Instruction/ maintenance manual of the product GR2000 ELAN Home Systems
Go to page of 18
Hit achi Gigabit Router GR2000 Series Enhanced V ersion S-9181-31X Routing Software 06-02 (OS3) Inst allation Guide.
Routing Software 06-02 (OS3) Installation Guide ii S-9181-31X Statement on EN55022 Compliance WARNING : This is a Class A p roduct. In a domestic environment this prod uct may cause radio interference in which case the user may be required to take adequate measures.
S-9181-31X iii T rademarks Ethernet is a product name of Xero x Corp., USA. Ethernet is a trademark of Fuji Xerox Co., Ltd. MS-DOS® is a registered trad emark of Microsoft, Corp. UNIX is a registered t rademark, in the USA and othe r countries, licensed by X/Open Company Limited.
Routing Software 06-02 (OS3) Installation Guide iv S-9181-31X Change Record Preface This description explains methods used to install this version of the ro uting software in a new MC and to update the routing softwa re from an old version to this version.
S-9181-31X v Abbreviations AAL ATM Adaptation Layer ABR Available Bit Rate AFI Authority and Format Indicator AIS Alarm Indication Signal ANSI American National Standard s Institute ARP Address Resolu.
Routing Software 06-02 (OS3) Installation Guide vi S-9181-31X ERP Echo Response ERQ Echo Request ES End System FCS Frame Check Sequ ence FDB Filtering Data Base FDDI Fib er Distributed Data Interface .
S-9181-31X vii MMF Multi Mode Fiber MRU Maximum Receive Unit NSAP Network Service Access Point MTU Maximum Transfer Unit NBP Name Binding Protocol NCP Network Control Protocol NET Network Entity Title.
Routing Software 06-02 (OS3) Installation Guide viii S-9181-31X SD Start Delimiter SDH Synchronous Digital Hierarchy SDLC Se rvice Advertising Protocol SD-I Super Digital I interface SFD Start Frame D.
S-9181-31X ix T able of Content s 1 Update and Ins tallation Procedures ................ ................ ................ ................ ................ .......... ... ........ 1 1.1 Notes When Updating and In stalling ............ ............. .
Routing Software 06-02 (OS3) Installation Guide x S-9181-31X This page left intentionally blank.
S-9181-31X 1 1 Update and Installation Procedures 1.1 Notes When Updating and Installing 1. While installing, do not pull ou t and insert an MC card, and do no t turn off and on the GR2000. 2. Do not execute a ppupdat e command in the mu ltiple login condition.
Routing Software 06-02 (OS3) Installation Guide 2 S-9181-31X automatic rest art . If the connec tion is brok en, the ppupdate command does not terminate to fail in updating, and rest oration of the GR2000 may be disabled.
S-9181-31X 3 When the target of the update is S-9 181 -31X (ROUTE-OS3-X), Tab le 2-4 shows the available update versions, av ailable MC capacity, and execution of the up dating boot ROM on the CPU board.
Routing Software 06-02 (OS3) Installation Guide 4 S-9181-31X 2.1 Update Procedure 1 This is an update procedure for a GR2000 th at is configured from one RM using two MCs. It update s the backu p and current MC s, both with an old versio n of software stored in them.
S-9181-31X 5 2.2 Update Procedure 2 This update procedure is for a GR2000 configured fr om one RM using one MC. It updates the current MC card with an old vers ion of software stored in it. After the updating procedure for the current MC is complete, the GR2000 automatically restarts.
Routing Software 06-02 (OS3) Installation Guide 6 S-9181-31X 2.3 Update Procedure 3 This update procedure is for a GR2000 that is configured from two RMs, each using two MCs. It updates the backup and curren t MC cards, bot h with an old ver sion of software stored in them for individual RMs of the ac tive and standb y systems.
S-9181-31X 7 2.4 Update Procedure 4 This is a version-up procedure for a GR2000 that is configured from tw o RMs, each using one MC. It updates the current MC card with an old version of software stored in it for individual RMs of the active and standby systems.
Routing Software 06-02 (OS3) Installation Guide 8 S-9181-31X 3 Installing Software When installing this program product in a new MC64, do it by the procedure described below using a backup slot. Tabl e 3-1 lists the files used to install the software.
An important point after buying a device ELAN Home Systems GR2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ELAN Home Systems GR2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ELAN Home Systems GR2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ELAN Home Systems GR2000 you will learn all the available features of the product, as well as information on its operation. The information that you get ELAN Home Systems GR2000 will certainly help you make a decision on the purchase.
If you already are a holder of ELAN Home Systems GR2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ELAN Home Systems GR2000.
However, one of the most important roles played by the user manual is to help in solving problems with ELAN Home Systems GR2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ELAN Home Systems GR2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
