Instruction/ maintenance manual of the product SH888 Ericsson
Go to page of 71
Ericsson SH888 GSM 900/1800 Dual Band Mobile Phone User’s Guide Contents The Menu System The Phone, Keypad & Display Congratulations! Index Click below!.
Contents General Information ......................................................... 2 Operators & Subscription, GSM 900/1800 Dual Band, SIM & PIN Preparing Your Phone for Use ......................................... 3 The SIM Card, The Battery Turning On the Phone .
The Menu System The Menu System Start here Ring type Edit melody Mail alert Keylock Key sound Light Min minder Call info Answering mode Greeting Phone no Language Data menus Line1 tag Master reset Nam.
The Phone, Keypad and Display Key Functions YES , used to: • make calls, answer incoming calls, put calls on hold and switch between calls. • confirm selections and in- puts. • enter a selected menu. ON/OFF and NO , used to: • turn the phone on or off.
Congratulations… …and thank you for choosing the SH 888, a mobile phone specially suited for the demanding user of com- munication tools. Retaining the slim, streamlined size that has become associated with the Ericsson family of phones, the SH 888 sets a new standard for others to follow.
General Information Operators & Subscription To be able to use your phone, you need to have a sub- scription to a network. This is obtained from the net- work operator. The services included in your subscription depend on your choice of operator and/or subscription.
Pr eparing Y our Phone for Use The SIM Card When you register as a subscriber with a network operator, you obtain a SIM card. SIM cards come in two sizes. One is the size of a credit card, and the other is considerably smaller (about the size of a regular stamp).
Close the holder. Lock the holder by pressing it down and sliding it in the di- rection of the arrow in the picture. The Battery Your mobile phone comes with a nickel metal hydride (NiMH) battery. The battery is not charged when you buy your phone, but there may be enough power to turn on the phone.
A green indicator on the charger lights up. If not, make sure you have put the plug into the charger correctly. (You may have to press hard.) Connect the clear plastic plug on the charger cable to the charger. It is correctly inserted when it snaps into place.
• an alarm signal (a long beep) sounds and the mes- sage ‘Battery low’ appears for ten seconds in the display. • the indicator light on top of the phone starts blink- ing red.
T urning On the Phone To turn on the phone: Press and hold down the NO ( ON/OFF ) key until you hear a click. The display prompts you to enter your PIN. Enter your PIN. The digits appear as stars in the display. If you make a mistake while entering your PIN, erase the wrong digit by pressing the CLR key.
Press CLR to return to standby mode. Note! If by accident you end up with your phone displaying a language you do not understand, you can return to Eng- lish by pressing LEFT 0000 RIGHT at any time. Setting the Time The time is shown at the bottom of the display.
Making and Receiving Calls The instructions in this chapter assume that you have turned on your phone and that you are within range of a network. Emergency Calls To make an emergency call: If the phone is not on, turn it on by pressing the NO key until you hear a click.
Receiving a Call When you receive a call, the phone rings and the indica- tor light on top of the phone blinks green rapidly. The display shows ‘Answer?’. If your subscription includes the Calling Line Identifica- tion service and the caller’s network sends the number, you will see the caller’s number at the bottom of the display.
Calling Someone Who Has Called Y ou If you subscribe to the Calling Line Identification service, and the caller’s network sends the number, the numbers of the last ten answered calls are stored in the phone. To recall one of the last ten answered numbers: Press the navigation key to the LEFT .
Hiding or Showing Y our Number With most common subscriptions, the caller’s number is sent when a call is made. This means that the receiver can see your phone number when you make a call. However, some operators offer subscriptions where your phone number is normally hidden.
During a Call Your SH 888 has several functions which you might find helpful while you are on the phone. T o Change the Earpiece V olume If you want to change the earpiece volume during a call: Press the volume keys on the side of the phone up or down.
The Menu System The menu system of your SH 888 allows you to control the phone’s functions and to customize it to suit your personal preferences. Each menu contains a list of options; some of these have submenus with additional options. To help you find your way around the menus, we recommend that you use the fold-out on the inside of the cover.
