EN
3M logo
Official user manual

3M SCP712

24 pages·829 KB·Projector·PDF·ENDEFRITNLJA
3M SCP712
Table of Contents 1 sections Table of Contents ShowHide
Page 1 of the 3M SCP712 user manual
Page 1 · click to enlarge
Page 1
3M SCP712 diagram (page 1)
Fig. 1
3M SCP712 diagram (page 1)
Fig. 2
3M SCP712 diagram (page 1)
Fig. 3
3M SCP712 diagram (page 1)
Fig. 4
3M SCP712 diagram (page 1)
Fig. 5
3M SCP712 diagram (page 1)
Fig. 6
3M SCP712 diagram (page 1)
Fig. 7

3M Mobile Interactive Solutions Division 1-800-328-1371 © 3M 2008 All Rights Reserved. www.3m.com/meetings 78-6971-1389-8 (1/2008) 3

Page 2 of the 3M SCP712 user manual — Table of Contents
Page 2 · Contents
Contents

Contents

Page 3 of the 3M SCP712 user manual — Regulatory Notices
Page 3 · click to enlarge
Page 3

INTRODUCTION

Thank you for choosing 3M equipment. This product has been produced in accordance with 3M’s quality and safety standards to provide smooth and trouble free use in the years to come. For optimum performance, please follow the operating instructions carefully. We hope you will enjoy using this high performance product in your classroom, meetings, presentations, and training sessions. This product is Class A and can not be sold into the home market. The 3M logo and 3M are registered trademarks of 3M Company. Vikuiti is a trademark of 3M Company. Digital Light Processing is a trademark or registered trademark of Texas Instruments. All other trademarks or registered trademarks are property of their respective companies.

Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly set forth in a written agreement signed by an authorized officer of 3M.

Product Patents This product is covered by one or more of the following patents:

U.S. Patent Number D555,184 U.S. Patent Number 7,123,426 U.S. Patent Number 7,126,767 U.S. Patent Number 7,271,964

Regulatory Notices

EEC STATEMENT: This machine was tested against the 89/336/EEC (European Economic Community) for EMC (Electro Magnetic Compatibility) and fulfills these requirements. Video signal cables: Only use cables delivered by the manufacturer.

Page 4 of the 3M SCP712 user manual — Explanation of Signal Words and Symbols in Safety Labels and Instructions
Page 4 · click to enlarge
Page 4

Safety Information Please read, understand, and follow all safety information contained in these instructions prior to the use of this projector. Retain these instructions for future reference.

Intended Use Before operating the machine, please read the entire manual thoroughly. This product was designed, built and tested for use indoors, using 3M lamps and hardware. The use of other replacement lamps, outdoor operation or different voltages has not been tested and could damage the projector or peripheral equipment and/or create a potentially unsafe operating condition.

This projector is designed to operate in a normal office/classroom environment.

  • 5˚ to 35˚C (41˚ to 95˚F)
  • 30-70% RH (without condensation)
  • 0-2134m (0-7000 feet) above sea level

The ambient operating environment should be free of airborne smoke, grease, oil and other contaminants that can affect the operation or performance of the projector.

Use of this product in adverse conditions will void the product warranty.

Explanation of Signal Words and Symbols in Safety Labels and Instructions

Page 5 of the 3M SCP712 user manual — SAVE THESE INSTRUCTIONS
Page 5 · click to enlarge
Page 5

