EN
3M logo
Official user manual

3M MP8650

32 pages·420 KB·Projector·PDF·ENDEFRITNLJA
3M MP8650
Table of Contents 48 sections MP8650 · Safeguards · INTENDED USE · IMPORTANT SAFEGUARDS · … ShowHide
Page 1 of the 3M MP8650 user manual — MP8650 Appareil de projection multimédia Guide de l’opérateur
Page 1 · click to enlarge
Page 1

MP8650 Multimedia Projector Operator’s Guide

MP8650 Appareil de projection multimédia Guide de l’opérateur

MP8650 Multimedia-Projektor Bedienerhandbuch

Portatil Multimedia MP8650 Manual del usuario

MP8650 Projettore multimedia Manuale dell’operatore

MP8650 Multimediaprojektor Brukerhåndbok

MP8650 Multimedia Projector Gebruiksaanwÿzing

3M MP8650 — MP8650 Appareil de projection multimédia Guide de l’opérateur diagram (page 1)
Fig. 1 · MP8650 Appareil de projection multimédia Guide de l’…
Page 2 of the 3M MP8650 user manual — MP8650
Page 2 · click to enlarge
Page 2

All statements, technical information, and recommendations related to Seller’s products are based on information believed to be reliable, but the accuracy or completeness thereof is not guaranteed. Before utilizing the product, the user should determine the suitability of the product for its intended use. The user assumes all risks and liability whatsoever in connection with such use.

Any statements or recommendations of the Seller which are not contained in the Seller’s current publications shall have no force or effect unless contained in an agreement signed by an authorized officer of Seller. The statements contained herein are made in lieu of all warranties, expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose which warranties are hereby expressly disclaimed.

SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT NOT LIMITED TO NEGLIGENCE OR STRICT LIABILITY, FOR ANY INJURY OR FOR AN DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF THE SELLER’S PRODUCTS.

We’re easy to reach

http://www.mmm.com/presentations e-mail: presentations@mmm.com

3M MP8650 — MP8650 diagram (page 2)
Fig. 2

Let us help you make the most of your next presentation. We offer every- thing from presentation supplies to tips for better meetings. And we’re the only transparency manufacturer that offers a recycling program for your used transparencies. For late-breaking news, handy references and free product samples, call us toll-free in the continental United States and Canada, 7:30 a.m. to 5:30 p.m. (CST). Or visit our Internet Web site.

3M Austin Center Building A145-5N-01 6801 River Place Blvd. Austin, TX 78726-9000

3M Canada P.O. Box 5757 London, Ontario, Canada N6A 4T1

3M Mexico, S.A. de C.V. Apartado Postal 14-139 Mexico, D.F. 07070 Mexico

3M Europe Boulevard de l’Oise 9500 Cerge Pontoife Cedex France

Printed on 50% recycled wastepaper, including 10% post-consumer wastepaper

Litho in U.S.A.3M 1997 78-6970-7312-6 Rev. F

Page 3 of the 3M MP8650 user manual — MP8650
Page 3 · click to enlarge
Page 3

Safeguards 1

Warranty 2

Section 1: Unpack 3

1-1. Contents of Shipping Box 3

1-2. Inventory List 3

1-3. Keep Your Packing Materials 3

1-4. What’s Next? 3

Section 2: Product Description 4

2-1. Machine Characteristics 4

2-2. Parts Identification List 4

Section 3: Set Up 5

3-1. Cable Connections 5

3-2. Projector Set Up 9

3-3. Now What? 10

Section 4: Operating the Projector 11

4-1. Turning On the Projector 11

4-2. Adjusting Image Size and Focus 12

4-3. Adjusting the Volume 12

4-4. Adjusting the Picture 12

4-5. Memory Function 13

4-6. Inverting the Image 13

4-7. Image Position 13

4-8. Video System 13

4-9. Setting Apple Macintosh Monitor Mode (Windowed or Compressed) 14

4-10. Menu Languages 14

4-11. Turning Off the Projector 14

Section 5: Remote Control 15

5-1. How to Operate the Remote Control 15

Section 6: Lamp Information 17

6-1. Metal Halide Projector Lamp 17

Section 7: Maintenance 18

7-1. Cleaning 18

i 3M 1997 3M Multimedia Projector MP8650

Page 4 of the 3M MP8650 user manual — MP8650
Page 4 · click to enlarge
Page 4

Section 8: Troubleshooting 19

8-1. Service Information 19

Section 9: Technical Specifications 20

9-1. Specifications 20

9-2. S-Video Input Signal Terminal 20

9-3. Projector-to-Screen Distances 21

9-4. Physical Dimensions 21

9-5. Computer Video (RGB) Input Terminal 22

9-6. Computer (RGB) Signal Connection Modes 22

Section 10: Accessories 23

10-1. MP8650 Multimedia Projector Accessories 23

Appendix: Technical Information A–1

ii 3M 1997 3M Multimedia Projector MP8650

Page 5 of the 3M MP8650 user manual — SAVE THESE INSTRUCTIONS
Page 5 · click to enlarge
Page 5

Safeguards

INTENDED USE

Before operating the machine, please read the entire manual thoroughly. The 3M Multimedia Projector MP8650 was designed, built and tested for use indoors, using 3M brand lamps and nominal local voltages. The use of other replacement lamps, outdoor operation or different voltages has not been tested and could damage the projector or peripheral equipment and/or create a potentially unsafe operating condition.

IMPORTANT SAFEGUARDS

1. Read and understand all instructions before using. Pay particular attention to areas where this symbol ! is shown.

! WARNING – Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

! Caution – Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. It may also be used to alert against unsafe practices.

2. Close supervision is necessary when any appliance is used by or near children. Do not leave appliance unattended while in use.
3. Never look directly into the projector lens when the lamp is on. The metal halide lamp produces a strong light which could damage your eyesight.

! 4. Care must be taken as burns can occur from touching hot parts.

5. Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged — until it has been examined by a qualified service technician.

! 6. Position the cord so that it will not be tripped over, pulled or contact hot surfaces.

7. If an extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used. Cords rated for less amperage than the appliance may overheat.
8. Always unplug appliance from electrical outlet before cleaning and servicing and when not in use. Grasp plug and pull to disconnect.
9. To reduce the risk of electric shock, do not immerse this appliance in water or other liquids.
10. To reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualified technician when service or repair work is required. Incorrect reassembly can cause electric shock when the appliance is subsequently used.
11. The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or injury to persons.
12. Connect this appliance to a grounded outlet.

! 13. This unit is equipped with optical lenses and should not be exposed to direct sunlight.

14. Keep ventilation openings free of any obstructions.
15. Always remove the lens cap when the projection lamp is on.

SAVE THESE INSTRUCTIONS

The information contained in this manual will help you operate and maintain your 3M MP8650 Multimedia Projector.

Page 6 of the 3M MP8650 user manual — LIMITATION OF LIABILITY
Page 6 · click to enlarge
Page 6

Warranty

THANK YOU FOR CHOOSING 3M

Thank you for choosing 3M multimedia projection equipment. This product has been produced in accordance with 3M’s highest quality and safety standards to ensure smooth and troublefree use in the years to come.

For optimum performance, please follow the operating instructions carefully. We hope you will enjoy using this high performance product in your meetings, presentations and training sessions.

