Instruction/ maintenance manual of the product EHL8550FOK Electrolux
Go to page of 20
EHL8 550F OK EN HOB USER MAN UAL.
CONTENTS 1. SAFETY INFORMATION............................................................................................ 3 2. SAFETY INSTRUCTIONS.......................................................................................... 4 3. PRODUCT DESCRIPTION.
1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
• Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. • Do not use a steam cleaner to clean the appliance. • After use, switch off the hob element by its control and do not rely on the pan detector.
• Use the strain relief clamp on the cable. • Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets • Do not use multi-plug adapters and extension cables.
up when you have to move them on the cooking surface. • This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating. 2.4 Care and cleaning • Clean regularly the appliance to prevent the deterioration of the surface material.
Sensor field Function Comment 1 ON / OFF To activate and deactivate the hob. 2 Lock / The Child Safety Device To lock / unlock the control panel. 3 STOP+GO To activate and deactivate the function. 4 - Timer indicators of cook- ing zones To show for which zone you set the time.
3.4 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicator shows the level of the residual heat. The induction cooking zones make the heat necessary for cooking process directly in the bottom of the cookware.
4.6 Automatic Heat Up If you activate this function you can get a necessary heat setting in a shorter time. The function sets the highest heat setting for some time and then decreases to the correct heat setting. To activate the function the cooking zone must be cold.
To activate the function: touch . Touch or of the timer to set the time. When the time comes to an end, the sound operates and 00 flashes. To stop the sound: touch . The function has no effect on the operation of the cooking zones. 4.9 STOP+GO This function sets all cooking zones that operate to the lowest heat setting.
• The function decreases the power to the other cooking zones connected to the same phase. • The heat setting display of the reduced zones changes between two levels. 5. HINTS AND TIPS WARNING! Refer to Safety chapters. 5.1 Cookware For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly.
5.5 Examples of cooking applications The relation between the heat setting and the cooking zone consumption of power is not linear. When you increase the heat setting it is not proportional to the increase of the cooking zone consumption of power. It means that the cooking zone with the medium heat setting uses less than a half of its power.
6.2 Cleaning of the hob • Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the dirt can cause damage to the hob. Put the special scraper on the glass surface at an acute angle and move the blade on the surface.
Problem Possible cause Remedy Automatic Heat Up function does not operate. The zone is hot. Let the zone become suffi- ciently cool. The highest heat setting is set. The highest heat setting has the same power as the function. The heat setting changes between two levels.
Problem Possible cause Remedy comes on. There is an error in the hob because a cookware boils dry. Automatic Switch Off and the overheating protec- tion for the zones operate. Deactivate the hob. Re- move the hot cookware. Af- ter approximately 30 sec- onds, activate the zone again.
8.4 Assembly min. 50mm min. 500mm min. 2mm < 20 mm min. 2 mm A B A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min 30 mm min. 500 mm > 20 mm min. 2 mm A B A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 500 mm R 5mm min. 55mm 490 +1 mm 750 +1 mm min. 38 mm min.
min. 12 mm min. 2 mm 9. TECHNICAL INFORMATION 9.1 Rating plate Modell EHL8550FOK PNC 949 596 285 00 Typ 58 GBD CF AU 220 - 240 V 50 - 60 Hz Induction 7.
symbol with the household waste. Return the product to your local recycling facility or contact your municipal office. * www.electrolux.com 18.
ENGLISH 19.
www.electrolux.com/shop 892965569-A-492013.
An important point after buying a device Electrolux EHL8550FOK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux EHL8550FOK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux EHL8550FOK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux EHL8550FOK you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux EHL8550FOK will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux EHL8550FOK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux EHL8550FOK.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux EHL8550FOK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux EHL8550FOK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
