Instruction/ maintenance manual of the product EHL6740FOK Electrolux
Go to page of 20
EHL6740FO K .............................. .................. ................ ............ .......... ....... EN HOB USER MANUAL.
CONTENTS 1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. SAFETY INFORMATION Before the installation and us e of the appliance, carefully read the supplied instructio ns. The manufacturer is not responsible if an incorrect in stallation and use causes in- juries and damages. Always keep t he instructions with the appliance for future reference.
• Never try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blan ket. • Do not store items on the cooking surfaces.
pliance or hot cookware, when you connect the appliance to the near sock- ets • Make sure the appliance is installed correctly. Loose and inco rrect electricity mains cable or plug (if applicable) can make the terminal become too hot. • Make sure that a shock protection is in- stalled.
not use abrasive products, abrasive cleaning pads, solvents or metal ob- jects. 2.4 Disposal WARNING! Risk of injury or suffocation. • Contact your municipal authority for in- formation on how to discard the appli- ance correctly. • Disconnect the appliance from the mains supply.
sensor field function 5 Timer indicator s of cooking zones To show for which coo king zone you set the time. 6 To lock/unlock the control panel. 7 To activate the Power function. 8 A control bar To set the heat setting. 9 / To increase or decrease the time.
4.2 Automatic Switch Off The function deacti vates the appliance automatical ly if: • All cooking zones are deactivated ( ). • You do not set the heat setting after you activate the appliance. • You spill something or put something on the contro l panel for more than 10 seconds, (a pan, a cloth, etc.
limited period of time ( see Technical In- formation chapter). After that, the induc- tion cooking zone automatically sets back to highest heat setting. To activate, touch , comes on. To deactivate, change the heat setting. 4.7 Power management The power management divides the pow- er between two cooking zones in a pair (see the illustration).
4.9 STOP+GO The function sets all cooking zones that operate to the lowest heat setting ( ). When operates, you cannot change the heat setting. The function does not stop the timer function. • To activate this function touch . The symbol comes on. • To deactivate this function touch .
5.1 Cookware for induction cooking zones Use the induction cooking zones with correct c ookware. Cookware material • correct: cast iron, steel, enamelled steel, stainless steel, the bottom made of multi-layer (with correct mark from a manufacturer).
He at set tin g Use to: Time Hints Nominal power consump- tion 1 Keep warm the food you cooked as required Put a lid on a cook- ware 3 % 1 - 3 Hollandaise sauce, melt: butter, chocolate, gelatine 5 - .
an acute angle and move the blade on the surface . – Remove after the applia nce is sufficiently cool: limescale rings , water rings, fat stains, shiny metal- lic discolorations. Use a special cleaning agent for glass ceramic or stainless steel. 2. Clean the appliance with a moist cloth and some detergent.
Problem Possible Remedy There is no signal when you touch th e panel sen- sor fields . The signals are deactiva- ted. Activate th e signals. Refer to “OffSound control”. comes on. The Automatic Switch Off operates. Deactivate the appliance and activate it again.
Problem Possible Remedy comes on. The cooling fan is blocked. Check if objects block the cooling fan. If comes on again, speak to the service center. comes on. The electrical connection is incorrect. The appli- ance is connected only to one phase. Speak to a qualified elec- trician to check the instal- lation (see the connection illustration).
8.3 Assembly min. 50mm min. 500mm min. 2mm < 20 mm min. 2 mm A B A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min 30 mm min. 500 mm > 20 mm min. 2 mm A B A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 500 mm 490 +1 mm 560 +1 mm R 5mm 55mm min. 12 mm min.
If you use a protection box (an additional accessory 1) ), the front airflow space of 2 mm and protective floor dire ctly below the appliance are not necessary. You can not use the protection box if you install the appliance above an oven. 1) The protection box accessor y may not be availa ble in some countries.
18 www.electrolux.com.
ENGLISH 19.
www.electrolux.com/shop 892951703-C-402012.
An important point after buying a device Electrolux EHL6740FOK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux EHL6740FOK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux EHL6740FOK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux EHL6740FOK you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux EHL6740FOK will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux EHL6740FOK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux EHL6740FOK.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux EHL6740FOK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux EHL6740FOK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
