Instruction/ maintenance manual of the product -129 Elk
Go to page of 6
1 PO Box 100 • Hildebran, NC 28637 • 800-797-9355 • 828-397-4200 Fax 828-397-4415 • www .elkproducts.com • info@elkproduct s.com Computer Sound Card Interface The ELK-129 Computer Sound Card.
2 129 Overview APPLICATION All ELK Voice Recordable Annunciator Modules can record & store voice, music or sound effects for later playback. There are basically two methods to record sound into th.
3 129 Software Installation (ELK -120/124 ONL Y) NOTE: The following ELK-129 “Waveloader” software installation is not required for the ELK-MM447 or ELK-MV480 modules which are programmed through the Magic Module Programming Software. See previous page.
4 Refer to Figure 1 when making the following connections: 1. Strip the ends of the 2-conductor wire and connect one end to the step down transformer and the other end to the AC terminals on the ELK-129 (located under the cover). Plug the transformer into an AC receptacle.
5 Figure 1. Hookup (ELK -120/124 ONL Y) To Computer Speaker Out To Amplified Speakers To 12V 20VA Transf ormer 12V 20VA ELK Recordable Modu le (ELK-120 or ELK-124 ) 8 OHM SPEAKER (To listen to t he module's playba ck) .
6 NOTE: This section explains how to program an ELK-120 or ELK-124. For other ELK Recordable Modules models, please refer to the installation instructions that accompany the Recordable Module. If you have completed the hookup and software installations , you are ready to program your first unit.
An important point after buying a device Elk -129 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Elk -129 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Elk -129 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Elk -129 you will learn all the available features of the product, as well as information on its operation. The information that you get Elk -129 will certainly help you make a decision on the purchase.
If you already are a holder of Elk -129, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Elk -129.
However, one of the most important roles played by the user manual is to help in solving problems with Elk -129. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Elk -129 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