WARNING English

  • To reduce the risk associated with exposure to hazardous voltage: - Do not remove any screws other than those specified in the lamp replacement instructions.
  • To reduce the risk associated with hazardous voltage: - Do not operate this projector in wet environments or outdoors. - Do not modify this projector or power cord. - Do not attempt to service the projector; other than the lamp cartridge there are no user serviceable parts inside the
  • projector. - Contact a 3M authorized service provider for service. - Disconnect power cord when the projector is not in use, during lamp replacement, and while cleaning. - Do not allow water or other liquids to enter the projector.
  • To reduce the risk associated with hazardous voltage and/or fire: - Replace power cord if damaged. - Contact a 3M authorized service provider if the projector becomes damaged. - Use a grounded extension cord with a rating at least equal to that of the projector. - Connect this projector to a grounded outlet.
  • To reduce the risk associated with hot surface of lamp cartridge: - Unplug the projector from the electrical outlet and allow the lamp to cool for 60 minutes before replacing the lamp.
  • To reduce the risk associated with choking: - Keep the battery and battery cover away from children and pets.
  • To reduce the risk associated with environmental contamination due to mercury: - Hg: Lamp contains mercury. Don't throw in trash. Dispose according to local, state, or federal laws. See <a href="http://www.lamprecycle.org" rel="nofollow noopener" target="_blank">www.lamprecycle.org</a> or call 1-800-328-1371.
  • To reduce the risk associated with lamp rupture related hazards: - In event of lamp rupture, call 3M authorized service provider for repair. Ruptured lamp repair is not user serviceable. - Wash your hands thoroughly if contact with ruptured lamp debris has taken place. - Ventilate the area where the lamp rupture occurs. The lamp operates at high temperature.
  • To reduce the risk associated with hazard voltage, and/or impact, and/or tripping, and/or intense visible light: - Do not use this projector around unsupervised children.
  • To reduce the risk associated with sharps, premature lamp failure, exposure to mercury: - Always handle the fragile lamp module with care. - Replace the lamp module when the lamp replacement message appears. - Never replace the lamp module with a previously used lamp module.

CAUTION

  • To reduce the risk associated with intense visible light: - Avoid looking directly into the projector lens while the lamp is on.
  • To reduce the risk associated with impact of a falling projector: - Use only the 3M brand wall/ceiling mounting hardware kit if wall or ceiling mounting is desired. - Installation of the 3M brand wall/ceiling kit must only be performed by qualified personnel. - Adhere strictly to the proper installation procedure as outlined in the installation instructions when installing the 3M
  • wall/ceiling kit. - Always operate the unit on a flat, sturdy, and horizontal surface.
  • To reduce the risk associated with explosion, and/or chemicals from leaking battery: - Use only with battery type AAA. - Orient the battery’s plus (+) and minus (-) terminals according to the markings found on the remote control. - Do not leave the battery in the remote for an extended period of time. - Do not heat, disassemble, short, recharge, or expose the batteries to fire or high temperature. - Do not carry batteries loose in your pocket or purse. - Avoid eye and skin contact in the event that battery would leak. - Do not mix used and new batteries.
  • To reduce the risk associated with tripping, and/or impact: - Position the power cord and data cable so that they can not be tripped over.
  • To reduce the risk associated with environmental contamination due to battery chemicals: - Dispose of exhausted batteries in accordance with applicable federal, state and local regulations.

SAVE THESE INSTRUCTIONS

Page 6 of the 3M SCP712 user manual — Table of Contents
Page 6 · click to enlarge
Page 6

Contents of Shipping Box This projector is shipped with the necessary cables required for standard VCR, PC or laptop computer connections. Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase.

The shipping carton contains the following items illustrated below. If any of these items are missing, please contact your place of purchase.

3M SCP712 — Table of Contents diagram (page 6)
Fig. 8 · Table of Contents
1. SCP712 projector 2. Remote Control Transmitter (AAA batteries included) 3. VGA-cable 1.8M 15-Male 4. Power cord 5. Operator’s Guide 6. USB 1.8m cable (not shown)

Optional Accessories (not shown) 1. Fixed Wall Mount 2. Folding Wall Mount 3. Folding Wall Mount with speakers 4. I/O Module 5. Annotation Pod 6. RS232 Adapter

Keep Your Packing Materials Save the shipping box and packing materials in the event this product should require shipping to a 3M Service Center for repair. Use packing material to protect projector.

What’s Next? Take a few minutes to review the machine characteristics before you setup and operate the projector. We hope you will enjoy using this high performance product in your meetings, presentations and training sessions. This product has been produced in accordance with 3M’s highest quality and safety standards to provide smooth and trouble-free use in the years to come.

Page 7 of the 3M SCP712 user manual — Table of Contents
Page 7 · click to enlarge
Page 7

Product Description The 3M SCP712 integrates metal halide lamp and Digital Light Processing™ (DLP) technology. It accepts input from computer and/or video sources and projects a bright image.