LIMITED WARRANTY

3M warrants this product against any defects in material and workmanship, under normal use and storage, for a period of one year from date of purchase. Proof of purchase date will be required with any warranty claim. In the event this product is found to be defective within the warranty period, 3M’s only obligation and your exclusive remedy shall be replacement of any defective parts (labor included).

To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects.

LIMITATION OF LIABILITY

THE FOREGOING WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND 3M SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS. 3M SHALL NOT BE LIABLE FOR ANY DAMAGES, DIRECT, CONSEQUENTIAL, OR INCIDENTAL, ARISING OUT OF THE USE OR INABILITY TO USE THIS PRODUCT.

FCC STATEMENT – CLASS A: This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause interference to radio communications. It has been tested and found to comply with the limits for a Class “A” computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his/her own expense will be required to take whatever measures may be required to correct the interference.

EEC STATEMENT: This machine was tested against the 89/336/EEC (European Economic Community) for EMC (Electro Magnetic Compatibilty) and fulfills these requirements.

Video signal cables: Double shielded coaxial cables (FCC shield cable) must be used and the outer shield must be connected to the ground. If normal coaxial cables are used, the cables must be enclosed in metal pipes or in a similar way to reduce the interference noise radiation.

Video inputs: The input signal amplitude must not exceed the specified level. See Section 9.

IBM is a registered trademark of International Business Machines Corporation. Apple Macintosh and Apple Powerbook are registered trademarks of Apple Computer, Inc. Microsoft and Windows 95 are registered trademarks, and Windows and Windows for Work Groups are trademarks of the Microsoft Corporation. All other products are trademarks or registered trademarks of their respective companies.

Page 7 of the 3M MP8650 user manual — 1-4. What’s Next?
Page 7 · click to enlarge
Page 7

Section 1: Unpack

1-1. Contents of Shipping Box

The 3MMultimedia Projector MP8650 is shipped with the necessary cables required for standard VCR, PC, Apple Macintosh or laptop computer connections. Carefully unpack and verify that you have all of the items shown below in Figure 1-1.

3M MP8650 — 1-1. Contents of Shipping Box diagram (page 7)
Fig. 3 · 1-1. Contents of Shipping Box

S-VGA 832 x 624 (Black)

VGA 640 x 480 (Grey)

MP8650 Projector Remote Control Transmitter

Power Cord (US, Euro, UK) VGA Cable (15-15 pin M/M)

Video Cable (S-Video mini DIN4-pin)

Figure 1-1. Inventory of Shipping Box

1-2. Inventory List

The shipping carton contains the following items illustrated in Figure 1-1. If any of these items are missing, please contact your place of purchase.

MP8650 Multimedia Projector

VGA cable (15-15 pin male to male)

Remote control transmitter

Video cable (S-video mini DIN4-pin)

PC Serial cable

Apple Macintosh adaptor (S-VGA, VGA)

Operator’s Guide (not shown in Figure 1-1)

3-Conductor video/audio cable

To operate the Apple Macintosh mouse button functions via the MP8650 remote control transmitter requires the Apple Macintosh Mouse Receiver (accessory part). See Section 10 to order.

1-3. Keep Your Packing Materials

Save the shipping box and packing materials in the event the MP8650 should require shipping to a 3M Service Center for repair. The zoom lens should be completely retracted before shipping this product.

1-4. What’s Next?

After you have unpacked the MP8650 system and identified all the parts, you are ready to set up the projector.

Take a few minutes to review Section 2 to familiarize yourself with the MP8650 machine characteristics and then turn to Section 3 to set up the projector.

Show 7 more labels / short text on this page
Lens Cap · Apple Macintosh Adaptor · 3-Conductor Video/Audio Cable · PC Serial Cable · (AAA batteries included) · Power cord · Lens cap
Page 8 of the 3M MP8650 user manual — 2-2. Parts Identification List
Page 8 · click to enlarge
Page 8

Section 2: Product Description

2-1. Machine Characteristics

The 3MMultimedia Projector MP8650 integrates metal halide lamp and dichroic optics display technology into a single unit. It accepts input from two different computer sources and two video/audio sources and projects a bright super crisp image.

The MP8650 Multimedia Projector offers the following features:

Easy to set up and use

Horizontal and vertical image inverting

Portable (suitcase-style carrying handle)

function allows rear projection or ceiling mount

Metal halide projection lamp

High brightness lamp output (see note)

Horizontal and vertical image position control

800 x 600 SVGA/VGA image (NTSC, PAL,

On-screen menu to adjust video image

SECAM)

contrast, brightness, hue, saturation (color), sharpness, gamma, coring, horizontal position

XGA compatible (60/70 Hz)

On-screen menu to adjust computer video

Ability to display 16.7 million colors

(RGB) contrast, brightness, synchronization and phase and vertical/horizontal position

Two computer input connections

Two video input connections

Menus display in English, French, or Spanish

Fixed keystone correction

Full function remote control

PC/Apple Macintosh mouse emulation

The MP8650 is one of the brightest projectors in the marketplace. The brightness of your machine will vary depending on the ambient room conditions and contrast/brightness settings.

Dealer enabled RS232 control

Lighted, back-lit remote control keypad

Built-in speaker (1 Watt)

2-2. Parts Identification List

3M MP8650 — 2-2. Parts Identification List diagram (page 8)
Fig. 4 · 2-2. Parts Identification List

Figure 2-1. Identifying MP8650 Parts

1. Remote Control Transmitter 2. Lens 3. Carry Handle 4. Remote Control Sensor 5. Indicator Lights (Temperature, Lamp, Power) 6. Control Panel Keypad a. Standby Power Switch b. Input Selection c. Horizontal Inversion d. Vertical Inversion 7. Built-In Speaker 8. Height Adjustment Feet
9. Power Cord Connection 10. Computer video (RGB) Input Terminals a. RGB1/RGB2 (D sub 15-pin) b. Audio-L/Audio-R (RCA Jack) 11. Video/Audio Input Terminals a. S-Video1/S-Video2 (Mini DIN 4-pin) b. Video1/Video2 (RCA Jack) c. Audio-L/Audio-R (RCA Jack) 12. RGB/Audio L/R (monitor output) 13. Remote (not used) 14. Main Power Switch 15. RS232C Serial Mouse Connection

RGBS compatible · Power zoom · Power focus

Page 9 of the 3M MP8650 user manual — Terminal Connection Panel
Page 9 · click to enlarge
Page 9

Section 3: Set Up

3-1. Cable Connections

It only takes a few minutes to connect the 3MMultimedia Projector MP8650 to your computer, VCR or other video device (Figure 3-1).

3M MP8650 — 3-1. Cable Connections diagram (page 9)
Fig. 5 · 3-1. Cable Connections
3M MP8650 — 3-1. Cable Connections diagram (page 9)
Fig. 6 · 3-1. Cable Connections

Laserdisc or VCR (S-VHS output)

Figure 3-1. Typical Cable Configuration

Terminal Connection Panel

Take a moment to look over the input connection terminals (Figure 3-2) on the back of the projector. Connect your first RGB or Video input source to terminal #1 and your second input source to the terminal #2.

Terminal connectors for Computer1 (RGB1) and Computer2 (RGB2) are: RGB, Audio-L, Audio-R.

