn all the available features of the product, as well as information on its operation. The information that you get FireplaceXtrordinair 44-Elite will certainly help you make a decision on the purchase.
If you already are a holder of FireplaceXtrordinair 44-Elite, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime FireplaceXtrordinair 44-Elite.
However, one of the most important roles played by the user manual is to help in solving problems with FireplaceXtrordinair 44-Elite. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device FireplaceXtrordinair 44-Elite along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
