Instruction/ maintenance manual of the product MA-1212 EV Rider
Go to page of 8
R MA-1212 MA-1206 60 watt 120 watt Professional Mixer/Amplifiers Instruction Manual and Users Guide MONITOR OUTPUT 0 0 10 10 0 0 10 10 0 0 10 10 0 0 10 10 0 0 10 10 0 0 10 10 INPUT2 INPUT6 INPUT3 INPU.
A 24V DC power source (i.e. a battery) has to be connected to the terminals (13) that are covered by a protective lid. T o reduce the risk of dropping voltage to a minimum and to eliminate the danger of damaging Switching the amplifier on or off is performed through the power switch (6).
Do not obstruct the ventilation grilles of the equipment. Avoid having the amplifier worked on overload for a long time. Fully tighten the screw terminals for speakers in order to ensure a safe contact. Do not force command parts (buttons, controls, etc.
W ARRANTY ST A TEMENT Electro-V oice products are guaranteed against malfunction due to defects in materials or workmanship for a specified period, as noted in the individual product-line statement(s) below , or in the individual product data sheet or owner's manual beginning with the data of original purchase.
15A 100V 70V 25V 4 COM - + MIC LINE 24V MIC LINE 24V MIC LINE 24V MIC LINE 24V MIC LINE 24V MIC LINE 24V MIC LINE 24V MIC LINE 24V MIC LINE 24V MIC LINE 24V INPUT8 INPUT7 INPUT6 INPUT9 INPUT10 INPUT5 INPUT1 INPUT4 INPUT3 INPUT2 DC POWER LINE 115V~ 60Hz T5 A Priority Tel.
14. Output terminals These 5 terminals allow connecting speakers. Connecting the speakers to 4 ohm output - + 4 ohm 100V 70V 25V 4 W COM DC24V 10A - + Connecting the speakers to 25V output 0 25V 0 25V.
15. "PRE OUT" terminal This terminal output the mixed audio signals of all sources that are connected to the amplifier Inputs and can be utilized to feed an external power amplifier , a signal processor (e.g.a equalizer) or any other external appliance.
1 8 ." I N P U T1~I N P U T1 0 " Inputs These ten balanced/unbalanced combination type jack (XLR and 6.3mm) input, Meant for the connection of-condenser type microphone that accept 24V phantom power , dynamic microphone (30-600ohms) or a high level sound source (e.
An important point after buying a device EV Rider MA-1212 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EV Rider MA-1212 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EV Rider MA-1212 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EV Rider MA-1212 you will learn all the available features of the product, as well as information on its operation. The information that you get EV Rider MA-1212 will certainly help you make a decision on the purchase.
If you already are a holder of EV Rider MA-1212, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EV Rider MA-1212.
However, one of the most important roles played by the user manual is to help in solving problems with EV Rider MA-1212. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EV Rider MA-1212 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
