Instruction/ maintenance manual of the product AT-PWR14 Allied Telesis
Go to page of 2
Overview The AT-PWR14, shown in Figure 1, is an AC re dundant power supply (RPS) used with the AT-CV5000 chassis o nly. When installed, the module ope rates in a standby mode. If the standard power supply fails or loses power, the AT- PWR14 module changes fr om standby to active and provides all powe r to the system to prevent a network failure .
Powering On an AC Powered Chassis To power on an AC powere d chassis, perform the following pro cedure: 1. Make sure that the ON/OFF power s witch is in the OFF position, as shown in Fig ure 6. Figure 6. ON/OFF Power Switch in O FF Position 2. Position the power cord retaining c lip in the u p position, as shown in Figure 7.
An important point after buying a device Allied Telesis AT-PWR14 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Allied Telesis AT-PWR14 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Allied Telesis AT-PWR14 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Allied Telesis AT-PWR14 you will learn all the available features of the product, as well as information on its operation. The information that you get Allied Telesis AT-PWR14 will certainly help you make a decision on the purchase.
If you already are a holder of Allied Telesis AT-PWR14, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Allied Telesis AT-PWR14.
However, one of the most important roles played by the user manual is to help in solving problems with Allied Telesis AT-PWR14. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Allied Telesis AT-PWR14 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