The Phone Book The Phone Book in your SH 888 lets you store and recall phone numbers. This means that the phone can store all your important numbers. You do not have to re- member them or carry your address book around.
Entering Characters In the phone book you can accompany any number you store with a name. To enter the characters in the name, follow the instructions below. Press the appropriate key, 1–9, 0 or #, repeatedly until the desired character appears in the display.
Tip! If you enter a number in the scratch pad during a call, you can store it in the Phone Book by selecting ‘Store’ from the ‘Phone book’ menu while you have the number in the display.
Enter the name you want to recall (or the first letters of it) using the numeric keys as described above. You do not have to enter the entire name; the first few letters will do. The phone matches the letters with existing names in its memory. Press YES .
The ‘Special functions’ menu now appears. Press YES to enter the ‘Special functions’ menu. Press the navigation key until ‘Send Id’ appears. Press YES to make the call. Keeping Y our Phone Book Up to Date As the people you know change jobs, move, marry etc.
Copying Phone Numbers between Positions and Memories As you fill up the Phone Book memories, you might want to move entries from one memory to another or between positions in the memories. T o Copy All Numbers from Card Memory to Phone Memory From the ‘Phone book’ menu, select ‘Copy all’.
Sending and Receiving T ext Messages A very convenient feature of your Ericsson SH 888 is the Short Message Service (SMS). This allows you to send and receive text messages consisting of up to 160 characters. Using the Short Message Service, you do not have to worry about whether the people you want to reach check their answering machines or not.
Setting the Phone for T ext Messaging If the phone number to your network service centre cannot be retrieved from your SIM card, you must specify the number yourself. Otherwise you cannot reply to received messages or send your own messages. From the ‘Mail’ menu, select ‘Send message’.
For example: • To enter an A, press 2 once. • To enter a B, press 2 twice. Tip! To enter a digit, you can press and hold down the numeric key. To enter the second letter on the numeric keys directly, press and hold the upper volume key and press the desired numeric key.
• Scroll through the message using the navigation key. RIGHT takes you forwards and LEFT takes you backwards through the message. • To move three lines forwards, press 3. To move three lines backwards, press 1. • To return to the beginning of the message, press and hold LEFT .
Reading Stored Messages From the ‘Mail’ menu, select ‘Read messages’. Scroll with the navigation key until you find the message you are looking for. • ‘New’ stands for a new unread message. • ‘Old’ stands for a read message.
Communicating via the Modem A very convenient feature of the SH 888 is the in-built modem (which equals a PC Card modem). With this, you can connect a computer to your phone in order to send and receive fax and e-mail messages, browse the Inter- net and much, much more.
Installing the Infrared Modem Before you start Make sure that the phone’s IR port is activated. To activate the IR port: In the menu system, scroll to ‘Activate IR port’ and press YES . (If the IR port is already acti- vated, the display will read ‘Deactivate IR port’ instead.
Step 1 – Check Infrared Support Before installing the infrared modem you also need to check if the Microsoft Infrared support for Windows version 2.0 has been installed. To do this, and also to check the version of the existing infrared support on your computer, do the following: Under Settings in the Start menu, select Control Panel.
Step 4 – Install Infrared Modem Insert the CD into your computer’s CD drive or insert the diskette into the diskette drive. Place the phone with the infrared modem next to your PC. See illustration below. (The infrared port may be positioned differently on your com- puter.
T o Connect Using the IR Link The IR feature of the SH 888 allows you to connect to a computer without using a cable. This option requires that your computer has an IR port, and that the operat- ing system supports the IrDA standard for infrared communication (see above).
Speech then Fax Calls In some cases, you might want to speak to the receiving part before starting the fax transmission. This call type is referred to as a speech then fax call. Note! This feature must be supported by your network opera- tor and you may need a separate subscription.
• If you select ‘Speech/FAX’, the next call will be handled as a speech then fax call. • If you select ‘FAX/Speech’, the next call will be handled as a fax then speech call. • If you select ‘FAX’, the next call will be handled as a fax call.
The Mobile Of fice Suite The Mobile Office Suite is a Phone Book Manager and a Message Manager. Once installed on your computer, the application allows you to organize the names and telephone numbers that you store in your phone book. It also allows you to write and read SMS messages on your computer.
