EN
Fellowes logo
Official user manual

Fellowes 280CC

11 pages·127 KB·Paper Shredder·PDF·ENDEFRITNLJA
Fellowes 280CC
Table of Contents 22 sections Powershred · Console Shredders · 220/220CC 280/280CC 320/320CC 380/380CC · Operating Instructions · … ShowHide
Page 1 of the Fellowes 280CC user manual — 220/220CC 280/280CC 320/320CC 380/380CC
Page 1 · click to enlarge
Page 1

Powershred

Console Shredders

220/220CC 280/280CC 320/320CC 380/380CC

Operating Instructions

Mode d’emploi

Instrucciones de funcionamiento

Bedienungsanleitung

Bedieningsinstructies

Istruzioni sul funzionamento

® · ®

Page 2 of the Fellowes 280CC user manual — Powershred
Page 2 · click to enlarge
Page 2

English Important Safety Instructions 3 Parts Identification 4 Technical Specifications 5-6 Installation, Operation 7 Checklist for Inoperative Machine 8 Maintenance, Supplies, Warranty 9 Declaration of Conformity 10 Contact For Service 51 Français Consignes de sécurité importantes 11 Identification des pièces 12 Caractéristiques techniques 13-14 Installation, Mode d’emploi 15 Liste de contrôle lorsque l’équipement ne fonctionne pas 16 Entretien, Fournitures, Garantie 17 Déclaration de Conformité 18 Contact For Service 51 Español Medidas de seguridad importantes 19 Identificación de las piezas 20 Especificaciones 21-22 Instalación, Modo de empleo 23 Procedimiento en caso de funcionamiento incorrecto 24 Mantenimiento, Artículos consumibles, Garantía 25 Declaración de conformidad 26 Contact For Service 51 Deutsch Wichtige Sicherheitshinweise 27 Identifizierung der Teile 28 Technische Daten 29-30 Montage und Aufstellung, Betrieb 31 Checkliste für betriebsunfähige Geräte 32 Wartung, Materialien, Garantie 33 Konformitätserklärung 34 Contact for Service (Service Adressen) 51 Nederlands Belangrijke veiligheidsinstructies 35 Onderdelen 36 Specificaties 37-38 Installatie en bediening van de machine 39 Checklist voor een niet-functionerende papiervernietiger 40 Onderhoud, Toebehoren, Garantie 41 Verklaring van Conformiteit 42 Contact For Service 51 Italiano Importanti istruzioni sulla sicurezza 43 Identificazione dei pezzi 44 Specifiche tecniche 45-46 Installazione, Funzionamento 47 Lista di controllo per apparecchi non funzionanti 48 Manutenzione, Accessori, Garanzia 49 Dichiarazione sulla conformità 50 Contact For Service 51 2

Page 3 of the Fellowes 280CC user manual — Powershred
Page 3 · click to enlarge
Page 3

Important Safety Instructions 1. Read all instructions before use. 2. Save these instructions for later use. 3. Follow all warnings and instructions marked on the product. 4. Unplug this product from the wall outlet before cleaning. Clean with a damp cloth using a mild soap and water solution. (Do not use abrasives or petroleum based cleaners.) 5. Place this product as close as possible to power source for quick and easy unplugging. Do not block the power supply receptacle; it must be possible to conveniently unplug the power cord. 6. Do not use this product near water. 7. This product should never be placed near or over a radiator or heat source. 8. Operate from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local electricity board. 9. Do not allow anything to rest on the power cord. Do not place this product where people may walk on the cord. 10. If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating. Also, make sure that the total of all products plugged into the wall outlet does not exceed 15 amps. 11. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous live parts or other risks. 12. Unplug this product and refer servicing to qualified personnel under the following conditions: A) When the power cord or plug is damaged or

  • Caution 1. This shredder utilizes a safety interlock switch which lights the red indicator light and stops power to the motor when the door is opened. Do not attempt to override this safety feature. 2. The electronic circuitry in this shredder performs several functions:
  • Senses the presence of paper in the shredder inlet and automatically starts shredding and then stops the shredder approximately 3 seconds after the paper has passed through.
  • Controls the safety functions of the shredder.
  • Operates the indicator lights.
  • (In 320 and 380 series only) Monitors the amount of electrical current being used and stops the motor if too much paper has been put into the shredder or a jam has ocurred. 3. The automatic start function of this shredder uses an infrared sensor in the inlet to detect the presence of paper. If a strong light or sunlight is allowed to shine directly into the inlet, the sensor may give a false indication and start the shredder. If this occurs, it does not present a safety hazard. The cover over the inlet will ordinarily prevent this false indication from occurring. If the shredder is in a position where sunlight or a strong lamp shines on the front of the shredder from such a low position that the light reaches down into the inlet:
  • Move the shredder or the light to a different position, OR
  • Turn the rocker switch to the off position when not in use. CAUTION: Do not insert aerosol cleaners or lubricants into or around the machine. Some agents may combust, causing serious injury.

frayed. B) If liquid has been spilled on the product. C) If the product has been exposed to rain. D) If the product does not operate normally when

the operating instructions are followed. E) If the product has been dropped or

the casing has been damaged. 13. Keep out of the reach of children. 14. This shredder should be operated only with an operator in attendance.

