Instruction/ maintenance manual of the product EHI8550FOK Electrolux
Go to page of 20
EHI8 550F OK EN HOB USER MAN UAL.
CONTENTS 1. SAFETY INFORMATION............................................................................................ 3 2. SAFETY INSTRUCTIONS.......................................................................................... 4 3. PRODUCT DESCRIPTION.
1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
• Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. • Do not use a steam cleaner to clean the appliance. • After use, switch off the hob element by its control and do not rely on the pan detector.
• Use the strain relief clamp on the cable. • Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets • Do not use multi-plug adapters and extension cables.
up when you have to move them on the cooking surface. • This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating. 2.4 Care and cleaning • Clean regularly the appliance to prevent the deterioration of the surface material.
Sensor field Function Comment 1 ON / OFF To activate and deactivate the hob. 2 Lock / The Child Safety Device To lock / unlock the control panel. 3 STOP+GO To activate and deactivate the function. 4 - Timer indicators of cook- ing zones To show for which zone you set the time.
3.4 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicator shows the level of the residual heat. The induction cooking zones make the heat necessary for cooking process directly in the bottom of the cookware.
4.6 Bridge function This function connects two left side cooking zones and they operate as one. First set the heat setting for one of the left side cooking zones. To activate the function: touch . To set or change the heat setting touch one of the control sensors.
To see how long the cooking zone operates: set the cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows how long the zone operates. To deactivate the function: set the cooking zone with and touch or . The indicator of the cooking zone goes out.
4.14 Power management function • Cooking zones are grouped according to the location and number of the phases in the hob (see illustration). • Each phase has a maximum electricity loading of 3700 W. • The function divides the power between cooking zones connected to the same phase.
• Use the residual heat to keep the food warm or to melt it. 5.4 Öko Timer (Eco Timer) To save energy, the heater of the cooking zone deactivates before the count down timer sounds. The difference in the operation time depends on the heat setting level and the length of the cooking operation.
6. CARE AND CLEANING WARNING! Refer to Safety chapters. 6.1 General information • Clean the hob after each use. • Always use cookware with clean bottom. • Scratches or dark stains on the surface have no effect on how the hob operates. • Use a special scraper for the glass.
Problem Possible cause Remedy There is water or fat stains on the control panel. Clean the control panel. An acoustic signal sounds and the hob deactivates. An acoustic signal sounds when the hob is deactiva- ted. You put something on one or more sensor fields.
Problem Possible cause Remedy and a number come on. There is an error in the hob. Disconnect the hob from the electrical supply for some time. Disconnect the fuse from the electrical sys- tem of the house. Connect it again. If comes on again, speak to an Author- ised Service Centre.
8.4 Assembly min. 50mm min. 500mm min. 2mm < 20 mm min. 2 mm A B A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min 30 mm min. 500 mm > 20 mm min. 2 mm A B A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 500 mm R 5mm min. 55mm 490 +1 mm 750 +1 mm min. 38 mm min.
min. 12 mm min. 2 mm 9. TECHNICAL INFORMATION 9.1 Rating plate Modell EHI8550FOK PNC 949 596 287 00 Typ 58 GBD CF AU 220 - 240 V 50 - 60 Hz Induction 7.
symbol with the household waste. Return the product to your local recycling facility or contact your municipal office. * www.electrolux.com 18.
ENGLISH 19.
www.electrolux.com/shop 892965573-A-492013.
An important point after buying a device Electrolux EHI8550FOK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Electrolux EHI8550FOK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Electrolux EHI8550FOK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Electrolux EHI8550FOK you will learn all the available features of the product, as well as information on its operation. The information that you get Electrolux EHI8550FOK will certainly help you make a decision on the purchase.
If you already are a holder of Electrolux EHI8550FOK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Electrolux EHI8550FOK.
However, one of the most important roles played by the user manual is to help in solving problems with Electrolux EHI8550FOK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Electrolux EHI8550FOK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