Terminal connectors for VIDEO/AUDIO 1/2 are: S-Video, Video, Audio-L, Audio-R.

Terminal connectors for MONITOR OUTPUT are: RGB, Audio-L, Audio-R.

Terminal connector for a PC serial mouse is the RS232C. Apple Macintosh computers require a mouse receiver (accessory part).

3M MP8650 — Terminal Connection Panel diagram (page 9)
Fig. 7 · Terminal Connection Panel

Figure 3-2. Input Connection Terminals

Show 5 more labels / short text on this page
Desktop or Laptop · Sound System · Laptop or Desktop · Electric Outlet · VCR (VHS output)
Page 10 of the 3M MP8650 user manual — Computer (RGB) Input Connection
Page 10 · click to enlarge
Page 10

Power Connection

! Caution

To prevent damage to equipment, all power to the MP8650 and input sources must be turned OFF during cable hook up.

The power cord (Figure 3-3) is detachable from the projector and has different connection plugs on each end. Plug the female end into the power cord terminal on the projector and the male end into a properly grounded electrical outlet.

Figure 3-3. Connecting the Power Cord

Computer (RGB) Input Connection

There are two input jacks available for connecting either desktop or laptop computers. Find the cable that fits your computer type. The MP8650 comes with two computer input cables. The first cable (Figure 3-4) fits IBM PC and compatible VGA video systems, and the other cable (Figure 3-5) fits on the end of the first cable and adapts it to fit AppleMacintosh computers and Apple Powerbook laptop computers.

3M MP8650 — Computer (RGB) Input Connection diagram (page 10)
Fig. 8 · Computer (RGB) Input Connection
3M MP8650 — Computer (RGB) Input Connection diagram (page 10)
Fig. 9 · Computer (RGB) Input Connection

Figure 3-4. IBM Compatible Computer

Figure 3-5. Apple Macintosh Computer

Monitor Loop-Through (640 x 480 mode)

For IBM compatible computers:

a Power down the computer b Connect the monitor cable to an RGB output port on the projector.

c Turn the power on. d Select the appropriate RGB input mode on the projector.

For Apple Macintosh type computers (640 x 480 mode):

a Power down the computer b Connect the 640 x 480 (grey color) adapter to the monitor output port on the computer or to the high density end of the laptop adapter.

c Connect the VGA cable from the adapter to the projector d Turn the power on. e Select the appropriate RGB input mode on the projector.

Monitor Pass-Through (832 x 624 mode): For Apple Macintosh computers, a gender changer (accessory part number 78-8118-3239-9) is required to complete the connection.

To complete the pass-through connections:

a Connect gender changer to 832 x 642 (black color) adapator. b Connect monitor cable to the gender changer.

c Connect other end of adapter to the projector monitor out port or connect VGA cable to adapter and the RGB out port on projector. d Turn power on.

Page 11 of the 3M MP8650 user manual — Video/Audio Connection
Page 11 · click to enlarge
Page 11

S-Video Connection

Some video devices can generate S-VHS video, or S-Video (Y/C). The MP8650 will accept this signal through the S-VIDEO1 or S-VIDEO2 connectors. The S-VHS cable has identical round four-pin connectors on either end (Figure 3-6). Connect one end to the S-Video jack on the input source device, and the other end to the S-VIDEO1 or S-VIDEO2 terminal on the MP8650. Remember to connect the audio cables for sound output.

Four-Pin Connector S-VHS Cable

3M MP8650 — S-Video Connection diagram (page 11)
Fig. 10 · S-Video Connection

Figure 3-6. S-Video Input

Video/Audio Connection

Find the small, circular connector on your camcorder, laserdisc player, VCR, or other video source marked VIDEO OUT, TO MONITOR, or something similar.

Use the 3-conductor video/audio cable and insert the video (white) connector into the video output jack of your video source device. Connect the other end into the MP8650 VIDEO1 or VIDEO2 connector.

Next, find the AUDIO OUT terminals on your VCR or other audio source. Insert the left and right audio cable connectors (Figure 3-7) to the input source. Connect the other end to the AUDIO-L and AUDIO-R terminals on the MP8650.

3M MP8650 — Video/Audio Connection diagram (page 11)
Fig. 11 · Video/Audio Connection

The MP8650 projector is a stereo device. However, the projector’s built-in speaker is monophonic. Stereo sound played through the speaker becomes monophonic due to an internal sound mixer that converts stereo to mono.

Figure 3-7. 3-Conductor Video/Audio Input Cable

If you are giving a multimedia presentation with stereo sound, you may want to consider connecting the MP8650 audio-out L/R jacks to a high-quality stereo system.

Page 12 of the 3M MP8650 user manual — RS-232C Serial Cable/Mouse Receiver Connection
Page 12 · click to enlarge
Page 12

RS-232C Serial Cable/Mouse Receiver Connection

The MP8650 remote control transmitter can be used to control the mouse button functions on your personal computer (requires serial cable included) or Apple Macintosh type computer (requires Apple Macintosh mouse receiver which is an accessory).

Always power down your PC or Apple Macintosh computer before making any cable connections.

PC Computer: Install the serial cable (Figure 3-8) to connect the serial mouse port on your computer to the RS-232C terminal on the MP8650 projector. A serial mouse driver must be loaded on your PC computer for this function to operate properly. It is best to reference the operating instructions for your computer before connecting an external mouse device of any kind.

To load a serial mouse driver on a computer using Microsoft Windows or Windows for Workgroups, go into the Windows Setup function. From Program Manager click Main; then click Windows Setup; (note the current mouse driver that is loaded); click Options; click Change System Settings. Choose Mouse. You will need to have the Serial Mouse on Comm 1 driver loaded. It will most likely be listed as Serial or Bus Mouse. Click OK to apply the serial mouse driver. Restart Windows if prompted.

Hint: To load a serial mouse driver on a computer using MicrosoftWindows95, go into the Control Panel. Click Start; select Settings; select Control Panel. Click on Mouse; select the General tab; (note the current mouse driver that is loaded); select Change; select Show all compatible devices; (note the current Manufacturer and Model); select Standard Mouse Type for Manfacturer; select Standard Serial Mouse. Click OK to apply the serial mouse driver. Restart windows when prompted.

3M MP8650 — RS-232C Serial Cable/Mouse Receiver Connection diagram (page 12)
Fig. 12 · RS-232C Serial Cable/Mouse Receiver Connection

Operating the mouse functions through the MP8650 remote control may disable the internal pointing device (IPD) on your computer. It is recommended that you review the operating instructions for your computer before connecting an external device of any kind.

PC Serial Mouse Port

See Technical–Appendix for RS32 Serial Command Codes.

Figure 3-8. PC Serial Mouse Cable

Apple Macintosh: Power off the computer then disconnect the current mouse cable. Now connect the mouse receiver plug to the computer mouse port (Figure 3-9).

The Apple Macintosh computer mouse can be hooked into the loop allowing both the computer mouse and MP8650 remote control transmitter to operate the computer mouse button functions. After the mouse receiver is connected to the mouse port, connect the mouse cable to the mouse receiver plug.