Machine Characteristics The 3M SCP712 offers the following features:

  • Native Resolution 1024 x 768
  • On-screen menu with 9 languages (English, French, Deutsch, Spanish, Italian, Japanese, Chinese Traditional, Chinese Simplified, Korean)
  • Digital keystone correction
  • Lamp Life of 2000 hours at 230W (Normal mode)
  • Lamp Life of 3000 hours at 200W (ECO mode)
Page 8 of the 3M SCP712 user manual — Parts Identification
Page 8 · click to enlarge
Page 8

Parts Identification

1. Lens 2. Remote Control IR Sensor 3. Height Adjustment Feet 4. Power Cord Connection 5. Input Terminals 6. Slot for Kensington™ Lock 7. USB Port 8. Focus Adjustment 9. On/Off Standby
3M SCP712 — Parts Identification diagram (page 8)
Fig. 9 · Parts Identification
3M SCP712 — Parts Identification diagram (page 8)
Fig. 10 · Parts Identification

3 2 3 4 7 5 6

Front View · Top View

Page 9 of the 3M SCP712 user manual — Terminal Connections
Page 9 · click to enlarge
Page 9

Terminal Connections

3M SCP712 — Terminal Connections diagram (page 9)
Fig. 11 · Terminal Connections
#SCP712Function 1A/C PowerConnect AC power cord to projector. 2USB ServiceConnect projector USB (B-type) to computer USB port. 3COMPUTER/COMPONEN TInput RGB signal from a computer. 4CONTROLConnect projector RS-232 control port to computer serial port.

I/O Module Terminal Connections (optional accessory)

3M SCP712 — Terminal Connections diagram (page 9)
Fig. 12 · Terminal Connections

USB USB Control Signal

1 3 4 5 2

#I/O ModuleFunction 1Audio Power (Input)Connect audio power cord to Audio Power terminal. 2USB (2 ports)Connect projector USB to computer USB port. 3CONTROLConnect IO/Module to projector CONTROL terminal. 4SignalConnect I/O Module to projector COMPUTER/COMPONENT port. 5Audio OutConnect IO/Module to external speakers.
Show 6 more labels / short text on this page
AC Power · Service Computer/ Component · Control · Audio Power · Audio Out · To Projector
Page 10 of the 3M SCP712 user manual — Setup and System Configuration
Page 10 · click to enlarge
Page 10

Setup and System Configuration

3M SCP712 — Setup and System Configuration diagram (page 10)
Fig. 13 · Setup and System Configuration
Page 11 of the 3M SCP712 user manual — Machine Specifications
Page 11 · click to enlarge
Page 11

Machine Specifications

ItemSpecification Acoustic Noise LevelNormal Mode: Typical 38 dB(A) ECO Mode: Typical 35 dB(A) Auto Detect & InstallAutomatically recognizes the connection of I/O module Automatically saves user adjustments Computer CompatibilityHorizontal Sync: 15 – 82 kHz Vertical Sync: 50 – 85 Hz Conditions for usage environmentRel Humidity: 30% to 70% Altitude/Temperature 0-5000 ft. (with Fan Normal Mode) 5°C to 35°C 5000-7000 ft. (with Fan High Mode) 5°C to 35°C 7000-10000 ft. (with Fan High Mode) 5°C to 25°C Dimensions343.5 x 321.6 x 155.3 mm (13.5x 12.7 x 6.1 inches) DMD Native Resolution1024H x 768V (XGA) FocusManual Adjustment Input / Output TerminalsVGA (mini D-sub 15-pin) connector Control connector USB AC power outlet Input rating100-240V AC, 50-60 Hz, 4.0A Lamp Life2000 hrs at 230W Normal mode 3000 hrs at 200W ECO mode LanguagesEnglish, French, Spanish, Deutsch, Italian, Japanese, Chinese Traditional, Chinese Simplified, Korean LensFocal Length = 8.9mm Power Consumption310W normal operation, 5W standby mode Video CompatibilityNTSC: M, N, 3.58Mz, 4.43 MHz PAL: B, D, G, H, I, M, N SECAM Wall/Ceiling Mount capabilityThree screw holes Weight4.14kg (9.2lbs)
Page 12 of the 3M SCP712 user manual — Operating Instructions
Page 12 · click to enlarge
Page 12

Operating Instructions

Projector Start Up Read the Important Safeguards before operating the SCP712. After all cable connections have been completed, the projector can be powered up.

