Instruction/ maintenance manual of the product TSC 100 Extron electronics
Go to page of 17
Extron Electronics, USA 1230 South Lewis Street Anaheim, CA 92805 USA 714.491.1500 Fax 714.491.1517 Extron Electronics, Europe Beeldschermweg 6C 3821 AH Amersfoort The Netherlands +31.33.453.4040 Fax +31.33.453.4050 Extron Electronics, Asia 135 Joo Seng Road, #04-01 PM Industrial Building Singapore 368363 +65.
Precautions This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product's enclosure that may present a risk of electric shock.
TSC 100 • Quick Start Guide QS-1 To install and set up the TSC 100, follow these steps: Step 1 T urn all of the equipment of f and disconnect it from the power source. Step 2 Rack mount the TSC 100 , or place it on a desktop. See “Rack Mounting the TSC 100” in chapter 2, Installation and Operation .
TSC 100 • Quick Start Guide Quick Start Guide — TSC 100, cont’d i TSC 100 • Table of Contents Chapter 1 • Introduction .......................................................... 1-1 About the TSC 100 .........................................
ii TSC 100 • Table of Contents T able of Contents, cont’d TSC 100 1 Chapter One Introduction About the TSC 100 Features.
TSC 100 • Introduction Introduction TSC 100 2 Chapter T wo Installation and Operation Rack Mounting the TSC 100 Connections Operation Troubleshooting About the TSC 100 The Extron TSC 100 is a transcoder and standar ds converter that allows worldwide compatibility with video standards such as NTSC 3.
TSC 100 • Installation and Operation TSC 100 • Installation and Operation Installation and Operation 2-3 Connections All connections, including power , input and output, and control, are on the r ear panel of the TSC 100.
TSC 100 • Installation and Operation TSC 100 • Installation and Operation Installation and Operation, cont’d 2-5 2-4 Softwar e for RS-232 or RS-422 control is included with the TSC 100. See chapter 3, Serial Control for details. 6 Buffered loopout composite BNC connector — Connect one BNC female connector for buffered composite loopout.
TSC 100 • Installation and Operation TSC 100 • Installation and Operation Installation and Operation, cont’d 2-6 8 Min / Max indicator LED — A red LED lights to indicate when the minimum or maximum adjustment levels are reached.
TSC 100 • Installation and Operation Installation and Operation, cont’d TSC 100 3 Chapter Thr ee Serial Contro l Programmer’s Guide for Serial Communication Control Software for Windows ® 2-8.
TSC 100 • Serial Control TSC 100 • Serial Control Serial Control, cont’d Programmer’ s Guide for Serial Communication The TSC 100 can be contr olled by a host computer or other control device .
TSC 100 • Serial Control TSC 100 • Serial Control Serial Control, cont’d Symbol definitions = CR/LF (carriage return/line feed) • = Space X1 = Input number (1 = composite, 2 = S-video) X2 = Adjustment range (0-255) X3 = Adjustment range (0-100) X4 = 0 = on, 1 = off X5 = V ideo input Standard — 0 = None, 1 = NTSC, 2 = P AL, 3 = NTSC 4.
TSC 100 • Serial Control TSC 100 • Serial Control Serial Control, cont’d 3-7 3-6 Command/response table for SIS commands (cont’d) Command ASCII Command Response Additional description (host to TSC 100) ( TSC 100 to host) Contrast (continued) Increment contrast value + ^ Con X7 Select the next higher contrast value.
TSC 100 • Serial Control TSC 100 • Serial Control Serial Control, cont’d 3-9 3-8 Figure 7 — Aspect Ratio Presets Control Software for Windows The included graphical control software for W indows offers another way to control the TSC 100 via RS-232/422 in addition to the Simple Instruction Set commands listed on the previous pages.
TSC 100 • Serial Control Serial Control, cont’d TSC 100 A Appendix A Specifications, Part Numbers, and Accessories Specifications Parts 3-10 2 . Click on the comm port that is connected to the interface’s RS-232 port. The control software will “look for” the interface at that port and read its configuration.
TSC 100 • Specifications, Part Numbers, and Accessories TSC 100 • Specifications, Part Numbers, and Accessories Specifications, Part Numbers, and Accessories A-3 DC offset ....................................... ±5 mV maximum Sync Standards Sync input .
TSC 100 • Specifications, Part Numbers, and Accessories Specifications, Part Numbers, Accessories, cont’d A-4 Parts Included Parts These items are included in each order for a TSC 100: Included pa.
An important point after buying a device Extron electronics TSC 100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronics TSC 100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronics TSC 100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronics TSC 100 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronics TSC 100 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronics TSC 100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronics TSC 100.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronics TSC 100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronics TSC 100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
