Instruction/ maintenance manual of the product 7088-3 Empire Comfort Systems
Go to page of 12
R-1842 Page 1 WARNING: If the information in this manual is not followed exactly , a fir e or explosion may result causing pr op- erty damage, personal injury or loss of life. — Do not stor e or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
R-1842 Page 2 Introduction Always consult your local Building Department regarding regulations, codes or ordinances which apply to the installation of a floor furnace. Instructions to Installer 1. Installer must leave instruction manual with owner after installation.
R-1842 Page 3 Some people cannot smell well. Some people cannot smell the odor of the chemical stench put into the gas. You must find out if you can smell the odorant in propane. Smoking can decrease your ability to smell. Being around an odor for a time can affect your sensitivity or ability to detect that odor.
R-1842 Page 4 GENERAL INSTRUCTIONS Follow a few simple rules and your Empire furnace will give you years of trouble-free heating. When your furnace is ready for installation, operation or repair here are a few DO's and DON'T's.
R-1842 Page 5 WALL THERMOSTAT The wall thermostat is simply a switch that turns on when it is cold and off when it is comfortable. When the thermostat turns on it connects the small amount of electricity to the main gas valve (part of combination valve in furnace), which then opens.
R-1842 Page 6 WHERE THERE'S FIRE, THERE'S SMOKE —SOMETIMES If your furnace has never been used before, it will smoke a little the first time it gets hot. This is normal and will only last for a short time. Open a window to clear away the smoke.
R-1842 Page 7 FOR YOUR SAFETY READ BEFORE LIGHTING WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life. A. This appliance has a pilot which must be lighted by hand.
R-1842 Page 8 WARNING A 6" clearance must be maintained between the flue or vent connector and beneath the entire bottom of the appliance. This appliance needs fresh air for safe operation and must be installed so there are provisions for adequate combustion and ventilation air.
R-1842 Page 9 3. Pilot lights but furnace won't turn on. a. Turn furnace control rod to ON. b. Check thermostat to make sure it's turned up high enough. c. Check thermostat connections to make sure wires are connected tightly. d. Turn furnace control handle to OFF and check main burner for dirt (see G, J).
R-1842 Page 10 Step 2. Allow 30 minutes for the furnace to cool down. Step 3. Remove the floor register. Step 4. Turn the furnace control handle to OFF (see H). Step 5. Put the register temperature control into the FULL HEAT position (see H). Step 6. Spread old newspapers on the floor.
R-1842 Page 11 SER VICE RECORD PROBLEM DATE ADJUSTMENTS MADE OR PARTS REPLACED A history of changes and adjustments can be invaluable information if an inquiry is made to the manufacturer.
R-1842 Page 12 PH: 1-800-851-3153 F AX: 1-800-443-8648 E-MAIL: empire@accessus.net WEB SITE: www .empirecomfort.com Empire Comfort Systems, Inc. Nine Eighteen Freeburg A ve.
An important point after buying a device Empire Comfort Systems 7088-3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Empire Comfort Systems 7088-3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Empire Comfort Systems 7088-3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Empire Comfort Systems 7088-3 you will learn all the available features of the product, as well as information on its operation. The information that you get Empire Comfort Systems 7088-3 will certainly help you make a decision on the purchase.
If you already are a holder of Empire Comfort Systems 7088-3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Empire Comfort Systems 7088-3.
However, one of the most important roles played by the user manual is to help in solving problems with Empire Comfort Systems 7088-3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Empire Comfort Systems 7088-3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