For best results, please observe the following start up sequence.

1. Turn all of the connected equipment on. 2. Plug the supplied power cord into the AC inlet of the projector. 3. Press the On/Standby button on the projector or remote control. The lamp will turn on and an image will appear and grow brighter on the screen. 4. Check all ventilation slots and clear away any obstructions. 5. Raise/lower projector body to extend or retract feet to obtain best image height. Note: Rotate feet for fine adjustment. 6. Turn the focus adjustment (top of projector) to obtain the best image sharpness.

Stand By Mode When an image is not being projected, place the unit into standby mode.

1. Press the On/Standby button on the Remote Control. When the message “Press the power button to turn the unit off” displays, press the On/Standby button again. 2. The lamp will switch off and the power button will first turn red indicating the unit is in lockout and then after 90 seconds the button turns amber to indicate the unit is in standby mode. Note: In standby mode, the cooling fans will continue to run for 5 minutes and then turn off.

Start Up 1. Press the On/Standby button on Remote Control again to illuminate the lamp and project an image on the screen.

Page 13 of the 3M SCP712 user manual — Table of Contents
Page 13 · click to enlarge
Page 13

Menu Navigation To display the on screen menus, press the MENU button on the remote control. Use the remote control Up/Down ARROW buttons to select the desired menu (see table below), then pull the TRIGGER button (bottom of remote control) to display it.

Use the remote control ARROW buttons within a submenu to select the various options displayed on the screen, then pull the TRIGGER button to initiate that option or setting.

To exit an on-screen submenu, press the MENU button.

Main Menu The main menu is the first system menu to display when the MENU button is pressed. Click on the menu icons to display the desired submenu.

3M SCP712 — Table of Contents diagram (page 13)
Fig. 14 · Table of Contents
3M SCP712 — Table of Contents diagram (page 13)
Fig. 15 · Table of Contents

Menu Icon Menu Description

Input Menu – Select the desired computer or video input source.

Picture Menu – Adjust the following picture features: mode, brightness, contrast, color intensity, tint, sharpness, video noise reduction, aspect ratio, and menu reset. Note: Displays only when input source is connected.

Advanced Picture Menu – Adjust the following settings for the detected signal source: over scan, brightness/color, horizontal position, vertical position, frequency, phase, & menu reset.

Audio Menu – Adjust the following audio settings: volume, mute, audio input (stereo mini-1, stereo mini-2, RCA), menu reset.

Setup Menu – Select or adjust the following settings: menu languages, auto shutoff timer, keystone, lamp hours, lamp mode, fan mode, projection mode, factory reset, or menu reset.

Information Menu – Display the current system information: input resolution, H/V frequency, lamp hours, system hours, IP address/net mask/gateway for I/O module Ethernet interface, user revision.

Main Menu · Advanced

Page 14 of the 3M SCP712 user manual — Table of Contents
Page 14 · click to enlarge
Page 14

Input Menu The Input Menu, shown below, is used to select the desired computer or video input source to be displayed on the projector.

Input Input SourceComputer 1
3M SCP712 — Table of Contents diagram (page 14)
Fig. 16 · Table of Contents

Computer 1 / Component 1 Computer 2 / Component 2 RCA Video S-Video

Feature Description Select input source

1. Computer 1 / Component 2 2. Computer 2 / Component 2 [Displays only when I/O module is connected] 3. RCA Video-Composite video [Displays only when I/O module is connected] 4. S-Video [Displays only when I/O module is connected]
Page 15 of the 3M SCP712 user manual — N/A N/A
Page 15 · click to enlarge
Page 15

Picture Menu The Picture Menu, shown below, is used to adjust the picture settings to display the best possible image.

