Instruction/ maintenance manual of the product PS 123 Extron electronic
Go to page of 15
© 2007 Extron Electronics. All rights reserved. Extron Electronics, USA 1230 South Lewis Street Anaheim, CA 92805 800.633.9876 714.491.1500 FAX 714.491.1517 Extron Electronics, Europe Beeldschermweg 6C 3821 AH Amersfoort, The Netherlands +800.3987.6673 +31.
Pr ecautions This symbol is intended to alert the user of important opera ting and maint enance (serv icing) inst ructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may present a risk of electric shock.
FCC Class A Notice Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide r easonable protection against harmful interference when the equipment is operated in a commercial envir onment.
i PS 123 12 VDC, 3 Amp Power Supply • T able of Contents i T able of Contents Introduction .................................................................................... 1 Front and Rear Panel Featur es ........................................
ii PS 123 12 VDC, 3 Amp Power Supply • T able of Contents T able of Contents, cont’d PS 123 12 VDC, 3 Amp Power Supply • User's Guide 1 Introduction The Extron PS 123 is a high performance, plenum rated, DC power supply that accepts a 100 V AC to 240 V AC input and outputs 12 VDC, 3 amp maximum for the total current of the eight outputs.
PS 123 12 VDC, 3 Amp Power Supply • User's Guide PS 123, cont’d 2 PS 123 12 VDC, 3 Amp Power Supply • User's Guide 3 LED indicators See the illustrations on page 1.
PS 123 12 VDC, 3 Amp Power Supply • User's Guide PS 123, cont’d 4 PS 123 12 VDC, 3 Amp Power Supply • User's Guide 5 W Installation and service must be performed by a qualified electrician only . C A UL listed electrical distribution box is recommended for the termination of the conduit opposite the PS 123 power supply .
PS 123 12 VDC, 3 Amp Power Supply • User's Guide PS 123, cont’d 6 PS 123 12 VDC, 3 Amp Power Supply • User's Guide 7 7 . From the r ear panel end, pull the EMT plate (see figure 3) out of the enclosure. 8 . Thread the 18-gauge power wir es through the length of the electrical conduit tube.
PS 123 12 VDC, 3 Amp Power Supply • User's Guide PS 123, cont’d 8 PS 123 12 VDC, 3 Amp Power Supply • User's Guide 9 C Stripping the wires to expose less than the recommended amount may cause them to slide out of the connector too easily , even if they are tightly pinched by the captive screws.
PS 123 12 VDC, 3 Amp Power Supply • User's Guide PS 123, cont’d 10 PS 123 12 VDC, 3 Amp Power Supply • User's Guide 11 2 . Mount the PS 123 on the rack shelf, using two 4-40 x 3/16" screws in opposite (diagonal) corners.
PS 123 12 VDC, 3 Amp Power Supply • User's Guide PS 123, cont’d 12 PS 123 12 VDC, 3 Amp Power Supply • User's Guide 13 5 . Assemble the U-bolt and the following parts in the following order (figur e 1 1, below): a . Pass the legs of the U-bolt through the slotted holes on the mount plate flange.
PS 123 12 VDC, 3 Amp Power Supply • User's Guide PS 123, cont’d 14 PS 123 12 VDC, 3 Amp Power Supply • User's Guide 15 4 . Ensure that the cables exit the end of the pipe and not the cable access hole. 5 . Remove any rubber feet fr om the bottom of the device(s) to be mounted.
PS 123 12 VDC, 3 Amp Power Supply • User's Guide PS 123, cont’d 16 PS 123 12 VDC, 3 Amp Power Supply • User's Guide 17 Included Parts These items are included in each or der for a PS 123 power supply: Included parts Part number PS 123 Power Supply 60-814-01 (8) Female, 3.
PS 123 12 VDC, 3 Amp Power Supply • User's Guide PS 123, cont’d 18 PS 123 12 VDC, 3 Amp Power Supply • User's Guide 19 This page was intentionally left blank.
PS 123 12 VDC, 3 Amp Power Supply • User's Guide PS 123, cont’d 20 This page was intentionally left blank..
An important point after buying a device Extron electronic PS 123 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic PS 123 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic PS 123 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic PS 123 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic PS 123 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic PS 123, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic PS 123.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic PS 123. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic PS 123 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