Page 4 of the Fellowes 280CC user manual — Parts Identification 1) Indicator Lights 2) Rocker Switch 3) Cover 4) Cabinet
Page 4 · click to enlarge
Page 4

Parts Identification 1) Indicator Lights 2) Rocker Switch 3) Cover 4) Cabinet

5. Cabinet Access Door 6) Paper Feed Opening 7) Power Supply Receptacle 8) Circuit breaker (models 320-380 only)
Page 5 of the Fellowes 280CC user manual — Model 220 220CC 280 280CC
Page 5 · click to enlarge
Page 5

Technical Specifications

Model 220 220CC 280 280CC

Cutting StyleStripCross CutStrip Shred Size Inches Millimeters1/4 5.995/32 3.95/32 x 1-1/4 3.9 x 321/4 5.995/32 3.9 Sheet Capacity 8-1/2” x 11” 20 lb. A4/70gr14-16 16-1812-14 14-168-10 9-1114-16 16-1812-14 14-16 Speed 115V, 60Hz22 FPM22 FPM22 FPM Entry Width Inches Millimeters10 (254)10 (254)15 (381) Motor Power 120V 220-240V1/4 hp (0.15 kW) Input voltage (Depending on country)100V 50/60Hz 120V 60Hz 220-240V 50Hz Dimensions Inches Millimeters32-3/8 H x 17-3/4 W x 16 D 822 H x 451 W x 406 D Weight Pounds Kilograms73 83 33 37.6 Waste Container Vol. Gallons Liters18.24 69.0 Reorder bag number36054
Page 6 of the Fellowes 280CC user manual — Technical Specifications
Page 6 · click to enlarge
Page 6
Technical Specifications Model 320 320CC 380 380CC Cutting Style Strip Cross Cut Strip Cross Cut Shred Size Inches 1/4 5/32 5/32 x 1-1/4 1/4 5/32 5/32 x 1-1/4 Millimeters 5.99 3.9 3.9 x 32 5.99 3.9 3.9 x 32 Sheet Capacity 8-1/2” x 11”, 20 lb. 18-20 16-18 10-12 18-20 16-18 10-12 A4/70gr 20-22 18-20 12-14 20-22 18-20 12-14 Speed 115V, 60Hz 22 FPM 22 FPM 22 FPM 22 FPM Entry Width Inches 10 10 15 15 Millimeters (254) (254) (381) (381) Motor Power 120V 2/5 hp 2/5 hp 220-240V (0.28 kW) (0.28 kW) Input voltage 100V 50/60Hz 100V 50/60Hz (Depending on 120V 60Hz 120V 60Hz country) 220-240V 50Hz 220-240V 50Hz Dimensions Inches 32-3/8 H x 17-3/4 W x 16 D 32-3/8 H x 23 W x 16 D Millimeters 822 H x 451 W x 406 D 822 H x 584 W x 406 D Weight Pounds 78 88 92 102 Kilograms 35.3 39.8 41.8 46.3 Waste Container Vol. Gallons 18.24 24.75 Liters 69.0 93.7 Reorder bag number 36054 36056 StripCross CutStripCross Cut 1/4 5.995/32 3.95/32 x 1-1/4 3.9 x 321/4 5.995/32 3.95/32 x 1-1/4 3.9 x 32 18-20 20-2216-18 18-2010-12 12-1418-20 20-2216-18 18-2010-12 12-14 22 FPM22 FPM22 FPM22 FPM 10 (254)10 (254)15 (381)15 (381) 2/5 hp (0.28 kW)2/5 hp (0.28 kW) 100V 50/60Hz 120V 60Hz 220-240V 50Hz100V 50/60Hz 120V 60Hz 220-240V 50Hz 32-3/8 H x 17-3/4 W x 16 D 822 H x 451 W x 406 D32-3/8 H x 23 W x 16 D 822 H x 584 W x 406 D 78 88 35.3 39.892 102 41.8 46.3 18.24 69.024.75 93.7 3605436056
Page 7 of the Fellowes 280CC user manual — Caution
Page 7 · click to enlarge
Page 7
  • Installation
  • Plug one end of the enclosed power cord (inside the waste box) into the power supply receptacle in the back of the shredder.
  • Screw casters into the nuts provided on the underside of the shredder.
  • Operate this product only from the type of power source indicated on the marking label.
  • Install the paper shredder so that the plug is easily accessible.
  • Operate shredder only in the upright position.
  • Set up paper shredder so that the ventilation slots are unobstructed. To ensure sufficient ventilation of the shredder, maintain a minimum distance of 4” (10 cm) from walls or furniture on each side of the shredder.

