Instruction/ maintenance manual of the product USFM 100 Extron electronic
Go to page of 8
1 USFM 100 • Installation Guide IMPOR T ANT SAFETY INSTRUCTIONS Read all instructions before starting installation. When using this accessory , basic precautions should always be followed, including the following : WARNING: Risk of Personal Injury .
2 Hardwar e Included in the Kit Parts Qty Application ¼ - 20 x 2 inch, pan head bolts, 4 Base plate to wall installation ¼ inch T oggle assembly 4 Base plate to wall installation ¼ inch metal washe.
3 Le ve l Cutout fo r Signal Ca bl e Access Ma rk er fo r Pilot Hole USFM 100 Base Plate Mounting Holes Signal Ca bl es Exiting from Cutout Figure 2. W all Mounting Features c. If the cables are to be run behind the wall to the USFM 100 location, mark the cutout area on the wall large enough for signal cables (see figure 2 ).
4 NOTE: Mount the switcher with the rear panel uppermost for ease of cable connection (see figure 4 ). (1) 6-32 x 1/4" Screw (2) 4-40 x 1/4" Screws Mounting Plate P oleV ault ™ Switcher S.
5 Signal Cable Access Cutout Option 2400 V700 Race wa y Option Conduit Option Figure 5. Cabling Run Options If running cable behind the walls: Run all the cables from all the locations to the USFM 100 and through the access hole (cut in step 1d ) . Proceed to step 4.
6 5. Attach the Boom Arm, Power Supply , and Projector a. Hook the boom arm over the top rail on the base plate so that the tab on the arm (see figure 6 , inset) is against the rail. Secure the arm at the bottom with the two supplied (10-32 x 3/8 inch) pan head screws and washers, and at the top with the single ¼-28 x ¾ inch screw .
7 34.40" (87.38 cm) 2.20" (5.59 cm) 31.80" (80.77 cm) 3.60" (9.14 cm) 3.85" (9.77 cm) 11.82" (30.02 cm) 1.25" (3.18 cm) Base Plate (front view) Boom Arm (side view) Boom Arm (top view) 21.65" (54.99 cm) 12.50" (min.
8 USFM 100 Installation Guide, cont'd 68-1838-01 Rev C 08 12 31.80" (max) (80.77 cm) 30.00" (max) (76.20 cm) 3.71" (9.42 cm) 3.22” - 5.22" (8.18 - 13.26 cm) 4.42” - 6.42" (11.23 - 16.31 cm) Center of UPB 0.0” - 2.0" (0 - 5.
An important point after buying a device Extron electronic USFM 100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic USFM 100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic USFM 100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic USFM 100 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic USFM 100 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic USFM 100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic USFM 100.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic USFM 100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic USFM 100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