3M MP8650 — RS-232C Serial Cable/Mouse Receiver Connection diagram (page 12)
Fig. 13 · RS-232C Serial Cable/Mouse Receiver Connection

Figure 3-9. Apple Macintosh Mouse Receiver

Show 4 more labels / short text on this page
Projector RS232C Terminal · PC Serial Cable · Mouse Port · Mouse Cable
Page 13 of the 3M MP8650 user manual — Ceiling Mount Considerations
Page 13 · click to enlarge
Page 13

3-2. Projector Set Up

The meeting room is your operating environment and any stray light hitting the projection screen will become glare. It is best to use a meeting room without wide-open windows. If there are “light stripes” from venetian blinds, try to find a viewing area that’s away from them – and remember, the light stripes will move as the hour changes.

Ambient Light

Whenever you have a choice, light the room from the rear, away from the projection screen. The MP8650 has a brightness adjustment to achieve the best image possible.

Distance to Viewing Screen

The MP8650 can be used in a small or large meeting room to project a quality image from 51 cm (20 inches) to 762 cm (300 inches) in size. The distance between the projector and the viewing screen and the zoom lense setting (minimum to maximum) will determine the size of the projected image. Refer to the table in Section 9-3 to determine how far away from the viewing screen you need to place the projector to fill the screen with the projected image.

Remember that increasing the projector-to-screen distance also decreases the image’s brightness dramatically. In other words, as the image grows larger, it also grows dimmer.

For best results, experiment to find the right combination of projector-to-screen distance and room lighting.

Carrying Handle

The MP8650 has a carrying handle that folds into the top of the projector housing. To raise the handle, push up on the back end of the handle (Figure 3-10) and then lift upward.

3M MP8650 — Carrying Handle diagram (page 13)
Fig. 14 · Carrying Handle

Figure 3-10. Unfolding Handle

Ceiling Mount Considerations

An optional ceiling mount bracket (Figure 3-11) is required to install the MP8650 from the ceiling. For this type of installation, the image must be inverted.

3M MP8650 — Ceiling Mount Considerations diagram (page 13)
Fig. 15 · Ceiling Mount Considerations

Refer to section 4-6 Inverting the Image for more details.

See section 10-1 to order the ceiling mount kit.

Figure 3-11. Optional Ceiling Bracket

Page 14 of the 3M MP8650 user manual — 3-3. Now What?
Page 14 · click to enlarge
Page 14

Adjusting the Projector Elevation

The elevation can be adjusted by turning the foot adjuster (Figure 3-12) to raise or lower the angle of the projector.

3M MP8650 — Adjusting the Projector Elevation diagram (page 14)
Fig. 16 · Adjusting the Projector Elevation

Figure 3-12. Foot Adjuster

Both adjusting feet must be raised or lowered the same amount to project a level image on the viewing screen. The elevation can be adjusted up to seven degrees.

Rear Projection

A semi-transparent screen (Figure 3-13) can be used to project an image and view it from the backside of the viewing screen. For this type of installation, the image must be inverted. Refer to section 4-6 Inverting the Image for more details.

3M MP8650 — Rear Projection diagram (page 14)
Fig. 17 · Rear Projection

The projected light beam has an off-center ratio of 80% above and 20% below the center of the lens.

Figure 3-13. Rear Projection Viewing

3-3. Now What?

Your MP8650 is now connected and ready to power on. Turn to Section 4 for details on operating the projector.

Viewing Side · 90°

Page 15 of the 3M MP8650 user manual — ! Caution
Page 15 · click to enlarge
Page 15

Section 4: Operating the Projector

4-1. Turning On the Projector

Read the Important Safeguards before operating the MP8650 projector.

Refer to Section 3 to make all cable connections. When the input cables and power cords are connected, turn on the power, adjust the size and focus of the projected image and begin your presentation.

Power On: Turn on the projector power, then turn on the power to your input sources. The projector power switch is located on the backside of the projector in the lower right corner.

Press the power switch to ON to apply power to the projector. | = ON O = OFF

! Caution

Allow a projector that has been stored in a cold place to warm up to operating temperature 0°C to 35°C (32°F to 95°F) before applying power.

The Standby/Power-On indicator (Figure 4-1) will turn amber, indicating the unit is in the standby mode.

The lamp does not energize in the standby mode.

Remove Lens Cap: Remove the lens cap from the projection lens before energizing the lamp.

Projector Control Panel: The projector control panel is located on the side of the projector.

Energize Lamp: Press the POWER button on the projector control panel or the STANDBY button

3M MP8650 — ! Caution diagram (page 15)
Fig. 18 · ! Caution

on the remote control to energize the lamp. The Lamp indicator (Figure 4-2) will turn green to indicate that the metal halide lamp is warming up.

Figure 4-1. Projector Control Panel

The Standby/Power-On indicator (Figure 4-2) will turn from amber to green to indicate that the projector is in the operating mode. It takes a few moments for the projection lamp to reach its full light output.

3M MP8650 — ! Caution diagram (page 15)
Fig. 19 · ! Caution

When a metal halide lamp is first turned on, it is normal for it to make noise as the gas inside the bulb heats to the proper operating temperature.

Select Input: Press the INPUT button on the control panel or RGB or VIDEO button on the remote control to select the desired video or computer source. The current input source (RGB1, RGB2, Video1 or Video2) will display in the upper right corner.

Press INPUT again or press the

arrow (remote control) to select the next input source.

Figure 4-2. Indicator Lamps

Show 4 more labels / short text on this page
Standby/ Power-On · Temperature · Lamp · or
Page 16 of the 3M MP8650 user manual — RGB1
Page 16 · click to enlarge
Page 16

4-2. Adjusting Image Size and Focus

ZoomPress the ZOOM button, then press the

arrow to adjust the image size. If you cannot make the image fill the screen, locate the projector further back from the screen.

! Caution

To avoid damaging the internal projector components, DO NOT rotate the projection lens with your hand. Always use the remote control to adjust the focus.

FocusPress the FOCUS button to display the Focus pattern. Press the

arrow to increase or decrease the sharpness of the projected image.

4-3. Adjusting the Volume

Press and hold the VOL button to display the volume bar. Press the

arrow to increase or decrease the volume level.

Press the MUTE button on the remote control to silence the volume. Press MUTE again to return the sound.

MUTE

4-4. Adjusting the Picture

The projected image can be adjusted using the remote control transmitter.

For video signals (NTSC, PAL, SECAM) you can adjust:

Contrast (low to high)

Sharpness (soft to sharp)

Brightness (dark to light)

Hue (red to green)

Saturation (low to high)

For Computer (RGB) signals you can adjust:

Contrast (low to high)

Brightness (dark to light)

button to display Memory 1 or press MENU twice to display Memory 2 or press MENU three times to display Memory 3. (See Figure 4-3). If STANDARD displays instead of the Memory 1 screen, press the MENU button again.

RGB1

MEMORY1

CONTRAST +04

Figure 4-3. Memory Screen

Figure 4-4. Picture Adjustments

Show 17 more labels / short text on this page
or · or · or · Gamma · Coring (On/Off) · Horizontal position · Phase · Horizontal Position · P-Clock (synchronization) · Vertical Position · Press the MENU · = · Memory 1 · = · Memory 2 · = · Memory 3
Page 17 of the 3M MP8650 user manual — 4-8. Video System
Page 17 · click to enlarge
Page 17

Press the SELECT button

SELECT to display the first picture adjustment setting for Memory 1, 2 or 3. (See Figure 4-4). Press

to adjust this line or press SELECT again to display the next picture

adjustment setting or press RESET

to use the STANDARD default settings.

