Instruction/ maintenance manual of the product 20/20 Event electronics
Go to page of 7
Event Electronics, LLC P.O. Box 4189 Santa Barbara, CA 93140-4189 Voice: (805) 566-7777 Fax: (805) 566-7771 Web: www.event1.com E-mail: info@event1.com Your warranty will be in effect when you send in your warranty card Event, Event Electronics, 20/20, 2020 p and 20/20 bas are trademarks of Event Electronics, LLC.
20/20 p S PECIFICATIONS …………………………………………….… 8 20/20 bas S PECIFICATIONS …………………………………………….
20/20 bas S PECIFICATIONS LF Driver: HF Driver: Frequency Response: Crossover: Acoustical Crossover: LF Amplifier Power: HF Amplifier Power: Input Connector: Polarity: Input Impedance: Input Sensitivi.
gauge speaker wire to connect the positive (red) and negative (black) speaker terminals to the similarly marked terminals on your power amplifier. Watch for an accidental polarity reversal . . . it happens! The result will be loss of low frequency response and center image.
8 20/20 p P OWERED M ONITOR C ONNECTIONS AND O PERATION Please refer to Figure 3. 1 C HANNEL A The Channel A amplifier section powers the external passive 20/20 monitor through the A output connector. 2 C HANNEL B The Channel B amplifier section powers the internal 20/20 monitor.
F IGURE 3. T HE 20/20 p REAR PANEL 6 C ARE AND M AINTENANCE Your Event Direct Field Monitors will not require any special care or maintenance if properly used. The cabinet is finished with a durable vinyl laminate that can be cleaned with a soft damp cloth.
7 P OWER C ONNECTOR This connector accepts the detachable linecord. Use the linecord supplied with your monitors and make sure it is fully seated into the Power Inlet connector. For safety reasons, do not attempt to defeat the linecord’s ground connection.
An important point after buying a device Event electronics 20/20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Event electronics 20/20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Event electronics 20/20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Event electronics 20/20 you will learn all the available features of the product, as well as information on its operation. The information that you get Event electronics 20/20 will certainly help you make a decision on the purchase.
If you already are a holder of Event electronics 20/20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Event electronics 20/20.
However, one of the most important roles played by the user manual is to help in solving problems with Event electronics 20/20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Event electronics 20/20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
