Instruction/ maintenance manual of the product FM741B Fantom Vacuum
Go to page of 18
HOUSEHOLD USE ONLY IMPORT ANT SAFETY INSTRUCTIONS NAME OF EACH P ART PREPARA TION BEFORE USE USING THE VACUUM CLEANER USING THE A TTACHMENTS EMPTYING THE DUST COMP ARTMENT CLEANING THE FILTERS CLEARIN.
IMPORT ANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following. READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER WARNING - T o reduce the risk of fire, electric shock or injury: 1.
2 16. Do not touch the agitator while it is spinning. 17. Do not place any heavy items on top of the vacuum cleaner. 18. Do not step on the hose or pull it too strongly . 19. Do not pick up items such as pieces of waste paper or cloth which look as though they may cause the hose to become blocked.
Set the O N/OFF switch to " ON " to light the headlight. 3 NAMES OF EACH P ART W ARNING: Operate vacuum cleaner only at the voltage specified on name plate.
Attaching the handle PREP ARA TIONS BEFORE USE Caution : Do not connect the power cord plug to the wall outlet until assembly is completed. Attaching th e suction hose A & attachments 4 1 2 Set the vacuum cleaner to the upright position. lnsert the handle as shown in the illustration.
Secure the power cord plug on the power cord. WARN ING: T o re duce the risk of e lectric shock, this appliance ha s a polarized plu g (o ne b lade is w ider than the other). This plug will fit in a po larized outlet only one way . If the plug does not fit f ully in th e outlet, reverse the plug.
6 USING THE V ACUUM CLEANER ON/OFF SWITCH Start or st op vacuum cleaner by pushing on the swi tch. ADJUSTING THE HANDLE Upright po sition The handle is normally locked in this The handle of this vacuum cleaner can be set to one of three positions -Upright, Normal, Parallel.
1 2 RUG/FLOOR (T OOLS)SELECTOR The RUG/FLOOR(TOOLS)selector should only be adjusted while the vacuum cleaner is turned on and in the upright position. When cleaning a rug or carpet,first turn the ON/OFF switch to the ON position,and then set the RUG/ FLOOR(TOOLS)selector to the RUG position.
1 2 3 USING THE A TT ACHMENTS Caution: When using one of the attachments during cleaning,set the vacuum cleaner to the upright position. Press the release button C to disconnect the handle from the vacuum cleaner . Remove the attachments from the vacuum cleaner.
1 3 2 4 1 2 1 3 2 4 1 2 Trapdoor Release Lever Duster Handle Turn the duster handle several times in the direction shown to empty the dust compartment. EMPTYING THE DUST COMP ARTMENT Caution: Be sure to turn the ON/OFF switch to the "OFF" position and disconnect the power cord from the wall outlet before cleaning.
Remove the dust compartment.(refer to page 9) Clean the filter fins free of dirt with the forked end of cleaning utensil as shown. Prefilter Dust Compartment Ribs Main Filter 1 1 CLEANING THE FIL TERS 2 Set the dust compartment to the parallel position.
Caution: Be sure to turn the ON/OFF switch to the "OFF" position and disconnect Cleaning the agitator assembly 1 2 3 CLEARING BLOCKAGES AND CLEANING THE A GIT A T OR ASSEMBL Y the power cord from the wa ll outlet before clearing any blockages in the suction hose and cleaning th e agitator assembly .
REPLACEMENT INSTRUCTIONS Caution: Be sure to turn the ON/OFF switch to the"OFF" position and disconnect the power cord from the wall outlet before replacing any of the parts below . REPLACING THE HEADLIGHT LAMP 1 Set the vacuum cleaner to the parallel position.
1 2 3 4 5 Bearing Holder Groove Nozzle Head REPLACEMENT INSTRUCTIONS Caution: Be sure to turn the O N/OFF swit ch to the"OFF" position and disconnect the po wer cord fro m the wall outlet before replacing an y of the parts be low . REPLACING THE FLA T BEL T Remove the bottom plate.
14 2 4 1 3 1 2 3 REPLACEMENT INSTRUCTIONS REMOVING THE BOTT OM PLA TE Set the vacuum cleaner to the parallel position and turn it over . Slide the latch in the direction of the arrow.
Caution: Be sure that seal on the HEPAfilter is inserted towards the inside of the vacuum cleaner. The filter cover should be correctly oriented when it is reattached. Do not reattach it upside down. 3 Insert a new HEPA filter with the seal to the inside of the vacuum cleaner.
9BF-D-P11 1-00721 0304- If there is a problem with the vacuum cleaner, carry out the following checks to find the cause. If the problem still persists after the checks have been made, do not use the vacuum cleaner to prevent the possibility of an accident occurring.
ONE (1) YEAR LIMITED WARRANTY FANTOM warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions.
An important point after buying a device Fantom Vacuum FM741B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fantom Vacuum FM741B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fantom Vacuum FM741B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fantom Vacuum FM741B you will learn all the available features of the product, as well as information on its operation. The information that you get Fantom Vacuum FM741B will certainly help you make a decision on the purchase.
If you already are a holder of Fantom Vacuum FM741B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fantom Vacuum FM741B.
However, one of the most important roles played by the user manual is to help in solving problems with Fantom Vacuum FM741B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fantom Vacuum FM741B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