Using the standard default settings does not affect the Memory 1, Memory 2 or Memory 3 settings.

4-5. Memory Function

In addition to the standard factory default picture settings, the MP8650 will retain in memory, up to three different picture settings for RGB and Video input sources. If you use the MP8650 projector in meeting rooms that have different lighting considerations, you can adjust the picture for optimum performance and then save these settings under Memory 1 or Memory 2 or Memory 3 modes. Storing picture settings in memory will reduce the amount of setup time needed before a multimedia presentation.

To store picture settings in Memory menu:

1. Setup the MP8650 to project an image from the first input source (RGB1 or RGB2 or Video1 or Video2). 2. Press MENU to display STANDARD. 3. Now press MENU once for Memory 1 or twice for Memory 2 or three times for Memory 3 mode. 4. Press SELECT (once, twice, etc.) to display each picture setting that can be adjusted for the Memory 1, 2 or 3 mode ( see Step 3) or press RESET to use the factory defaults. Using the STANDARD factory defaults will not affect the Memory 1, 2, or 3 settings.

5. Press the + or – arrow to change each setting to produce the best picture. 6. Continue to press SELECT, then + or – until all the picture settings for the Memory 1, 2 or 3 mode (selected in Step 3) are properly set. 7. Press Menu to display the next Memory mode. 8. Move the projector to the next presentation room and repeat Steps 1-7 to record different picture settings for the next Memory mode.

4-6. Inverting the Image

The image can be inverted for ceiling mounted applications. Press the HORIZONTAL or VERTICAL button on the projector control panel to invert the image left to right or top to bottom. Press again to invert the image back.

4-7. Image Position

The computer (RGB) image can be moved vertically or horizontally to center it on the projection screen. On

the remote control, press the H/V button once, then press and hold the

arrow to set the horizontal

(left/right) position or press the H/V button twice, then press and hold the

arrow to set the vertical (up/down) position.

For video input, only the horizontal position can be adjusted.

4-8. Video System

The MP8650 has an automatic video detection function that will select the correct video system for NTSC, PAL or SECAM.

or · or · or

Page 18 of the 3M MP8650 user manual — 4-11. Turning Off the Projector
Page 18 · click to enlarge
Page 18

4-9. Setting Apple Macintosh Monitor Mode (Windowed or Compressed)

The MP8650 should be set to the desired Apple Macintosh monitor mode. Press the RGB button then RESET button on the remote control to switch between the ON compressed mode or OFF windowed mode. Press RESET again to switch the ON/OFF setting. ON ⇒ OFF ⇒ ON .

In the compressed mode (ON), an 832 x 624 image is fully displayed by the 800 x 600 projector format. In the windowed mode (OFF), you will need to scroll the display to see the full 832 x 624 image.

4-10. Menu Languages

The MP8650 will display on-screen menus in the following languages:

Press the VIDEO button then the RESET button on the remote control to switch the displayed language. Press RESET again to switch to the next language. English ⇒ French ⇒Spanish ⇒ English.

4-11. Turning Off the Projector

button (remote control keypad or projector control panel) to switch the projector to the standby mode. The lamp will shut off and the green indicator on the projector panel will turn to orange. Wait until the cooling fan motor cycles off before you press the Power Off switch (Figure 3-2).

Switching the power off before the fan has cycled off, will decrease the life of the projection lamp.

Show 4 more labels / short text on this page
English · French · Spanish · Press the STANDBY/ON
Page 19 of the 3M MP8650 user manual — FOCUS
Page 19 · click to enlarge
Page 19

Section 5: Remote Control

5-1. How to Operate the Remote Control

The remote control keypad (Figure 5-1) controls basic projector functions. To use the remote control, aim the remote toward the projection screen and press the desired button. The remote signal (Figure 5-3) will bounce off of the projection screen and back to the mouse receiver and sensor on the front of the projector.

Pressing some buttons will cause the remote control LED to flash. This is an indication that the current selection can be adjusted by pressing the

or buttons.

Remote Control Buttons

3M MP8650 — Remote Control Buttons diagram (page 19)
Fig. 20 · Remote Control Buttons

Press to switch between RGB1 or RGB2 input sources. Press RGB + RESET for ON-Compressed or OFF-Windowed display mode.

Press to switch between VIDEO1 or VIDEO2 input sources. Press VIDEO + RESET to switch displayed menu language. (Eng., Fr., Sp.)

Press to display the Volume bar. Press

VOL

volume or press RESET to return to default setting.

Press PHASE and the LED lamp will flash. Press

PHASE

adjust screen flicker or press RESET to return to the factory default setting.

After pressing Volume, Phase, H/V or MENU press RESET to return these buttons to the factory default setting.

Press BLANK to display a black background with no image. Press again to return the image to the screen.

BLANK

Press to switch the audio (speaker) sound ON (volume bar turns green) or OFF (volume bar turns red).

MUTE

Press once for Memory 1, twice for Memory 2 or three times for Memory 3. Press

MENU

SELECT to display the picture adjustments

(brightness, contrast, P-Clock). Press

to adjust or press

RESET to go to the STANDARD default setting.

Press to select the picture adjustment setting. See MENU button.

SELECT

Press to switch projector between projection and standby mode. In projection mode the lamp is ON. In standby mode the lamp is OFF.

Press ZOOM and the LED will begin to flash. Press

Figure 5-1. Remote Control

ZOOM

to decrease the size of the screen image.

Press to display the focus pattern. Press

FOCUS

decrease the sharpness of the screen image.

Show 9 more labels / short text on this page
or · to adjust speaker · or · to · or · to increase · or · to increase or · to
Page 20 of the 3M MP8650 user manual — Replacing the Batteries
Page 20 · click to enlarge
Page 20

Press once for horizontal (left/right) or press twice for vertical (up/down) position adjustment. The LED on the remote control will flash. Press

H/V

to adjust the setting or press the RESET

to return it to the factory default setting.

Using the Mouse Buttons

The PC serial cable or Apple Macintosh mouse receiver must be connected before the remote control buttons will operate the mouse functions. See RS232C Serial Cable/Mouse Receiver Connection in Section 3.

There are three mouse buttons L-Left, R-Right and DRAG and a mouse STICK for controling mouse functions. See Figure 5-2.

Mouse Stick: The mouse stick controls the position of the on-screen cursor or pointer.

L – Left Mouse Button: This button has the same function as a left mouse button.

R – Right Mouse Button: This button has the same function as a right mouse button. Press and hold the R button to backlight all the buttons on the remote control. After a few seconds, the backlighting will automatically turn off. Figure 5-2. Mouse Buttons

F gure 5 2. Mouse Buttons

DRAG: Use this button to hold and drop an object so it can be moved to a new position on the screen.

a. Press and release the DRAG button to select a highlighted object (similar to pressing down and holding a normal mouse key button). b. Use the mouse STICK to move the object to a new position. c. Press the DRAG button again to release the object.

Mouse Receiver – (Apple Macintosh computer only)

Set the mouse receiver on top of the MP8650 projector with the sensor facing the projection screen. Point the remote control at the projection screen to bounce the signal off of the screen and back to the mouse receiver.

