Instruction/ maintenance manual of the product TP Receivers Extron electronic
Go to page of 44
User ’s Manual HIgh Resolution Video, Composite Video, and Stereo Audio T wisted Pair Cable T ransmission Products TP Receivers Family C Do not connect this device to a computer data or telecommunications network 68-547-02 Rev .
Pr ecautions This symbol is intended to alert the user of important opera ting and mainten ance (se rvicing ) instru ctions i n the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may present a risk of electric shock.
i TP Receivers Precautions, cont’d 安全须知 • 中文 这个符号提示用户该设备用户手册中 有重要的操作和维护说明。 这个符号警告用户该设备机壳内有暴 露.
ii TP Receivers.
iii TP Receivers • T able of Contents T able of Contents Chapter One • Introduction .................................................. 1-1 About the TP Receivers ..................................................... 1-2 Features ..................
iv TP Receivers • T able of Contents T able of Contents, cont’d 68-547-02 Rev . J 01 09 All trademarks mentioned in this manual are the pr operties of their respective owners. Appendix • Specifications, Accessories, and Part Numbers ...........
TP Receivers 1 Chapter One Intr oduction About the TP Receivers Features.
TP Receivers • Introduction Introduction, cont’d 1-2 Intr oduction About the TP Receivers The TP R BNC A, TP R BNC A V and TP R 15HD ar e Extron T wisted Pair (TP) receivers that receive transmiss.
TP Receivers • Introduction 1-3 The TP r eceivers only receive signals transmitted by Extr on TP transmitters. This user manual documents installation, features, and operation of the TP receivers only .
TP Receivers • Introduction Introduction, cont’d 1-4 TP R BNC A V receiver The TP R BNC A V receiver has the following features: V ideo output — Provides RGBHV , RGBS, or RGsB video on 5 BNC connectors, and composite video on 1 BNC connector . RJ-45 connector — Allows attachment to an Extron TP transmitter .
TP Receivers • Introduction 1-5 TP R 15HD A receiver The TP R 15HD A receiver has the following featur es: V ideo output — Provides RGBHV , RGBS, and RGsB on a 15-pin HD connector . W ith an optional SY 15 HD-RGBHV cable, the receiver can output component video, S-video, or composite video.
TP Receivers • Introduction Introduction, cont’d 1-6 This page intentionally left blank..
TP Receivers 2 Chapter T wo Installation and Operation Installation Overview Front Panel Controls and Indicators T roubleshooting.
TP Receivers • Installation and Operation Installation and Operation, cont’d 2-2 Installation Overview T o install and set up a TP receiver and the associated TP transmitter(s) for operation, perf.
TP Receivers • Installation and Operation 2-3 N The following transmitters are compatible with the TP R 15HD A, TP R BNC A and TP R BNC A V receivers: TP T 1 5HD 4 5 , T P T A 4 5, TP T 15 HD A, TP T 1 5HD A V , TP T 468 N All TP transmitters include a 15V or 12V external power supply .
TP Receivers • Installation and Operation Installation and Operation, cont’d 2-4 Video jumpers The TP R BNC A and TP R BNC A V receivers can be congured to receive component video, S-video, or composite video. N The receivers ar e factory configured for RGB video.
TP Receivers • Installation and Operation 2-5 5 . Locate J3 on the RGB video printed cir cuit board. See gure 2-1. a . For RGB video , ensure that pin 2 is jumper ed to pin 3. b . For any other video format , ensure that pin 1 is jumpered to pin 2.
TP Receivers • Installation and Operation Installation and Operation, cont’d 2-6 1 . Remove thr ee screws on each side and one or two scr ews on top of the cover (gure 2-2). RGB OUTPUT RGB INPUT A-V INPUT A-V OUTPUT AUDIO R VIDEO G B H/HV V A AUDIO L R B A L R B ISOG C SYNC 50/60 Hz 100-240V 1.
TP Receivers • Installation and Operation 2-7 Mounting the receiver UL guidelines for rack mounting The following Underwriters Laboratories (UL) guidelines are relevant to the safe installation of the TP Receivers in a rack: 1.
TP Receivers • Installation and Operation Installation and Operation, cont’d 2-8 Rack mounting (TP R BNC A, TP R BNC A V , TP R 15HD A) TP R BNC A, TP R BNC A V , or TP R 15HD A V — For optional rack mounting, mount the receiver on a 9.5" deep 1U Universal Rack Shelf (Extron part # 60-190-01 ) (gur e 2-3).
TP Receivers • Installation and Operation 2-9 TP R 15HD A only — For optional rack mounting, mount the receiver on a V ersaT ools 3.5" deep 1U Rack Shelf (Extron part # 60-190-20) (gure 2-4). The TP R 15HD A mounts in one of four locations on the rack.
TP Receivers • Installation and Operation Installation and Operation, cont’d 2-10 All models except the TP R 15HD A can be mounted through a table or podium using an Extron Thr ough-Desk Mounting Kit for 1 /4 or 1 /2 Rack W idth Products (part # 70-077-02 ).
TP Receivers • Installation and Operation 2-11 7 . For under-surface mounting , align the mounting scr ews with the slots in the brackets and place the receiver against the surface, with the screws thr ough the bracket slots.
TP Receivers • Installation and Operation Installation and Operation, cont’d 2-12 Rear panel features and cabling TP R BNC A TP R BNC AV RGB INPUT A-V INPUT 50/60 Hz 100-240V 0.3A RGB OUTPUT R VIDEO GB H/HV V A AUDIO AUDIO L R B SOG C SYNC LR A A-V AUDIO L R B LR RGB INPUT RGB OUTPUT RG B H/HV V A AUDIO L R B SOG C SYNC POWER 15V .