Uninstalling the Mobile Office Suite Under ‘Settings’ in the ‘Start’ menu, select ‘Control Panel’. Click ‘Add/Remove Programs’. Select ‘Ericsson Mobile Office Suite’ from the list of applications. Click ‘Add/Remove’.
Networks When you turn on the phone, it normally selects its home network. If this is not within range, for example when you are abroad, you may use another network, provided your home network has an agreement that allows you to do so. This is called roaming .
the name of the network is displayed with the message ‘Current’. • If you are using another network and your home network is available, the name of the home net- work is displayed with the message ‘Home’. • Instead of the full name of a country and a net- work, an abbreviation is displayed when you use the ‘Networks’ menu.
Press YES and scroll with the navigation key until you find the desired network. If the desired network does not appear, press YES when the question ‘Other?’ appears. Then enter the three-digit country number and the two-digit network number. Finally, to add the network to the list, press YES .
Security The Card Lock Your SIM card is protected by a card lock. When you buy your SIM card, you obtain a PIN (Personal Identity Number). Every time you turn the phone on, you have to enter your PIN and then press YES , unless you turn this feature off (see below).
Enter a new four- to eight-digit PIN (or PIN2). Press YES . Re-enter the new PIN (or PIN2) to confirm it. Press YES . Warning! If you enter the wrong PUK ten times in succession, your card will be permanently blocked. If this happens, you will have to contact your network operator.
You now have three options: • ‘Activate’, which sets a call bar, • ‘Get status’, which lets you check the status of a call bar, • ‘Cancel’, which cancels the call bar. Confirm your selection by pressing YES . Enter your password and press YES .
Fixed Dialling Fixed Dialling is a way of restricting outgoing calls. It requires a SIM card that allows fixed numbers to be stored. The fixed numbers are protected by the PIN2. • The Fixed Dialling function allows calls to be made only to fixed numbers stored on the SIM card.
Diverting Incoming Calls If you want to make certain that your incoming calls are taken care of when you are unable to answer them, you can use the Call Divert service to divert them to another phone number. The Call Divert service lets you: • divert calls if you are already on the phone.
Checking the Divert Status T o Check the Status of a Certain Call Divert From the ‘Divert’ menu, scroll to the call divert you want, using the navigation key, and press YES . Scroll to the ‘Get status’ option. To check the status, press YES .
Handling Mor e than One Call Your Ericsson SH 888 allows you to handle more than one call simultaneously. This means that you can put a call that is in progress on hold, while you make or answer a second call, and then switch between the two calls. See also ‘Conference Calls’ at the end of this chapter’.
T o End the Current Call To end the current call, press NO . The message ‘Retrieve held call?’ appears and a beep sounds. Press NO to end the held call, or press YES to return to the held call. Note! If you do not press YES or NO within three seconds, the message ‘Retrieve held call?’ disappears from the display.
T o initiate a Conference Call Call the first person you wish to include in the conference call. Put this person on hold by pressing YES . Call the second person you wish to include in the conference call. Press 3, followed by YES, to include the two persons in the conference.
Handsfr ee Calling By using the Ericsson portable or vehicle handsfree solutions, you can be on the phone without having to use your hands to hold it. The SH 888 allows you to change the default settings for the handsfree-related functions so that they fit your own requirements.
Personalizing Y our Phone The Ericsson SH 888 is much more than just another mobile phone. It is your companion in both pro- fessional and private life. As such, you most certainly want to adjust the phone to your preferences. You can do so by composing your own ring signal, changing the key sound or changing the message signal, among other things.
Write your new greeting, using the numeric keys. For information on how to enter letters, see chapter ‘ The Phone Book’. To confirm your new greeting, press YES .
Composing Y our Own Ring Signal From the ‘Settings’ menu, select ‘Edit Melody’. Clear the display by pressing CLR . Use the keypad to enter notes. The key- pad now works as a keyboard. Press and hold a key to enter a long note. Press 0 to increase the note one octave.
To set the date format: From the ‘Clock’ menu, select ‘Date mode’. Scroll to the date format you want, using the navigation key. To select a date format, press YES. To set the date: From the ‘Clock’ menu, select ‘Set date’.