Operation

Read operating instructions before putting shredder into operation.

Insert power cord into power supply receptacle on the back of the shredder.

Insert plug into power outlet.

  • Install waste bag for shredded material
  • Open door and completely remove wastebox from cabinet.
  • Fold new bag around frame. Allow bag to overhang waste box by approximately 7” (20 cm).
  • Slide box with bag back into cabinet.
  • Close cabinet door.

Caution

Never insert hand, fingers or any foreign objects into the feed opening. Serious injury may result.

Keep all loose articles of clothing, ties, jewelry, long hair or other loose objects away from feed opening. Injury may result.

  • Press rocker switch to (I)
  • Switch locks in “on” position
  • Equipment is ready for operation (stand by)
  • Green LED lights
  • Feed paper
  • The shredding process is started by photo-cells in the paper feed opening. Insert paper and shredding begins automatically.
  • When the shredding is complete, the cutting system automatically stops after approximately 3 seconds.

Always turn off and unplug the machine before moving, servicing, cleaning or any other conduct other than normal operation. Serious injury may result.

  • Press rocker switch to (O)

Switching equipment On · Switching equipment Off

Page 8 of the Fellowes 280CC user manual — 220, 220CC, 280, 280CC If only the green light is on:
Page 8 · click to enlarge
Page 8

Checklist for Inoperative Machines

  • All Machines If no indicator lights are lit:
  • Make sure the plug is securely inserted in the receptacle on the back of the machine and into the wall outlet.
  • Make sure the shredder is on (switch in “I” position).

Overheated: • If the motor is overheated, switch the machine off and allow motor to cool down for approximately 15- 20 minutes.

320,320CC, 380, 380CC If no lights are on: • Make sure the circuit breaker is not open. (press to reset).

If both the red and green lights are on:

  • Waste Box Full:
  • Press rocker switch to “O” to stop the cutting system.
  • Remove wastebox from inside cabinet and empty.
  • Return wastebox, close door and resume operation. Door Ajar:
  • Make sure door is completely closed.
  • If the door is opened while the motor is running, after closing the door, set the rocker switch to the “O” position and then to the “I” position to resume operation.

If only the red light is on:

  • Paper Jam:
  • Press rocker switch to “O” to stop the cutting system.
  • Press and hold down rocker switch in “R” to reverse the cutting system and back out jammed material (paper is pushed out). Rocker switch must be held in reverse for a few seconds to cause the red light to turn off.
  • If the jam persists, slowly move the power switch back and forth between forward (I) and reverse (R), always stopping for a moment in the off position (O). Do not switch the shredder rapidly between forward and reverse to force material through the shredder. Rapid rocking develops tremendous forces that can damage your shredder.
  • Continue shredding in smaller quantities so as not to jam the machine further. Overheated:
  • If the motor is overheated, switch the machine off and allow motor to cool down for approximately 1520 minutes.

220, 220CC, 280, 280CC If only the green light is on:

  • Paper Jam:
  • Press rocker switch to “O” to stop the cutting system.
  • Press and hold down rocker switch in “R” to reverse the cutting system and back out jammed material (paper is pushed out)
  • If the jam persists, slowly move the power switch back and forth between forward (I) and reverse (R), always stopping for a moment in the off position (O). Do not switch the shredder rapidly between forward and reverse to force material through the shredder. Rapid rocking develops tremendous forces that can damage your shredder.
  • Continue shredding in smaller quantities so as not to jam the machine further.
Page 9 of the Fellowes 280CC user manual — Warranty
Page 9 · click to enlarge
Page 9

Maintenance

of one year from the date of purchase by the original consumer. At it’s option, Fellowes will repair or replace without charge for material or labor, any component found to be defective during the warranty period. Additionally, the cutting cylinders are warranted for 5 years from the original purchase date and will be replaced without charge for material or labor if found by Fellowes to be defective.

(Cross Cut Units Only) Shredder Oiling Instructions When shredding capacity drops, noise increases,

  • or if the cutting cylinders stop with a squeak or a rubbing sound, the cutters should be oiled.
  • When lubricating the cutters, utilize POWERSHRED lubricant #35250 or a suitable substitute, i.e., a light weight machine oil or a sewing machine oil. Do not spray an aerosol cleaner or lubricant into the machine. Some agents may combust, causing serious injury. Make certain an extension nozzle is provided so the lubricant can reach well into the throat of the machine.
  • Squeeze the lubricant across the full width of the cutters and then turn the machine on and run the cutting system forward for a few seconds (the photo eye must be blocked with a piece of paper in order to run the cutting system forward).
  • Then depress the rocker switch in the reverse direction and run the cutting system in reverse for a few seconds. Repeat the procedure.