Picture Input SourceComputer 1
3M SCP712 — Table of Contents diagram (page 15)
Fig. 17 · Table of Contents
  • Picture Mode Enhanced Photo ► Brightness 50 |···········
  • ············| Contrast 50 |···········
  • ············| Color 50 |···········
  • ············| Tint 0 |···········
  • ············| Sharpness 0 |···········
  • ············| Video Noise Reduction On Aspect Ratio Full Screen Advanced Reset

Feature Description Range Default Picture Mode

Select the best mode to optimize the projector image. 1. Max Brightness 2. Enhanced Photo 3. Photo 4. Enhanced

N/A

Brightness Adjust brightness of displayed image 0–100 50

Contrast Adjust the contrast (dark to light) in the displayed image 0–100 50

Color (see Note) Adjust the intensity of color in the displayed image 0–100 50

Tint (see Note) Adjust the balance of red to green for video signals. -15–+15 0

Sharpness Adjust the displayed image to look sharper or softer -15–+15 0

Turn noise reduction ON or OFF N/A Off

Aspect Ratio Set aspect ratio to: [Full Screen or 16:9 or Native] N/A Full Screen

This option only displays for Computer2/Component2 input and when I/O Module is connected. See next page.

N/A N/A

Reset Reset values in Picture menu only N/A N/A

Show 4 more labels / short text on this page
VGA-Max Brightness · Video-Enhanced Photo · Video Noise Reduction · Advanced
Page 16 of the 3M SCP712 user manual — VGA = 100
Page 16 · click to enlarge
Page 16

Picture Menu – Advanced The Picture Menu with the Advanced option selected, shown below, is used to adjust the projected image for Computer and Component inputs only.

Picture Input SourceComputer 1
  • Over Scan 97 |···········
  • ············| Color / Brightness 10 |·······················
  • | Horizontal Position 0 |···········
  • ············| Vertical Position 0 |···········
  • ············| Frequency 0 |···········
  • ············| Phase 0 |···········
  • ············| Reset

Feature Description Range Default

Over Scan Adjust cropping of image boundaries from 90th to 100th percentile (increments of 1 percent) 90–100 Video = 97

VGA = 100

Adjust the white peaking value of the DMD. (0 = lowest white peaking value, 10 = highest value) 0–10 Computer = 10

Adjust horizontal position of projected image (Only for Computer 1 or Computer 2 input source) N/A 0

Adjust vertical position of projected image (Only for Computer 1 or Computer 2 input source) N/A 0

Frequency Adjust the horizontal width of the projected image (Only for Computer 1 or Computer 2 input source) -50–+50 0

Phase Adjust clock phase to reduce image distortion (Only for Computer 1 or Computer 2 input source) -15–+15 0

Reset Reset values in Advanced Picture menu only N/A N/A

Show 4 more labels / short text on this page
Brightness / Color · Video = 3 · Horizontal Position · Vertical Position
Page 17 of the 3M SCP712 user manual — PC
Page 17 · click to enlarge
Page 17

Audio Menu (Displays only if I/O Module is connected) The Audio Menu, shown below, is used to adjust the audio settings and select the audio input source to play through the projector.

Audio Input SourceComputer 1
3M SCP712 — Table of Contents diagram (page 17)
Fig. 18 · Table of Contents

Volume 10 | ● | Mute Off ► Audio Input Stereo Mini 1 Stereo Mini 2 RCA Reset

Feature Description Range Default Volume Adjust volume level (0 = muted, 20 = full volume) 0–20 10

Mute Turn mute mode ON and OFF N/A OFF

Select the audio input source to process. Stereo Mini 1 – VGA/Component Stereo Mini 2 – VGA2/Component RCA – S-Video/Component

PC

Reset Reset values in Advanced Picture menu only N/A N/A

Audio Input

Page 18 of the 3M SCP712 user manual — Table of Contents
Page 18 · click to enlarge
Page 18

Setup Menu The Setup Menu, shown below, is used to configure the basic projector operating parameters.

