Instruction/ maintenance manual of the product EQ610 EverFocus
Go to page of 26
1/3” Color Day/Night plus Wide Dynamic Range Box Style Camera Operation Instructions Model No. EQ610 Please read this manual first for correct installation and operation. This manual sh ould be retained for future reference. The information in this manual was current when published.
- 1 - T ABLE OF CONTENTS 1. PRODUCT OVER VIEW ............................................................................................................... 3 1.1 Main Features .........................................................................
- 2 - 5.6 DA Y NIGHT ................................................................................................................................................. 19 5.7 3DNR ........................................................................
- 3 - 1. PRODUCT OVERVIEW Amazing color low light sensitivity of .05 lux before the added benefits of digi tal signal processing technology , delivered by a 1/3” Sony Super HAD II sens or , is just the beginning with the new EverFocus EQ610.
- 4 - 1.3 Specifications Pickup D evice 1/3" SONY Super HAD II CCD Video Format NTSC or PAL Scanning System NTSC: 525 TV lines, 60 fields/sec; PAL: 625 TV lines, 50 fields/sec. Picture Elements 768 x 494(NTSC); 752 x 582(PAL) Horizontal Resolution 560 TVL Sensitivity 0.
- 5 - 2. NAMES AND FUNCTIONS OF PARTS 2.1 Front panel The light sensor is for optional control of D/N switching levels in some applications. See section 5.
- 6 - ○ 2 ○ 3 ○ 5 ○ 6 ○ 7 ○ 8 ○ 9 ○ 10 ○ 11 ○ 4 ○ 11 ○ 9 ○ 2 ○ 3 ○ 5 ○ 6 ○ 7 ○ 4 ○ 12 ○ 10 ○ 8 ○ 2 ○ 3 ○ 5 ○ 6 ○ 7 ○ 8 ○ 9 ○ 10 ○ 11 ○ 4 ○ 10 ○ 10 2.
- 7 - GND D/N Out D/N In Motion RS485- RS485+ ○ 1 T erminal Block T erminal block connections: Connect wires to the terminal block by: strip the in sulation back ½” from the end of the wire; pres.
- 8 - ○ 2 Menu button for cursor left movement ○ 3 Menu button for cursor up movement ○ 4 Button to access on-screen setting menu and for SET command ○ 5 Menu button for cursor right movement .
- 9 - 3. INSTALLATION 1. Unscrew/remove the cover cap from the lens mount. 2. If C mount lens is used, please add the C adaptor mount ring (the 5mm thick ring in the accessory pack) between the lens and the mount. Please note: Failure to use a spacer ring when attaching a C mount lens can damage the camera! 3.
- 10 - 4. RS-485 CONNECTION 1. Connect the cable from keyboard or DVR RS485 port to the camera’s RS485 port. 2. Connect the cable from video output BNC of the camera to a monitor or DVR input BNC. 3. The RS485 ID set in the OSD Menu on the camera has to be the same as CAM ID used by the keyboard or DVR to control this camera.
- 11 - 5. CAMERA SETUP OPERATIONS This camera utilizes an On Screen Display (OSD) user setup menu. 5.1 Setup Buttons T o set items on the user setup menu, use the following buttons on the back panel. ○ 1 Left Button: Use this button to select or adjust the parameters of the selected item.
- 12 - 5.2 Display/Close the user setup menu screen I. Press the SET button The menu screen will appear on the monitor . II. Using the cursor button Use the cursor buttons or to move the cursor up or down. Use the cursor buttons or to adjust the mode or parameter settings.
- 13 - EQ610 Menu T ree.
- 14 -.
- 15 -.
- 16 - 5.3 LENS 1. When the SETUP menu is displayed on the screen, please direct the arrow to point to “LENS” by using the UP and DOWN buttons. 2. Please select the type of the l ens used (Manual/DC type) by pressing the LEFT or RIGHT button. 3. Please select RETURN and press the SETUP button if you would like to return to the previous menu.
- 17 - 5.4.4 SENSE-UP SENSE-UP is used to keep a brilliant, vivid scr een image under low light level conditions by automatically compensating for changes in the level of light. 1. Please direct the arrow to point to “SEN SE-UP” by using the UP and DOWN buttons.
- 18 - HEIGHT : Set the height of an area for the BLC to be adjusted. T he value adjustable is 0~6. RETURN: Press “RET” to save all settings in the BLC menu and return to the previous menu. Press “END” to save all the menu settings and exit. 5.
- 19 - 5.4.8 Return Press “RET” to save all settings in the Ex posure menu and return to the previous menu. Press “END” to save all the menu settings and exit. 5.5 WHITE BALANCE CONTROL The screen color can be adjusted by using the WHITE BALANCE function.
- 20 - S-Level: Set the start level from 0~100. E-Level: Set the end level from 0~100. EXT : The picture can switch automatically to co lor in a normal environm ent and to B/W when the ambient illumination is low based on the illumination reaching a light sensor; or it may be directly controlled by a trigger voltage.
- 21 - 5.8.2 D-EFFECT 5.8.2.1 FREEZE (Note that pr actical applicat ion of this f eat ure requires direct acc ess to the camera menu in rea l time). -OFF: Select “OFF” to view moving pictures. -ON: Select “ON” to view still pictures. 5.8.2.2 MIRROR -OFF: Disable the effects.
- 22 - additionally color reversed, with red areas appeari ng cyan, greens appearing magenta and blues appearing yellow . 5.8.2.6 RETURN Return: Press “RET” to save all settings in D- EFFECT menu and return to the previous menu. Press “END” to save all the menu settings and exit.
- 23 - 5.8.5 PRIVACY This mode masks areas you do not want to display on the screen. -OFF: Disable the PRIV ACY function. -ON: AREA SELECT : Please s elect the area you woul d like to hide from the 8 areas in AREA SELECT mode AREA DISPLA Y : Select “ON” to use the area selected in the AREA SELECT .
- 24 - 5.9.4 RETURN Press “RET” to saves all settings in the AD JUST menu and returns to the previous menu. Press “END” to save all the menu settings and exit. 5.10 RESET 5.10.1 FACTORY RESET Reset to the default settings. 5.10.2 RETURN Press “RET” to return to the previous menu.
- 25 - EverFocus Electronics Corp. Headquarter s Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-26982380 Beijing office Room 609,Technology Trade Building.
An important point after buying a device EverFocus EQ610 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EverFocus EQ610 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EverFocus EQ610 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EverFocus EQ610 you will learn all the available features of the product, as well as information on its operation. The information that you get EverFocus EQ610 will certainly help you make a decision on the purchase.
If you already are a holder of EverFocus EQ610, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EverFocus EQ610.
However, one of the most important roles played by the user manual is to help in solving problems with EverFocus EQ610. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EverFocus EQ610 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
