Instruction/ maintenance manual of the product CFS-900P Epson
Go to page of 7
MIS Continuous Flow for Epson Photo 900 Installation Instructions What you will need to Install the Photo 900 CFS • Complete CFS-900P Kit • Scissors • Measuring Tape or Ruler • Marking Pen or .
Step 1 - Check Printer Condition If you have a brand new printer, follow the Epson instructions for setting up your printer. Use the Epson cartridges that came with the printer. Follow normal installation instructions for the software. Test the printer by printing pictures.
Bracket. Do not separate the Hook and Loop, Keep t hem together just like they were when delivered. Remove the adhesive backing from the Hook portion of the Velcro. Keep it attached to the Loop portion. Carefully install the Bridge Bracket in its proper loca tion at the left edge of the housing, as shown above.
Step 6 – Install Cartridges Use a flat blade screwdriver and remove the Epson cartridge hold down clamps, black and color. Insert the screwdriver blade at the hinge point and twist. T he clamps will come right off, without any damage. Keep these in a safe place, you may need them in the future.
Insert the tubing into the tube clip and close it until it snaps shut. Don’t pinc h any of the tubes. Next, separate the tubes, or un-web them, so that they are separated all the way back to the beige tube clip you just installed. Now you are ready for the ink bottles.
Velcro attaches bottles to printer (This is photo from a 2200 printer) Hold the tube against the outside of the ink bottle. Cut off the excess tube at a 45 degree angle. Insert the tube into the bottle. Make sure that you insert 3 ½ to 4 inches of tube length into the center hole in the bottle cap.
Step 9 – Testing the System Push the cartridges to the far right and reattach the printer power. Turn on the pow er on the front of the printer if needed. Have you computer and graphics program up an ready to go. The printer should come on and move back an forth a few times and do a cleaning cycle.
An important point after buying a device Epson CFS-900P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Epson CFS-900P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Epson CFS-900P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Epson CFS-900P you will learn all the available features of the product, as well as information on its operation. The information that you get Epson CFS-900P will certainly help you make a decision on the purchase.
If you already are a holder of Epson CFS-900P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Epson CFS-900P.
However, one of the most important roles played by the user manual is to help in solving problems with Epson CFS-900P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Epson CFS-900P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