Setup Input SourceComputer 1
3M SCP712 — Table of Contents diagram (page 18)
Fig. 19 · Table of Contents
  • Language English ► Auto Shutoff Minutes Off |···········
  • ············ Keystone 0 |···········
  • ············| Reset Lamp Hrs Lamp Mode Normal Fan Mode Normal Projection Mode Front Projection Factory Reset All Reset

Feature Description Range Default

Select the language for menu displays [English, French, Spanish, Deutsch, Italian, Japanese, Mandarin Traditional, Mandarin Simplified, Korean]

Set the number of idle minutes (no input source detected and no commands issued) before the projector will automatically shut off.

Vertical keystone adjustment. Stereo Mini 1 – VGA/Component Stereo Mini 2 – VGA2/Component RCA – S-Video/Component

Reset Lamp Hours Reset lamp hours status indicator. See Information Menu. N/A N/A

Lamp Mode Normal, ECO N/A Normal

Fan Mode Normal, High N/A Normal

Projection Mode Front, Rear, Front Ceiling, Rear Ceiling N/A Front

Factory Reset Reset all menu items to FACTORY DEFAULT settings N/A N/A

Reset Reset values in Setup menu only N/A N/A

Show 6 more labels / short text on this page
Language · N/A English · Auto Shutoff · 0–60 10 · Keystone · -15–+15 0
Page 19 of the 3M SCP712 user manual — Table of Contents
Page 19 · click to enlarge
Page 19

Information Menu The Information Menu, shown below, is used to display current projector configuration settings.

Information Input SourceComputer 1
3M SCP712 — Table of Contents diagram (page 19)
Fig. 20 · Table of Contents

Input Resolution 1024 x 768 H Frequency 31.75 KHz V Frequency 60 Hz Lamp Hours 1235 System Hours 2356 IP Address 192.168.1.10 Net Mask 255.255.255.0 Gateway 192.168.1.1 User Ver. 0.0.8

Input Resolution Displays the current input Resolution

H Frequency Displays the current input H-Frequency

V Frequency Displays the current input V-Frequency

Lamp Hours Displays the current lamp operating hours for the installed lamp

System Hours Displays the current total system time accumulated

IP Address (see note) Displays the current IP Address for the I/O module Ethernet interface

Net Mask (see note) Displays the current Net Mask for the I/O module Ethernet interface

Gateway (see note) Displays the current gateway for the I/O module Ethernet interface

User Revision Displays the current User Version

Feature Description

Page 20 of the 3M SCP712 user manual — INPUT/ SOURCE
Page 20 · click to enlarge
Page 20

Remote Control Functions Use a USB cable to connect from the PC to the SCP712 or SCP712 I/O Module (if equipped) and aim the remote control toward the projection screen or at the sensor. Press desired remote control button to send a signal to the projector.

3M SCP712 — Table of Contents diagram (page 20)
Fig. 21 · Table of Contents

Press to enter Standby mode. Note: A confirmation message will display to ensure unit does not get turned off accidentally.

ON/ STANDBY

Press and press again to select different computer and video inputs.

INPUT/ SOURCE

[Computer 1/Componet 1 ➙ Computer 2/Componet 2 ➙

RCA Composite Video ➙ S-Video]

Volume +: Press to increase speaker volume.

Volume -: Press to decrease speaker volume.

Mute: Press to switch the audio sound ON or OFF.

Menu: Press to display the Main Menu. When a menu is open, press to exit menu.

R/Click Performs remote Right Mouse click function.

Up Arrow Moves cursor upward through menu items.

Down Arrow Moves cursor downward through menu items. Left Arrow Moves cursor left through menu items. Right Arrow Moves cursor to right through menu items.

Mouse Pad Allows remote mouse functions. Pan function when in Magnify mode.

Press to replace projected image with black image. Press again to return projection image.

Blank:

Freeze: Press to freeze current image. Press again to return to active image.

Press to initiate a 10 minute digital timer. Change timer by pressing up/down arrows to alter amount in 1 minute intervals.

Timer:

Zoom +: Press and hold to increase the size of the displayed image up to 200 percent.

Zoom -Press and hold to decrease size of the displayed image down to 100 percent

Pull trigger for remote LEFT mouse button functions (e.g. Move .ppt slides forward or backwards). In menu mode, use for remote Enter / Select functions.

