Instruction/ maintenance manual of the product GK903TSIPO Electrolux
Go to page of 20
GK903TSIP O .............................. .................. ................ ............ .......... ....... EN HOB USER MANUAL.
CONTENTS 1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. SAFETY INFORMATION Before the installation and us e of the appliance, carefully read the supplied instructio ns. The manufacturer is not responsible if an incorrect in stallation and use causes in- juries and damages. Always keep t he instructions with the appliance for future reference.
• Never try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blan ket. • Do not store items on the cooking surfaces.
• The appliance must be earthed. • Before carr ying out any operation make sure that the appliance is disconnected from the power supply. • Use the correct electricity mains ca ble.
2.3 Care and Cleaning WARNING! Risk of damage to the appliance. • Clean regularly the appliance to prevent the deterioration of the surface material. • Do not use water spray and steam to clean the appliance. • Clean the appliance with a moist soft cloth.
Sensor field Function 4 Timer indicat or of cooking zone To show for which cook ing zone you set the time. 5 To lock / unlock the control panel. 6 To activate the Power function. 7 To set the cooking zone . 8 / To increase or decrease the time. 9 To activate and deactivate the appliance.
4.2 Automatic Switch Off The function deacti vates the appliance automatical ly if: • All cooking zones are deactivated ( ). • You do not set the heat setting after you activate the appliance. • You spill something or put something on the contro l panel for more than 10 seconds, (a pan, a cloth, etc.
4.7 Timer Count Down Timer Use the Count Down Timer to set how long the cooking zone operates for only this one time. Set the Count Down Timer after the selection of the cooking zone.
First set the heat setting. To start this function touch . The sym- bol comes on for 4 seconds. The Timer stays on. To stop this function touch . The heat setting that you set before comes on. When you stop the appliance, you al so stop this function.
The bottom of the cookware must be as thick and flat as possi- ble. Cookw are dim ensio ns : induction cook- ing zones adapt to the dimension of the bottom of the cookware automatically to some limit. 5.2 Use of the cooking zones IMPORTANT Put the cookware on the cross which is on the surface that you cook.
He at set tin g Use to: Time Hints Nominal power consump- tion 1 - 3 Solidify: fluffy ome- lettes, baked eggs 10 - 40 min Cook with a lid on 3 – 8 % 3 - 5 Simmer rice and milk- based dishes, heating.
7. TROUBLESHOOTING Problem Possible cause Remedy You cannot activate the appliance or operate it. Activate the appliance again and set the heat setting in less th an 10 seconds. You touched 2 or mo re sensor fields at the same time. Touch only one sens or field.
Problem Possible cause Remedy comes on. No cookware is on the cooking zone. Put cookware on the cooking zone. The cookware is incor- rect. Use the correct cook- ware. The diameter of the bot- tom of the cookware is too small for the cooking zone. Use cookware with cor- rect dimensions.
If you tried the above solutions and can- not repair the problem, speak to your dealer or the customer service. Give the data from the rating plate, three digit letter code for the glass ceramic (it is in the cor- ner of the glass surface) and an error message that comes on.
8.5 Assembly min. 50mm min. 500mm min. 2mm < 20 mm min. 2 mm A B A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min 30 mm min. 500 mm > 20 mm min. 2 mm A B A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 500 mm Mounting on the top min. 55mm R 5 mm 380 +1 mm 880 +1 mm min.
min. 38 mm min. 2 mm Integrated mounting 904 +1 mm 404 +1 mm 380 +1 mm 880 +1 mm min. 55mm R10mm R5mm 12mm 7mm min. 12 mm min. 2 mm min. 38 mm min. 2 mm 9. TECHNICAL INFORMATION Modell GK903TSIPO P rod.Nr. 949 594 366 00 Typ 58 GCD E2 AU 220 - 240 V 50 - 60 Hz Induction 6.
Cooking zones power Cooking zone Nominal Power (Max heat setting) [W] Power Func- tion activa- ted [W] Power func- tion maxi- mum dura- tion [min] Minimum cookware di- ameter [mm] Right —21 0 mm 230.
d’un justificatif d’achat). Notre garantie couvre les frais de mains d’œuvres et de déplacement, ainsi que les piè ces de re- change. Les conditions de garantie ne sont pas valables en ca s d.
www.electrolux.com/shop 892958857-A-302013.
An important point after buying a device Electrolux GK903TSIPO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux GK903TSIPO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux GK903TSIPO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux GK903TSIPO you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux GK903TSIPO will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux GK903TSIPO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux GK903TSIPO.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux GK903TSIPO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux GK903TSIPO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