3M MP8650 — Mouse Receiver – (Apple Macintosh computer only) diagram (page 20)
Fig. 21 · Mouse Receiver – (Apple Macintosh computer only)

The mouse receiver must be positioned so that the remote control signal can enter the sensor. You can either bounce the signal off of the projection screen or rotate the mouse receiver to aim the remote directly at it. Aiming the remote directly at the receiver will increase the effective signal distance.

For best results, always use fresh batteries in the remote control transmitter.

Figure 5-3. Using the Remote Control

Replacing the Batteries

The remote control uses three AAA batteries. The battery cover is located on the back of the remote control (Figure 5-4). Slide the door open to access the batteries. Make sure the polarity (+/–) on each battery matches the decal in the battery compartment.

3M MP8650 — Replacing the Batteries diagram (page 20)
Fig. 22 · Replacing the Batteries

Figure 5-4. Replacing the Batteries

or · button

Page 21 of the 3M MP8650 user manual — Change Lamp Message
Page 21 · click to enlarge
Page 21

Section 6: Lamp Information

6-1. Metal Halide Projector Lamp

If the projected image appears dark, the lamp may be getting old and in need of replacement. Under normal operating conditions, the lamp should last approximately 1000 hours. However, after time, the lamp brightness will slowly grow dimmer.

The TEMPERATURE indicator will come on if the lamp becomes too hot. If this happens, wait for the fan motor to stop running, turn the power off and let the projector cool. Check for airflow blockage, clean the air filter then turn the power on. If the TEMPERATURE indicator comes on again, call customer service or your dealer for assistance.

Display Lamp Operation Hours

You must turn both the projector lamp and main power OFF to reset the lamp hours.

a Press power button (Figure 4-1, side of projector) to turn projection lamp OFF. b Switch projector power OFF (Figure 2-1, back of projector) to turn main power off. c Press and hold the INPUT button (Figure 4-1, side of projector). d While pressing the INPUT button, switch main power ON (Figure 2-1, back of projector). This will display the Lamp Timer Clock.

e Read the number of lamp usage hours. f Check the RESET field to make sure it is set to NO. If RESET is set to YES, press the INPUT button to switch it back. (See note) g Press power button (Figure 4-1, side of projector) to turn projection lamp OFF and exit the lamp timer clock display mode. h Switch projector power OFF (Figure 2-1, back of projector) to turn main power off.

Note Changing RESET to YES will zero the hour clock. This should only be done by a qualified technician when a new lamp is installed.

Change Lamp Message

After 1000 hours of lamp operation, the message “Change Lamp” will display for 30 seconds each time the machine is powered on. This message is an indication that it is time to install a fresh lamp.

For best results, the lamp should be replaced after 1000 hours of usage.

For 110V machines, the lamp can be

For 220V machines, the lamp must be

replaced by the user (See Technical Appendix for instructions)

replaced by a qualified service repair technician.

Contact your nearest Service Repair Center or the Technical Assistance Center at:

In U.S. or Canada: 1-800-328-1371 In other locations, contact your local 3M Sales office.

Page 22 of the 3M MP8650 user manual — ! Caution
Page 22 · click to enlarge
Page 22

Section 7: Maintenance

7-1. Cleaning

For best performance, keep your projector free of excess dust and surface dirt.

Daily Cleaning

Use a soft cloth to remove dust from the projector housing.

Cleaning the Projection Lens

3M MP8650 — Cleaning the Projection Lens diagram (page 22)
Fig. 23 · Cleaning the Projection Lens

Use 3M Overhead Cleaner 676 to remove surface dirt and smudges from the projection lens (Figure 7-1) .

Cleaning the Air Filter

Figure 7-1. Cleaning the Lens

For best performance, clean the air filter every 50 hours of operations.

Unplug the power cord and carefully remove the air filter. The air filter (Figure 7-2) is located underneath the projector and is easily removed by sliding it out like a center desk drawer.

3M MP8650 — Cleaning the Air Filter diagram (page 22)
Fig. 24 · Cleaning the Air Filter
3M MP8650 — Cleaning the Air Filter diagram (page 22)
Fig. 25 · Cleaning the Air Filter
3M MP8650 — Cleaning the Air Filter diagram (page 22)
Fig. 26 · Cleaning the Air Filter

Figure 7-3. Vacuum Air Cleaner Filter

Figure 7-2. Slide out to remove air filter

Use a vacuum cleaner (Figure 7-3) to carefully remove dust and dirt from the bottom of the air cleaner screen.

Slide the air filter (top side up) back into place after it has been throughly cleaned.

! Caution

To avoid damaging the internal projector components, do NOT vacuum the inside of the projector.

Top Side · Top Side · Bottom

Page 23 of the 3M MP8650 user manual — 8-1. Service Information
Page 23 · click to enlarge
Page 23

Section 8: Troubleshooting

The MP8650 has been designed to be as simple and trouble-free to use as possible. If you should run into problems operating the projector, please review the troubleshooting information below.

Power does not come on Power cord must be plugged into an electric outlet.

Power switch must be turned on.

No picture and sound Set the projector to the correct input source.

Check all cable connections from input source to projector.

Make sure the input source power is on.

Picture displays but no sound Check all cable connections from input source to projector.

Press VOLUME then + on the remote control.

Press the MUTE button on the remote control.

Sound but no picture Check all cable connections from input source to projector.

Adjust the picture brightness. Press MENU, then press SELECT.

Weak saturation, incorrect hue Adjust picture saturation and hue (video only). Press MENU, then press

SELECT.

Picture is dark Adjust the picture brightness and contrast. Press MENU, then press SELECT.

Lamp may need replacement. Call customer service for assistance. See

Service Information below.

Picture is not sharp and clear Adjust focus and sharpness (video only). Press MENU, then press SELECT.

Projector is overheating. Turn the projector off and let it cool for 30 minutes.

Clean the air filter and check all ventilation holes for blockage.

LAMP indicator solid red, Power-On indicator blinking red

Turn the power off and let the projector cool. If the LAMP indicator comes on

again there may be a problem with the lamp. Call customer service for assistance. See Service Information below.

“Change Lamp” message displays when projector is powered on

The Change Lamp message will display for 30 seconds after power on when

the lamp clock reaches 1000 hours. This lamp is old and should be replaced by a qualified technician.

Power indicator is blinking red Check the air cleaner to make sure it is fully closed and latched.

TEMP indicator is red Turn the projector off and let it cool. Check the ventilation holes for blockage.

Remote control does not operate Replace old batteries with fresh AAA batteries.

The polarity of the batteries (+/–) must match the decal on the remote control.

Point the remote control toward the projection screen so the signal will

bounce back to the projector. Also make sure the remote control sensor on the front of the projector is not blocked from receiving the signal.

8-1. Service Information

For product information, product assistance, service information, or to order accessories, please call:

In U.S. or Canada: 1-800-328-1371 In other locations, contact your local 3M Sales office.