Bottom Trigger

Page 21 of the 3M SCP712 user manual — Maintenance
Page 21 · click to enlarge
Page 21

Maintenance

3M SCP712 — Maintenance diagram (page 21)
Fig. 22 · Maintenance

Installing or Replacing Batteries 1. Push on the cover and slide it upward to unlatch it. 2. Remove the cover. 3. Install two AAA batteries with the correct polarities and then replace the cover. Slide it downward until it locks into place. Note: Verify the battery cover is fully latched before

using the remote control.

Installing Batteries

Page 22 of the 3M SCP712 user manual — Lamp Replacement
Page 22 · click to enlarge
Page 22

Lamp Replacement

3M SCP712 — Lamp Replacement diagram (page 22)
Fig. 23 · Lamp Replacement
Page 23 of the 3M SCP712 user manual — Common Problems and Solutions
Page 23 · click to enlarge
Page 23

Troubleshooting

Common Problems and Solutions

Symptom Cause Solution No power. The power cord is disconnected. Insert the power cord into AC socket.

The desired input source is not selected. Press the remote control Input button to select a desired input source.

Connect the cable to correct input source. No picture or sound.

The cables from the input source are not connected.

The input source is not turned on or not displaying an image. (e.g. If a notebook computer, the external monitor port is not turned on).

Turn on input source.

The internal temperature is too high. Check exhaust for obstructions. The lamp will not ignite or has turned off. The lamp has reached maximum life or has prematurely failed. Replace lamp.

Connect the cables to the correct input source. Sound is heard with no picture.

The VGA/Video cables are not connected.

The VGA/Video/Audio cables are connected to the wrong input.

Change Input Menu to correct video input setting.

The audio cables are connected to the wrong input.

Connect the cables to the correct input source.

Check the audio/video configuration. Set proper configuration through the menu.

Picture is displayed with no sound

The volume is set to Minimum. Turn up Volume.

The Mute is on. Turn off Mute.

The brightness setting is too low. Adjust the brightness Picture is dark or dim.

The lamp needs to be replaced. Replace lamp.

The input source is not active. A signal must be present for the input to be selected.

Connect an active input source to unit. Desired input source cannot be detected.

The input device (e.g. computer, DVD player, etc.) is not turned on. Turn on input source.

The remote control does not work.

The remote control is not facing the remote control sensor.

Face the remote control toward the remote control sensor.

The remote control is too far from the sensor.

Operate the remote control within 5 meters.

An obstruction is between the remote control and the sensor.

Remove obstacle.

The remote control’s batteries are exhausted or inserted wrong.

Correctly insert batteries.

Page 24 of the 3M SCP712 user manual — N6A 4TI
Page 24 · click to enlarge
Page 24

Technical Support Contact:

3M SCP712 — Technical Support Contact: diagram (page 24)
Fig. 24 · Technical Support Contact:

3M Mexico, S.a. de C.V

Please recycle.

Building A147-5N-01

P.O. box 5757

6801 River Place Blvd.

Mexico, D.F. 07000

95006 Cerge Pontoise Cedex

N6A 4TI

Show 11 more labels / short text on this page
3M Austin Center · 3M Canada · 3M Europe · Apartado Postal 14-139 · Boulevard de l'Oise · Litho in USA · London, Ontario · Austin, TX 78726-9000 · 78-6971-1389-8 (6/2008) · Mexico · France
Fix-it

Troubleshooting

Common problems, likely causes, and what to do.

ProblemPossible causeRemedy
Symptom p.23
No power. p.23
No picture or sound. p.23
No picture or sound. p.23
The lamp will not ignite or has turned off. p.23
The lamp will not ignite or has turned off. p.23
Sound is heard with no picture. p.23
Sound is heard with no picture. p.23
Picture is displayed with no sound p.23
Picture is displayed with no sound p.23
Picture is dark or dim. p.23
Picture is dark or dim. p.23
Desired input source cannot be detected. p.23
Desired input source cannot be detected. p.23
The remote control does not work. p.23
The remote control does not work. p.23

Ask about the 3M SCP712

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the 3M SCP712

Be the first to ask — other owners or our team will answer.

Original document

3M SCP712 manual PDF

24 pages·829 KB·Projector·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…