Instruction/ maintenance manual of the product 13-NCL 50-SNC13L 50-TNC13L England's Stove Works
Go to page of 23
INSTALLATION & OPERATION MANUAL Stoves manufactured 2004 and before MODEL NUMBERS: 13-NCC 50-SNC13C 50-TNC13C 13-NCL 50-SNC13L 50-TNC13L 13-NCP 50-SNC13P 50-TNC13P 13-NCG 50-SNC13G 50-TNC13G Thank you for purchasing this product from a fine line of heating equipment.
A letter from our Technical Support department : Thank you for purchasing this fine produ ct from England’s Stove Works! England's Stove Works was started, and is still owned by, a family that believes strongly in a "Do It Yourself" spirit – that’s one reason you found this product at your favorite “Do It Yourself” store.
CAUTION If you have any doubt concerning your ability to comp lete your installation in a professional-like manner after reading these instructions, you should obtai n t he services of an installer who is versed in all aspects as to the correct and safe installation.
OPERATION WHY THE CORRECT FLUE SIZE IS IMPORTANT: 6” “Draft” is the force that moves air from the appliance up through the chimney. The amount of draft in your chimney depends on the length of the chim ney, local geography, nearby obstructions, and other factors.
FLUE SYSTEM 1. Existing Flue System If you have chosen a freestanding unit, this stov e is designed to conn ect to an existing flue system, such as masonry or a pre-manufactured Class A flue syste m.
INSTALLATION AP PLICATIO NS Illustration 1 NOTE: 1 . Horizontal run not to exceed 6’. 2. Total flue length should not exceed 25’. 3. Floor protection required: Min. size 48” x 48”. 4. Always check local codes for clearances, installation, etc.
INSTALLATION AP PLIC ATIO NS, Con t’d . Illustration 1b.
Pre-Manufactured Flue System : In the past few years pre-manufactured flue systems have become very popular, because this type system is easily installed and, when done correctly, is very safe. There are many pre-manufactured flue systems on the market, and when making your choi ce it should be U.
Installation on a Combustible Floor If the appliance is to be installed on a combustible floor or a combustible floor covering, it must be installed on a 1” thick non-combustible millboard floor protector or a durable equivalent, with a “R” factor of no less than “2.
Side Heat Shield 3. Side Heat Shields This accessory item comes with the hardware (six (6) mounting screws) necessary to install it on the rear of the stove.
FREESTANDING PLACEMEN T AND INSTALLATION The first problem you may encounter is getting your stove into your home -- all of our stove products are well constructed, which makes them rather heavy. Three to four adults can norm ally handle a unit, but we still recommend using a handcart.
CHIMNEY OPERATION Do not use a grate or elevate the fire. Build the wood fire directly on the bricks. When the stove is used for the first time, solvents in the paint will smoke off as the stove “cures.” WOOD – This heater is designed to burn natural wood only.
FIRST FIRE – Remember to ventilate well. Allow the stove to cure before burning for long p eriods of time at high temperatures. Flat spots on the painte d surface are normal. Shiny spots on the painted surface ( before burning) are normal.
GLASS CARE REPLACE GLASS ONLY WITH HIGH-TEMPERATURE ROBAX PYROCERAM OF THE PROPER SIZE AND THICKNESS. The following use and safety tips should be observed: 1.
The following steps should be followed for replacement of the door gasket : 1. Ensure the appliance is not in operation and is thoroughly cooled. 2. Remove the old door gasket and clean the gasket channel. 3. Using an approved high-temperature gasket cement, apply a thin coat in the bottom of the channel.
Placement of Stainless Steel Burner Tu bes for all 13-NC, 50-SNC13 and 50-TNC13 (freestanding and insert) stove models..
CREOSOTE When wood is burned slowly, it produces tar and other organic vapors. These combine with moisture to form creosote. Creosote vapors condense in the relatively cool chimney flue of a slow-burning fire – as a result, creosote residue accumulates on t he lining of the flue.
IMPORTANT: HELPFU L HINTS AND TIPS WORTH REVIEWING 1. What is the correct way to start a fire? You will nee d small pieces of dry wood (kindling) and paper. Use only newspaper or paper that has not been coated or that has had materials glued or applied to it.
6. Why is there always a large quantity of thick black smoke in the firebox? A large quantity of thick black smoke in the firebox is a po ssible indication that you have poor draft.
PARTS, ACCESSORIES AND OPTIONS LIST (Options and trim (i.e. brass and nickel) interchange for variety. Gold door and legs may also be ordered to replace existing door and pedestal or regular cast legs.) REPLACEMENT PARTS AC-G17 DOOR GLASS KIT WITH GASKET (16 ½ “ x 9 ¼ “ x .
Air Inlet Control Illustration 6 EXPL O DED V IE W Illustration 7 DIRECTIONS FOR INSTALLATION OF LEGS OR PEDESTAL: (Stove must be cooled and all ashes cleaned ou t) * Remove bricks, disconnect f lue, and turn stove on its back. * If you are replacing existing legs or pedestal, disconne ct the existing legs or pedestal.
Have this information on hand if you phone the f actory or y our dealer regarding this product. Retain for your files: Model Number __________________________ Date of Purchase ________________________.
WARRANTY REGISTRATION fo r England’s Stove Works Purchased by (Name) _________ ________________________ _________________ Address ___________ __________________________________________ ________ City.
An important point after buying a device England's Stove Works 13-NCL 50-SNC13L 50-TNC13L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought England's Stove Works 13-NCL 50-SNC13L 50-TNC13L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data England's Stove Works 13-NCL 50-SNC13L 50-TNC13L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, England's Stove Works 13-NCL 50-SNC13L 50-TNC13L you will learn all the available features of the product, as well as information on its operation. The information that you get England's Stove Works 13-NCL 50-SNC13L 50-TNC13L will certainly help you make a decision on the purchase.
If you already are a holder of England's Stove Works 13-NCL 50-SNC13L 50-TNC13L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime England's Stove Works 13-NCL 50-SNC13L 50-TNC13L.
However, one of the most important roles played by the user manual is to help in solving problems with England's Stove Works 13-NCL 50-SNC13L 50-TNC13L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device England's Stove Works 13-NCL 50-SNC13L 50-TNC13L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
