
NOTICE D'UTILISATION MANUAL DEL PROPIETARIO
BETRIEBSANLEITUNG


ENGLISH Paper shredder Fellowes 520/520C 3–8
FRANÇAIS Déchiqueteuse Fellowes 520/520C 9–14
ESPANÕL Destructora de documentos Fellowes 520/520C 15–20
DEUTSCH Aktenvernichter Fellowes 520/520C 21-26


2. Parts Identification

1. Read all instructions before use. 2. Save these instructions for later use. 3. Follow all warnings and instructions marked on the product. 4. Unplug this product from the wall outlet before cleaning. Clean with a damp cloth using a mild soap and water solution. (Do not use abrasives or petroleum based cleaners.) 5. Place this product as close as possible to power source for quick and easy unplugging. 6. Do not use this product near water. 7. This product should never be placed near or over a radiator or heat source. 8. Operate from the type power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local electricity board. 9. Do not allow anything to rest on the power cord. Do not place this product where people may walk on the cord. 10. If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating. 11. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous live parts or other risks. 12. Unplug this product and refer servicing to qualified personnel under the following conditions: A) When the power cord or plug is damaged or frayed. B) If liquid has been spilled on the product. C) If the product has been exposed to rain. D) If the product does not operate normally when the operating instructions are followed. E) If the product has been dropped or the casing has been damaged. 13. Keep out of the reach of children. 14. This shredder should be operated only with an operator in attendance. 15. Do not use flammable synthetic oil, petroleum- based products, or aerosols of any kind on or near shredder at any time.
Fellowes Manufacturing Co. 1789 Norwood Avenue Itasca, IL 60143 USA
Cut material bag full
Paper jam – electric motor overloaded
Front door not closed
shredder is switched on – cutting system
cutting head stops – shredder remains
cutting system runs in reverse

520 Paper shredder 520C
Model 520 Model 520C
Cutting style Strip cut Cross cut
Shred size 5/32" 1/4" 5/32" x 2" (3.9 mm) (5.8 mm) (3.9 x 50 mm)
*Sheet capacity - U.S. (75 g/m2) 28 38-40 26-28 Europe (70 g/m2) 35 50 32
Speed 32 FPM 25 FPM (143 mm/s) (100 mm/s)
Entry width 16"(400 mm)
Motor power 120 V / 60 Hz units: 2.25 HP 230/240 V / 50 Hz units: 1,6 kW
Input voltage 120 V, 60 Hz (Depending on country) 230 V, 50 Hz
Dimensions (H x W x D) 361/4" x 231/2" x 181/2" (921 x 597 x 470 mm)
Weight 179 lbs. (81 kg) 206 lbs. (93 kg)
Waste container volume 41.2 gallons (156 liters)
Noise level In idle 60dB Under load 68 dB strip cuts and 75 dB cross cuts
*Paper DIN 19307 SM 4a – 70

7. Operation
– Bags for cut material (Packed in dispenser carton, 50 or 100 bags to a roll depending on size. Contact Fellowes or your local Fellowes dealer for the stock number of the bag that fits your machine.) – Cutting block oil for cross-cut units Stock # 35250
Read operating instructions before putting shredder into operation
Insert plug in power outlet
Install waste bag for shredded material
– Open front door and completely remove
bag frame from cabinet – Fold new bag around frame.
– Refer to separate set–up instructions for proper assembly – Operate this product only from the type of power source indicated on the marking label – Install the paper shredder so that the plug is easily accessible – Shredder must be operated only in upright position – Set up paper shredder so that the ventilation slots are unobstructed. To ensure sufficient ventilation of the shredder a minimum distance of 4" (10 cm) to the wall or to the furniture must be maintained.
Allow bag to overhang frame by appoximately 7" (20 cm). – Slide frame with bag back into cabinet – Close cabinet door.
– Set main power switch (located on back of shredder) to ON (1) position. – (On the 520 HS, the security key lock switch must also be turned on)
Never insert hand, fingers or any foreign objects into the feed opening. Serious injury may result.
– Press green arrow button at least 4 sec
Keep all loose articles of clothing, ties, jewelery, long hair or other loose objects away from feed opening. Injury may result.
– Insert paper into the paper feed opening
Always turn off and unplug the machine before moving, servicing, cleaning or any other conduct other than normal operation. Serious injury may result.
When the paper feeding opening is free again, the cutting system automatically switches off after approx. 3 sec. and returns to standby.
When shredding is completed
– Push stop button
– Set main power switch (located on back
of shredder) to OFF (0) position.

520 Paper shredder 520C
– Press green arrow button at least 4 sec
– Pass the leading edge of the form under
the paper guide roller (1) and into the paper feed opening (2).
Cabinet door contact ajar / bag full

– Press green arrow button at least 4 sec
(Cross cut unit only)
– When shredding capacity drops or the
noise increases. • Apply oil over full width of cutting cylinders through the paper entry (Fellowes Powershred Lubricant # 35250). CAUTION: Do not use flammable synthetic oil, petroleum-based products, or aerosol lubricants of any kind.
Red LED on keyboard lights • Shredder reverses automatically and runs in this mode for a few seconds.
Do not attempt to force the jammed material through the machine by alternating the cutting system between forward and reverse.
If paper jam cannot be removed
If the equipment does not work properly, please check the following points first:
– Is the plug inserted? – Is the switch turned on? – Is the cabinet door closed? – Is the waste receptacle full? Empty waste bag. – Is there a paper jam in the shredder? See Malfunctions – Is the motor overheated? Switch machine off and allow motor to cool down for approximately 15-20 min.
If none of the above applies and the equipment still does not run, please contact our customer service department.
Red LED on keyboard lights

12. Contact for Service
Limited Warranty Fellowes, Inc. warrants the cutting cylinders of the machine to be free from defects in material and workmanship for 20 years from the date of purchase by the original consumer in the case of models 320, 320C, 380, 380C, 420, 420C, 520 and 520C or 5 years from the date of purchase by the original purchaser in the case of models 320HS, 420HS and 480HS. Fellowes warrants all other parts of the machine to be free of defects in material and workmanship for 2 years from the date of purchase by the original consumer (applies to all models covered in this manual). If any part is found to be defective during the warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling or unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. IN NO EVENT SHALL FELLOWES BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ATTRIBUTABLE TO THIS PRODUCT. This warranty gives you specific legal rights. You may have other legal rights that vary from this warranty. The duration, terms and conditions of this warranty are valid worldwide, except where different limitations, restrictions or conditions may be required by local law. For more details or to obtain service under this warranty, please see below. Fellowes offers toll free consumer service in the following regions: United States, Canada, Mexico, Australia, and Europe. Residents in these regions should contact the appropriate Consumer Helpline located on the back of this manual. If you are unable to access the Consumer Helpline from your calling area, call the nearest Fellowes location, also listed on the back of this manual. You may also contact your local dealer, contact us online at www.fellowes.com or write to us at: Fellowes, Inc. ATTN: Customer Service 1789 Norwood Avenue Itasca, IL 60143 USA
Europe 00 800 1810 1810
Australia 011-613 93303211 Benelux 011-31-3473-77988 Canada 905-475-6320 France + 33 (0) 2-99-22-71-22 Germany + 39 (0) 5131-4977-0 Italy + 39 (0) 071-730041 Japan 011-81-3-5496-2401 Korea 82-2-3464-2884 Poland + 48-22-837-7356 Singapore 65-6221-3811 United Kingdom + 44 (0) 1302-836836

Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.