Instruction/ maintenance manual of the product W 345 B/M Electrolux
Go to page of 14
W 345 B/M W 355 B/M W 365 B W 375 B MANUAL FOR USE AND MAINTENANCE graphic project VISUAL DIVISION Milano S3 1 E 3 4 U K ELECTROLUX EUROCLEAN IT ALIA SP A Località Novella T erza 20070 Guardamiglio-Italy T elephon nr .
INDEX INTRODUCTION.................................................................. 1 UNP ACKING ...................................................................... 2 TECHNICAL SPECIFICA TION ................................................. 3 MACHINE CONTROLS .
INTRODUCTION This manual is a guide to the efficient use of the machine and also contains practical information concerning the functioning, adjustments and user maintenance of your new scrubber/drier . Y our machine has been designed and constructed to ensure maximum performarnce and ease of operation in a wide variety of applications.
UNP ACKING OPTIONALS 23 2 Check that you have received following parts together with the machine: 1 - Connecting hose for squeegee 2 - Plastic bag with cables 3 - Squeegee 4 - Documents Kit of cable to transform machine from mains version to batter y operated version.
TECHNICAL SPECIFICA TION 3 OPTIONALS 22 (*) with the membrane (optional) TECHNICAL SPECIFICA TION MODELS W345B/M W355B/M W365B W375B W orking width (mm) 430 538 628 728 Width of squeegee (mm) 700 800 .
13 24 56 7 8 9 TROUBLE SHOOTING 21 MACHINE CONTROLS 4 10 11 12 13 14 15 16 17 18 19 20 PROBLEM POSSIBLE CAUSE CHECK Nothing works. No power . Is the batter y plugged in. Is the mains lead plugged in and switched on. Is the mains socket live. No liquid supply to the brushes.
PREP ARA TION FOR USE 5 SAFETY AND F AUL TS 20 Partially unscrew the two middle levers on the squeegee. Push the squeegee into the locating lugs as illustrated and fully tighten the levers. (pull the lever up to disingage it and make its rotation free).
PREP ARA TION FOR USE 6 MAINTENANCE 19 For models working with batteries follow instructions below , whereas in the case of mains operated models the transformer has already been placed inside the machine and needs no further installation.
- + - + - + - + MAINTENANCE 18 PREP ARA TION FOR USE 7 The machine may now be run for trial purposes but before putting it into ser vice the batteries should be charged to bring them up to their maximum capacity . New batteries will gradually “run in” and increase in capacity to a maximum in about the first 10 charge/discharge cycles.
PREP ARA TION FOR USE 8 CHANGING BRUSHES 17 Drop the brushes (one or two depending on the model) roughly side by side in front of the machine, the actual position does not matter . Switch the machine on by turning the key in the key-switch a quarter turn clockwise.
CHANGING BRUSHES 16 PREP ARA TION FOR USE 9 Lower the brush unit by pushing the pedal to the right to unlatch it. Then allow it to rise as far as it will go. Push the machine for ward then back about 50mm (2”) to ensure the drive has located in the brushes.
SCRUBBING AND DR YING OPERA TION 10 SCRUBBING AND DR YING OPERA TION 15 Open the tank lid. Fill the left tank with water to within about 75mm (3”) from the top edge then add the scrubbing detergent in a quantity to make a dilution according to its instruction.
SCRUBBING AND DR YING OPERA TION 14 SCRUBBING AND DR YING OPERA TION 11 Press the brush “on/off” push button: the indicator will light and the brush motors will start. Lower the brush unit by pushing the pedal to the right to unlatch it. Drive the machine for ward by holding the hand- grips.
SCRUBBING AND DR YING OPERA TION 12 SCRUBBING AND DR YING OPERA TION 13 When the machine is ready for scrubbing select the estimated amount of clean liquid required by pressing the detergent flow control on/off push button; an indicator will light which can be increased in three steps for var ying the quantity of liquid delivered to the brushes.
An important point after buying a device Electrolux W 345 B/M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux W 345 B/M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux W 345 B/M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux W 345 B/M you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux W 345 B/M will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux W 345 B/M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux W 345 B/M.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux W 345 B/M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux W 345 B/M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