Problem Possible Solutions

Page 24 of the 3M MP8650 user manual — 9-2. S-Video Input Signal Terminal
Page 24 · click to enlarge
Page 24

Section 9: Technical Specifications

9-1. Specifications

Width 28.1 cm (10.95 inch) Height 35.6 cm (13.88 inch) Depth 48.6 cm (18.95 inch) Weight 14 kg (30.94 lbs) Panel size 8.1 cm (3.2 inches) Number of pixels per panel 480,000 pixels (H800 X V600), 3 panels = 1.44 million total pixels Dot defect < 0.011% of total pixel count Zoom lens 1.6:1 Metal halide lamp 350W, rated at 1000 hours to half brightness (110V–user can replace lamp, 220V–lamp must be replaced at service center) Power supply AC90-132V, 50/60Hz

AC170-260V, 50/60Hz Power consumption Maximum 470W (typical) Storage temperature range –20°C to 60°C (–4°F to 140°F) Operating temperature range 0°C to 35°C (32°F to 95°F) Input terminals S-Video: Mini DIN4-pin terminal

VideoRCA jack
AudioRCA jack

Computer (RGB): D sub15-pin HD terminal Input signals S-Video: Luminance 1.0V peak-to-peak , 75Ω termination Chroma 0.286V peak-to-peak (burst signal) 75Ω term.

Video1.0V peak-to-peak, 75 Ω termination
Audio260mvRMS, across 46k Ω

Computer (RGB1/RGB2): 0~0.7V peak-to-peak, 75Ω RGB (computer) input Audio: RCA jack Output terminals Computer (RGB): D sub15-pin HD terminal

AudioRCA jack Output signals Monitor: 0~0.7V peak-to-peak, 75 Ω

Audio: 7V peak-to-peak or less, 680Ω termination Batteries for remote control Three AAA, 1.5 Volt

9-2. S-Video Input Signal Terminal

The following illustration (Figure 9-1) identifies the terminal connections for the Mini DIN4-pin.

Figure 9-1. S-Video Input (Mini DIN4-pin)

Video input signal terminals are detected by the MP8650 in the following order of priority:

S-video input terminal

RCA jack input terminal

Chrominance Signal · Luminance Signal · Ground Ground

Page 25 of the 3M MP8650 user manual — 9-4. Physical Dimensions
Page 25 · click to enlarge
Page 25

9-3. Projector-to-Screen Distances

3M MP8650 — 9-3. Projector-to-Screen Distances diagram (page 25)
Fig. 27 · 9-3. Projector-to-Screen Distances

9-4. Physical Dimensions

The MP8650 projector has the following physical dimensions:

3M MP8650 — 9-4. Physical Dimensions diagram (page 25)
Fig. 28 · 9-4. Physical Dimensions

28.1 cm (11.06 in.)

48.6 cm (19.13 in.)

35.6 cm (13.33 in.)

25.6 cm (10.08 in.)

4.9 cm (1.9 in.)

3M MP8650 — 9-4. Physical Dimensions diagram (page 25)
Fig. 29 · 9-4. Physical Dimensions

11 cm (4.29 in.) 13.2 cm (5.1 in.)

65.5 cm (25.8 in.)

54.5 cm (21.46 in.)

Figure 9-2. Physical Dimensions

Page 26 of the 3M MP8650 user manual — 9-6. Computer (RGB) Signal Connection Modes
Page 26 · click to enlarge
Page 26

9-5. Computer Video (RGB) Input Terminal

The following illustration (Figure 9-3) shows the terminal connections for the D-sub 15 pin HD connector. Refer to the table below for a description of the wire to pin connections.

3M MP8650 — 9-5. Computer Video (RGB) Input Terminal diagram (page 26)
Fig. 30 · 9-5. Computer Video (RGB) Input Terminal

Figure 9-3. D-sub 15 pin Connector

9-6. Computer (RGB) Signal Connection Modes

The MP8650 projector automatically recognizes the following connection modes 1 to 18.

Scan Frequency Dot Clock Synchronization Signal*

Vertical width/polarity Computer A 1 800 x 600 35.16 56.25 36.000 72/ 2/ VESA 56Hz

B 2 800 x 600 37.88 60.32 40.000 128/+ 4/+ VESA 60Hz

C 3 800 x 600 48.08 72.19 50.000 120/+ 6/+ VESA 72Hz

D 4 800 x 600 46.88 75.00 49.500 80/+ 3/+ VESA 75Hz

E 5 832 x 624 49.73 74.55 57.283 64/– 3/– MAC 16 in.

F 6 640 x 480 35.00 66.67 30.240 64/– 3/– MAC 13 in.

G 7 640 x 480 34.98 66.62 31.334 64/– 3/– MAC LC

H 8 640 x 480 37.50 75.00 31.500 64/– 3/– VESA 75Hz

I 9 640 x 480 37.86 72.81 31.500 40/– 3/– VESA 72Hz

J 10 640 x 480 31.47 59.94 25.175 96/– 2/– IBM–VGA

K 11 640 x 400 37.86 85.08 31.500 32/– 3/+ VESA 400

K 12 640 x 350 37.86 85.08 31.500 32/+ 3/– VGA–350

L 13 640 x 400 31.47 70.09 25.175 96/– 2/+ VGA–400

L 14 640 x 350 31.47 70.09 25.175 96/+ 2/– VGA–350

M 15 640 x 400 24.83 56.42 21.053 64/– 8/– PC98–400

N 16 640 x 400 24.37 55.38 21.053 64/– 8/– FMR–400

O** 17 1024 x 768 48.363 60.004 65.000 136/– 6/– VESA 60Hz

P** 18 1024 x 768 56.476 70.069 75.000 136/– 6/– VESA 70Hz

* The synchronization signal widths represent the number of dots (horizontal) and the number of lines (vertical).

** Compressed mode only.

Show 10 more labels / short text on this page
Dot Clock Frequency · Connect · Pixel Number · Horizontal · Vertical · Horizontal width/polarity · (kHz) · (Hz) · (MHz) · Mode
Page 27 of the 3M MP8650 user manual — ! Caution
Page 27 · click to enlarge
Page 27

Appendix: Technical Information

A–1. MP8650 Lamp Replacement (110V machines only)

To replace the lamp on the 3MMP8650 Multimedia Projector, you will need the following:

2.5 mm hex wrench (shipped with lamp module) Metal halide lamp 78-6969-8306-9 or 78-6969-8422-4

! WARNING

There are high voltage parts inside the cabinet that could cause an electric shock. Always unplug projector when changing the lamp.

! Caution

Lamp and adjacent metal parts become extremely hot and can cause burns to your fingers. Allow the projector to cool for at least 1 hour before replacing the lamp.

! Caution

Do not touch the inside of the lamp glass with your fingers. Oil from your fingers can contaminate the lamp glass and cause it to crack or burst.

! Caution

Use care when inserting or removing the lamp module from the projector. Excessive force can cause damage to the lamp or projector.

1. Power OFF: Press the Standby/ON button and wait for the fan motor to cycle off. Then, turn off the power switch and UNPLUG THE POWER CORD. 2. Allow projector to cool: If the projector is at operating temperature, wait one hour to allow the metal parts to cool before continuing. 3. Remove Lamp Access Door: Use a 2.5 mm hex wrench to unscrew the lamp cover retaining screws (1) and gently open the cover. Set aside (2). 4. Remove Lamp Module: Slide the old lamp module (4) out of the projector body. 5. Insert Lamp Module: Carefully insert the new lamp module (5) into the opening and slide it all the way back into place. Check the lamp module to be sure that it is fully inserted and flush against the back wall. 6. Secure Lamp Module: Tighten the lamp module retaining screws (6) to secure the lamp in place. 7. Close and Secure Door: Close lamp access door (7) and tighten the retaining screws (8) to secure the door. Turn on projector and test lamp. If lamp light blinks green but lamp does not illuminate, reseat lamp (step 6).