TP Receivers • Installation and Operation 2-13 Output cabling Computer video The TP R BNC A, TP R BNC A V and TP R 15HD A receive and output RGB video. These receivers can also r eceive component video, S-video, or composite video and output them on the R, G, and B signal lines.
TP Receivers • Installation and Operation Installation and Operation, cont’d 2-14 d RGB Output 15HD (TP R 15HD A) — Connect the desired video output device to the rear panel output 15HD connector . Refer to the table below for the video signal connections.
TP Receivers • Installation and Operation 2-15 Audio All Extron TP receivers r eceive and output stereo audio. All receivers except the TP R 15HD A output the audio on both left and right RCA connectors and on 3.5 mm, 5-pole captive screw connectors.
TP Receivers • Installation and Operation Installation and Operation, cont’d 2-16 TP R BNC A — W ire the external 15 V power supply into this 3-pole captive screw connector (gur e 2-9) and plug the connector into the receiver . The power supply is included with the unit.
TP Receivers • Installation and Operation 2-17 N Enhanced Skew‑free A/V cable is not r ecommended for Ethernet/LAN applications. This cable is specially designed for compatibility with Extron’ s T wisted Pair products, wired using the TIA/EIA 568 A standard.
TP Receivers • Installation and Operation Installation and Operation, cont’d 2-18 Skew exists between pairs when the physical length of one wire pair is dif ferent fr om another . As the transmission cable length increases, the amount of skew incr eases.
TP Receivers • Installation and Operation 2-19 Front Panel Contr ols and Indicators The TP R BNC A and TP R BNC A V have similar controls and indicators (gure 2-12).
TP Receivers • Installation and Operation Installation and Operation, cont’d 2-20 • The transmitter is receiving power from the receiver , a local monitor is connected to the transmitter , and the receiver output is connected to a device that provides a r eference gr ound.
TP Receivers • Installation and Operation 2-21 N The TP T 15HD 45 and TP T A 45 do not have the DDSP feature. 7. The transmission distance may be too far for remote power . T ry connecting a local 15 V power supply to the transmitter . 8. The transmission distance may be too short.
TP Receivers • Installation and Operation Installation and Operation, cont’d 2-22 If the receiver Manual/Auto LED flashes 1 . The transmission distance may be too far for r emote power . Connect a local 15 V power supply to the transmitter . 2 . Check the RJ-45 connector for a loose connection.
TP Receivers A Appendix Specifications, Accessories, and Part Numbers Specifications Included Parts Accessories Cables/Adapters.
TP Receivers • Specications, Accessories, and Part Numbers Specifications, Accessories, and Part Numbers cont’d A-2 Specifications, Accessories, and Part Numbers Specifications Video Number/signal type .................... 1 or 2 sets of proprietary analog signals Connectors .
TP Receivers • Specications, Accessories, and Part Numbers A-3 Audio Number/signal type ..................... 1 or 2 sets of analog proprietary signals Connectors ..................................... 1 or 2 shielded RJ-45 female Frequency r esponse .
TP Receivers • Specications, Accessories, and Part Numbers Specifications, Accessories, and Part Numbers cont’d A-4 T emperature/humidity ................ Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, noncondensing Operating +32° to +122°F (0° to +50°C) / 10% to 90%, noncondensing Cooling .
TP Receivers • Specications, Accessories, and Part Numbers A-5 Product weight TP R BNC A ........................ 1.6 lbs (0.7 kg) TP R BNC A V ..................... 2.6 lbs (1.2 kg) TP R 15HD A ...................... 0.4 lbs (0.2 kg) Shipping weight TP R BNC A .
TP Receivers • Specications, Accessories, and Part Numbers Specifications, Accessories, and Part Numbers cont’d A-6 Included Parts These items are included in each or der for a specic TP r eceiver: Included parts Part number All TP Receiver User's Manual Captive screw connector , 5 pole, 3.
TP Receivers • Specications, Accessories, and Part Numbers A-7 Cables/Adapters N Enhanced Skew‑Free A/V UTP cables ar e not recommended for Ethernet/LAN applications.
TP Receivers • Specications, Accessories, and Part Numbers Specifications, Accessories, and Part Numbers cont’d A-8 Video cables and adapters Part number MHR-5 BNC/3 (3 feet/0.9 meters) 26-260-15 MHR-5 BNC/6 (6 feet/1.8 meters) 26-260-01 MHR-5 BNC/12 (12 feet/3.
Extron’ s W arranty Extron Electr onics warrants this product against defects in materials and workmanship for a period of three years fr om the date of purchase.
Ex tron US A - We st Headquar te rs + 80 0.6 33 .9 87 6 I nside US A / Ca nada On ly +1 .7 1 4.4 91 .1 50 0 +1 .7 1 4.4 91 .1 51 7 FA X Ex tron US A - East + 800 .6 33 .9 87 6 I nside US A / Ca nada On ly +1 .9 19 .8 63 .1 79 4 +1 .9 19 .8 63 .1 79 7 FA X Ex tron Europe +8 00 .
An important point after buying a device Extron electronic TP Receivers (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic TP Receivers yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic TP Receivers - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic TP Receivers you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic TP Receivers will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic TP Receivers, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic TP Receivers.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic TP Receivers. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic TP Receivers along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