Other Useful Featur es Today’s networks are full of advanced features that can help you in your daily life. You will access and benefit from all of them, easily and conveniently, with your Ericsson SH 888, which is designed and prepared to be the best tool available for that kind of services.
T o T urn Off the V oice Mail From the ‘Mail’ menu, select ‘Set VoiceM’. Select ‘Off’ and press YES . The Call Time/Call Cost When you are on the phone, the display shows the duration of a call.
Scroll to ‘Cost’, using the navigation key, and press YES . To exit to standby mode, press CLR. From the ‘Info’ menu, select ‘Price Units’ and press YES . ‘New Price’ appears. Press YES . Enter the code for the desired currency, for example GBP for Pound Sterling, and press YES .
Different Settings for Each Line You can have different settings for each line: for example, the tone of the ring signal, call diverts, call bars and call waiting function. The call meters in the ‘Info’ menu show the call times (call costs) for the line currently selected.
Enter your security code and press YES . The default code is 0000. To change security codes, see above. Select card position (Card 1 or Card 2), using the navigation key, and press YES . Enter the access number (the phone number) to the calling card server.
T o T urn Off Area Information From the ‘Mail’ menu, select ‘Area info’. Press YES . Scroll to ‘Off’, using the navigation key, and press YES . Area Information Message T ypes Each type of Area Information message is identified by a three-digit code.
Scroll from one message to another by using the navigation key. To select a message, press YES . The Alarm The phone has an alarm function. When it is activated, an icon in the shape of a bell ( B ) is shown next to the current time in the display.
Guidelines for Safe and Ef ficient Use General Your mobile phone is a radio transmitter and receiver. When the phone is turned on, it receives and transmits radio frequency (RF) energy. Depending on the type of mobile phone you have bought, it operates in different frequency ranges and employs commonly used modu- lation techniques.
If you are going to use your mobile phone while driv- ing: • Give full attention to driving. • Use hands-free operation, if available. • Pull off the road and park before making or an- swering a call if driving conditions so require. RF energy may affect some electronic systems in motor vehicles.
Potentially Explosive Atmospheres Turn off your phone when in any area with a poten- tially explosive atmosphere. It is rare, but your phone or its accessories could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bod- ily injury or even death.
W arranty Conditions If your Ericsson product requires warranty service you should return the product to the dealer/retailer from whom it was purchased. If your Ericsson product re- quires warranty service when you are abroad, the serv- ice is available in those countries listed on your Interna- tional Warranty Certificate.
– Accidents, acts of God or any cause beyond the control of Ericsson, including but not limited to lightning, water, fire, public disturbances and improper ventilation.
Index A Aircraft ............................6 0 Alarm .............................5 8 set the alarm 58 turn the alarm function off 58 turn the alarm off 58 Alternate line service (ALS) .............5 4 answered calls memory ...............1 1 Calling Line Identification service (CLI) 11 clear memory 11 recall number 11 Answering Mode .
Erasin ga Messag e ................... 2 4 Erasin ga Phon e Numbe r .............. 1 9 Exposur e t o Radi o Frequenc y Energ y ..... 5 9 F Fa x call s ........................... 3 0 Fixe d Diallin g ....................... 4 1 Activate 41 Cancel 41 Edi t Fixe d Numbers 41 Stor e Fixe d Numbers 41 Frequencie s .
Roaming International 2 S Scratch Pad .........................1 3 Security ...........................3 8 Call Barring 39 Card Lock 38 Keypad Lock 40 Phone Lock 39 security code (PIN) .
Second edition (April, 1998) This user’s guide is published by Ericsson Mobile Communica- tions AB , without any warranty. Improvements and changes to this user’s guide due to typographical errors.
An important point after buying a device Ericsson SH888 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ericsson SH888 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ericsson SH888 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ericsson SH888 you will learn all the available features of the product, as well as information on its operation. The information that you get Ericsson SH888 will certainly help you make a decision on the purchase.
If you already are a holder of Ericsson SH888, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ericsson SH888.
However, one of the most important roles played by the user manual is to help in solving problems with Ericsson SH888. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ericsson SH888 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