Warranty Exclusions The parties agree that the buyer’s sole and exclusive remedy against Fellowes shall be for the repair or replacement of defective parts as provided herein. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to property or any other incidental or consequential loss) shall be available to him. This warranty shall NOT apply and is void under the following circumstances: 1. When this product or any part thereof has been subjected to accident, alteration, abuse, or misuse. 2. When the shredder's recommended sheet capacity (per specifications on page 5-6) has been exceeded (resulting in a paper jam). 3. When the original Model and Serial Number Plate has been altered, effaced or removed. 4. When repair or service covered under this warranty (other than routine maintenance as described in the Owner's Manual) has been performed by personnel without the express written consent of Fellowes. 5. When the product has been used pursuant to any verbal or written rental, lease or loan agreement.

  • Supplies
  • Bags for cut material (Packed in dispenser carton, 50 bags to a roll. Contact Fellowes or your local Fellowes dealer for the stock number of the bag that fits your machine.)
  • Cutting block oil for cross-cut units: Stock #35250
  • Replacement wasteboxes and handles are available from Fellowes. Please call Fellowes customer service for ordering information.

This warranty described herein shall be in lieu of any other warranty, expressed or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. Any representations or promises inconsistent with or in addition to this warranty are unauthorized and shall not be binding upon Fellowes.

Warranty

Fellowes Powershred Limited Warranty 1 year on all parts and labor 5 years parts and labor on cutting cylinders

Fellowes warrants this product to be free from defects in material and workmanship for a period

Page 10 of the Fellowes 280CC user manual — Declaration of Conformity
Page 10 · click to enlarge
Page 10

Declaration of Conformity

Doncaster Road, Kirk Sandall Doncaster, South Yorkshire, DN31H England

declares that the product Models Powershred 220, 220CC, 280, 280CC, 320, 320CC, 380 and 380CC, conform with the requirements of the Low Voltage Directive (73/23 EEC) and the Electromagnetic Compatibility

Directive (89/336 EEC) and the following harmonized European Normes (EN Standards) and IEC Standards.

SafetyEN60950 ‘Information Technology Equipment’

EMC: Standard Severity Level Performance Criteria EN 55014:1995 See Details Below See Details Below EN 55014-2:1997 EN 61000-4-2:1995 4kV Contact, 8kV Air B + A1:1998 EN 61000-4-4:1995 1kV 5/50ns, 5kHz, AC Mains B ENV 50142:1994 1kV Differential Mode (Line-Line) B EN 61000-4-5:1995 2kV Common Mode (Line-Gnd) ENV 50141:1993 3V, 150kHz to 230MHz A EN 61000-4-6:1996 80% 1kHz Modulation EN 61000-4-11 10ms dropout, 200ms 60% C variation, 1 sec 30% variation. EN 55014-1:1993 Household Limits, Table 1&2 N/A +A1:1997 +A2:1998 EN 61000-3-2:1995 Class A, Section 7.1 Table 1 N/A +A1:1998 +A2:1998 EN 61000-3-3:1995 Section 5 N/A

Itasca, Illinois, USA May 15, 1999 Anthony Storrie

Fellowes Manufacturing Company

Page 11 of the Fellowes 280CC user manual — Contact For Service:
Page 11 · click to enlarge
Page 11

Contact For Service:

United States 1-800-955-0959 Australia (In Melbourne) (03) 9330-3211 (Outside Melbourne) 1-800-331-177 Canada 1-800-665-4339 United Kingdom 01302-885 331 Japan +81-3-5496-2401 Benelux +31-(0)347-377988 Italy +39-071730041 Germany +49-5131-49770 France +33-(0)4-72-08-25-45

  • 1789 Norwood Avenue
  • Itasca, Illinois 60143-1095 630-893-1600
  • Customer Service 1-800-955-0959 <a href="http://www.fellowes.com" rel="nofollow noopener" target="_blank">http://www.fellowes.com</a>

Australia Benelux Canada Deutschland France Italy Japan United Kingdom Tullamarine, Vianen, Markham, Hanover, Montanay, Via Dante Alighieri, Tokyo Doncaster, Victoria The Netherlands Ontario Garbsen Lyon Camerano (An) South Yorkshire

© 1999 Fellowes Printed in U.S.A. Part No. 34288

®

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Fellowes 280CC

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Fellowes 280CC

Be the first to ask — other owners or our team will answer.

Original document

Fellowes 280CC manual PDF

11 pages·127 KB·Paper Shredder·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…