

Personal Series
DESTRUCTEUR DE DOCUMENTS
Série usage personnel
DESTRUCTORA DE DOCUMENTOS
Serie de uso personal

S70-2, P700-2, S50-2, P500-2
USE AND CARE MANUAL
MANUEL D’EMPLOI ET D’ENTRETIEN
MODO DE EMPLEO Y DE CUIDADO
Customer Service: 1-800-955-0959
VEUILLEZ LIRE CE MANUEL ET LE CONSERVER AVEC LE TALON D’ACHAT
Service clientèle (Canada) : 1-800-665-4339
POR FAVOR, LEA Y GUARDE ESTE MANUAL CON EL RECIBO ORIGINAL
Dpto. de Atención al Cliente: 1-800-955-0959

S70-2, P700-2 S50-2, P500-2 Sheet capacity*: 10 7 Shred type: Strip Strip Shred size: 1/4" 1/4" Entry width: 9" 9" Recommended use: 10-20 shredding passes per day Maximum running time: 5-7 min. on / 15 minutes off
*Sheet capacity measured with 20 lb., 8-1/2" x 11" paper with the shredder operating at rated voltage. Different paper weights, humidity, and electrical currents will affect capacity.
S70-2, P700-2 S50-2, P500-2 Capacité de destruction (feuilles)* : 10 7 Type des déchets : Bandes Bandes Dimension des déchets : 6,3 mm 6,3 mm Largeur d’entrée : 230 mm 230 mm Emploi recommandé : 10 à 20 passages de feuilles par jour Cycles d’utilisation conseillés : 5 à 7 minutes marche / 15 minutes arrêt
*Capacité de destruction mesurée pour du papier 20 lb 8-1/2x11" (A4/70gsm), le destructeur fonctionnant sur tension nominale. Les différents grammages du papier, l’humidité et la tension affecteront la capacité.
S70-2, P700-2 S50-2, P500-2 Capacidad de destrucción (hojas)*: 10 7 Tipo de corte: Tiras Tiras Dimensión de corte: 1/4" (6,3 mm) 1/4" (6,3 mm) Ancho de entrada: 9" (230 mm) 9" (230 mm) Uso recomendado: de 10 a 20 pasadas diarias por la destructora Tiempo máx. de funcionamiento: 5-7 min. encendido / 15 min. apagado
*La capacidad de destrucción se calculó con hojas de 20 lb. 8-1/2" x 11" (A4/70gsm), con la destructora funcionando al voltaje nomi- nal. Cambiando el peso del papel, la humedad y el voltaje se afecta tal capacidad.

PARTS OF THE SHREDDER
E
B
F
A. Paper entry B. Basket C. Auto-start sensor
D. Power switch E. Shredder head F. Viewer
To assemble shredder head onto basket: 1. Position shredder head over basket as shown in Figure 1. 2. Lower shredder head onto basket aligning the rim on the underside of the shredder head with the edge of the basket.