3M MP8650 — ! Caution diagram (page 27)
Fig. 31 · ! Caution
3M MP8650 — ! Caution diagram (page 27)
Fig. 32 · ! Caution
3M MP8650 — ! Caution diagram (page 27)
Fig. 33 · ! Caution
3M MP8650 — ! Caution diagram (page 27)
Fig. 34 · ! Caution

A–1 3M 1997 3M Multimedia Projector MP8650

Page 28 of the 3M MP8650 user manual — N G CR
Page 28 · click to enlarge
Page 28

A–2. Serial Command Codes

All codes in this document are in ASCII Text. In order to get this to work you must send at the same communication setting as the projector.

This should be 9600 8N1.

For the rest of this document CR is a carriage return which is code 13.

There are two types of commands that can be sent to the projector. They are Write commands and Read commands.

User:

Projector:

O K CR

if it worked or:

N G CR

if it did not work.

User:

Projector:

O K Data CR

if it worked or:

N G CR

Power On/Off Write Codes D00W00 D00W01

Power On Power Off

Returns: 00 – Standby 01 – Power on but no lamp 02 – Power on and lamp 03 – Power off but fan running

A–2 3M 1997 3M Multimedia Projector MP8650

Show 6 more labels / short text on this page
Write Command Format · Code CR · Read Command Format · Code CR · Function Code Meaning · Read Codes D00R
Page 29 of the 3M MP8650 user manual — A–2. Serial Command Codes, continued
Page 29 · click to enlarge
Page 29

A–2. Serial Command Codes, continued

Input Source Write Codes D02W01 D02W02 D02W11 D02W12 D03W00

RGB 1 RGB 2 Video 1 Video 2 Shows what input is selected on–screen

Returns01 – RGB1 02 – RGB2 11 – Video1 12 – Video2

Volume Control Write Codes D04W00 to D04W14

Sets volume level to a value between 00 and 14 hex. This corresponds to 20 possible settings.

Returns00 to 14 hex

Focus Write Codes D05W00 D05W01 D05W10 D05W11 D05W20

300ms Clockwise 300ms Counterclockwise Continuous Clockwise Continuous Counterclockwise Turn off motor

Zoom Write Codes D06W00 D06W01 D06W10 D06W11 D06W20

300ms Clockwise 300ms Counterclockwise Continuous Clockwise Continuous Counterclockwise Turn off motor

Mute Write Codes D07W00 D07W01

Mute off Mute on

Returns00 – mute is off 01 – mute is on

Brightness Write Codes D13W00 to D13W14

Sets brightness level to a value between 00 and 14 hex. This corresponds to 20 possible settings.

Returns00 to 14 hex

Blank Write Codes D08W00 D08W01

Blank is off – image is shown Blank is on – black screen is shown

Returns00 – off 01 – on

Tint (Hue) Write Codes D14W00 to D14W14

Sets tint (hue) level to a value between 00 and 14 hex. This corresponds to 20 possible settings.

Returns00 to 14 hex

Contrast Write Codes D12W00 to D12W14

Set contrast level to a value between 00 and 14 hex. This corresponds to 20 possible settings.

Returns00 to 14 hex

A–3 3M 1997 3M Multimedia Projector MP8650

Show 8 more labels / short text on this page
Function Code Meaning · Read Codes D02R · Read Codes D04R · Read Codes D07R · Read Codes D13R · Read Codes D08R · Read Codes D14R · Read Codes D12R
Page 30 of the 3M MP8650 user manual — A–2. Serial Command Codes, continued
Page 30 · click to enlarge
Page 30

A–2. Serial Command Codes, continued

Attribute Memory Write Codes D10W00 D10W01 D10W02 D10W03 D11W00

Set to Default Set to Memory 1 Set to Memory 2 Set to Memory 3 Store current settings in current memory

Returns: 00 – Default 01 – Memory 1 02 – Memory 2 03 – Memory 3

Color (Saturation) Write Codes D15W00 to D15W14

Sets color (saturation) level to a value between 00 and 14 hex. This corresponds to 20 possible settings.

Returns00 to 14 hex

Sharpness Write Codes D16W00 to D16W03

Sets sharpness level to a value between 00 and 03 hex. This corresponds to 4 possible settings.

Returns00 to 03 hex

Gamma Correction Write Codes D17W00 to D17W14

Sets gamma level to a value between 00 and 14 hex. This corresponds to 20 possible settings.

Returns00 to 14 hex

Coring Write Codes D18W00 D18W01

Coring off Coring on

Returns00 – Coring is off 01 – Coring is on

P–Clock Write Codes D31Waaaa

The aaaa corresponds to the actual P–Clock number in hex. Returns: 4 digit P–Clock number in hex

Phase Write Codes D34W00 to D34W7F D35W00

Set phase to a value in the range of 00 to 7F hex. Reset phase to default

Returns00 to 7F

Timer Reset Write Codes D60W00

Reset the accumulated operating time to 0

Returns0000 to 9999 decimal value of operating hours

A–4 3M 1997 3M Multimedia Projector MP8650

Show 9 more labels / short text on this page
Function Code Meaning · Read Codes D10R · Read Codes D15R · Read Codes D16R · Read Codes D17R · Read Codes D18R · Read Codes D31R · Read Codes D34R · Read Codes D60R
Page 31 of the 3M MP8650 user manual — 1 RTS 1
Page 31 · click to enlarge
Page 31

A–2. Serial Command Codes, continued

Display Position Write Codes D36W00 to D36WFE

Change vertical display position (up/down) from reset position by 00 to FE. Change horizontal display position (left/right) from reset position by 00 to FE. Resets display position

D38W00

Read Codes D36R D37R

Returns00 to FE vertical position 00 to FE horizontal position

Language Selection (version 3 only)

Write Codes D52W00 D52W01 D52W02

Returns00 – English 01 – French 02 – Spanish

On–Screen Displays (version 3 only)

Write Codes D51W00 D51W01

Disable on–screen display Enable on–screen display

Returns00 – on–screen display is disabled 01 – on–screen display is enabled

DIN 8 (Projector ) DSUB 9 (Computer)

1 RTS 1

2 CTS 2 RD

3 TD 3 TD

4 GND 4

5 RD 5 GND

7 7 RTS

8 8 CTS

A–5 3M 1997 3M Multimedia Projector MP8650

Show 6 more labels / short text on this page
Function Code Meaning · D37W00 to D37WFE · English French Spanish · Read Codes D52R · Read Codes D51R · DIN8 Connector
Page 32 of the 3M MP8650 user manual — A–2. Serial Command Codes
Page 32 · click to enlarge
Page 32

A–6 3M 1997 3M Multimedia Projector MP8650

(Blank Page)

Ask about the 3M MP8650

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the 3M MP8650

Be the first to ask — other owners or our team will answer.

Original document

3M MP8650 manual PDF

32 pages·420 KB·Projector·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…