This product features an auto-start sensor. This sensor will turn on the cutting blades whenever anything is inserted into the paper entry (while the power switch is in the AUTO (I) position). For the safety of pets and children, we rec- ommend always moving the power switch to OFF (O) and unplugging whenever the shredder is unattended or not in use. 1. Assemble shredder head to basket (see “ASSEMBLY”). 2. Remove any paper clips or other foreign objects (except staples) from paper. If folding paper to fit paper entry, adjust sheet capaci- ty appropriately.
Cool-Down Cycle This shredder is protected with a special safety feature which prevents the motor from overheating with extensive use. When shredding is attempted beyond the machine's maximum running time, the shredder will automatically shut off its motor until it has cooled to an acceptable operating level. This is normal and the shredder will return to operation after the “cool-down” period. See “Product Usage Guide” (page 1) for maximum running time and related cooling or “off” time.
Do not attempt to shred paper clips or other hard materials (except staples) with this machine. Extensive use of paper clips or other hard materials will result in dam- age to the cutting system and will void the manufacturer's warranty. 3. Be sure power switch is in the OFF (O) position. Plug shredder into the proper power supply outlet. 4. Move power switch to AUTO (I) position. As soon as the unit is turned on, it is in autostart mode, ready to be fed paper through the paper entry.
If the shredder sheet capacity is exceeded or paper is not put in straight, a jam may result. See “Product Usage Guide” (page 1) for maximum sheet capacity for your shredder. In the case of a jam, the machine will “bog down” and fail to shred the paper. To clear a jam: 1. Move the power switch to the REVERSE (R) position. (If waste basket is full, empty it before clearing jam.) The shredder will reverse the paper to clear the jam. 2. If the shredder jams in reverse, move the power switch to AUTO (I) and allow to run for about five seconds. If jam does not clear, move power switch to REVERSE (R) again and allow to run for about five seconds. Repeat this procedure until the jam is cleared. If necessary, use care to grasp the paper carefully and pull out to clear the jam. 3. Once the jam is cleared, move the power switch to AUTO (I) for continued shredding or OFF (O) if shredding is complete.
NEVER insert hands or fingers into paper entry as serious personal injury may result. Do not exceed recommended sheet capacity (see “Product Usage Guide” on page 1).
of 5-7 minutes. At this time, the machine MUST be allowed to “cool down” for a MINIMUM of 15 minutes. (See “Cool- Down Cycle” section for more information.) If the shredder jams or shuts off before the maximum shredding
time, see “Clearing a Jam” section for further instructions.

TROUBLESHOOTING LIMITED WARRANTY Fellowes Manufacturing Company (the “Company”) warrants the cut- ting cylinders of the machine to be free from defects in material and workmanship for 3 years from the date of purchase by the original consumer. Fellowes warrants all other parts of the machine to be free of defects in material and workmanship for 1 year from the date of purchase by the original consumer. If any part is found to be defec- tive during the warrant period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling or unau- thorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF MER- CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequen- tial or incidental damages attributable to this product. This warranty gives you specific legal rights. You may have other legal rights that vary from state to state. For more detail or to obtain service under this warranty, please con- tact Fellowes Customer Service at 1-800-955-0959, Monday through Friday, 8 AM - 5 PM (Central Standard Time). For specific instructions on obtaining service under this warranty on machines purchased outside the USA, contact the appropriate location listed in the Contact for Service section of this instruction manual. Warrantor: Fellowes, Inc.
Shredder will not operate.
a. Shredder is not plugged in. b. Power switch is in the OFF (O) posi-
tion. Move switch to AUTO (I) posi- tion. c. Shredder is jammed. See “Clearing a Jam” section. d. Shredder has exceeded the maxi-
mum run time and requires a “cool- down” time. See “Product Usage Guide” (page 1).
Shredder suddenly stops while shred- ding.
a. Shredder has exceeded the maxi-
mum run time and requires a “cool- down” time. See “Product Usage Guide” (page 1). b. Shredder is jammed. See “Clearing
a Jam” in the OPERATION section.
Shredder operates only in REVERSE.
A small piece of paper may be blocking the auto-start sensor of this shredder. Move the power switch to the OFF (O) position and unplug the shredder. Turn shredder over and use a toothpick (from the underside of the unit) to clear the paper blockage at the auto-start sensor (center) location .
A small piece of paper may be causing the auto-start feature to run continuous- ly. Move the power switch to the OFF (O) position and unplug the shredder. Use a toothpick (from the top of the unit) to clear the paper blockage at the auto- start sensor (center) location .
Shredder runs contin- uously when in AUTO.

United States 1-800-955-0959 Canada 1-800-665-4339 Australia 1-800-33-11-77
1789 Norwood Avenue • Itasca, Illinois 60143-1095 630-893-1600
Australia Benelux Canada France Germany Italy Japan Poland United Kingdom
Tullamarine, Vic Vianen, NL Markham, Ont. Rennes, I-V Garbsen, Han. Camerano, AN Tokyo Warsaw Doncaster, S. Yorks.
© 2001 Fellowes. Printed in China. Form No. 30105
®
Common problems, likely causes, and what to do.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.