Instruction/ maintenance manual of the product S2410W Eizo
Go to page of 57
SAFETY SYMBOLS PRECAUTIONS 1. Introduction 1-1. Features 1-2. Package Contents 1-3. Controls & Connectors 2. CABLE CONNECTION 2-1. Before Connecting 2-2. Connecting the Signal Cable 2-3. Connecting Two PCs to the Monitor 3. ScreenManager 3-1. How to use the ScreenManager 3-2.
10. GLOSSARY APPENDIX About TCO'03 (Applicable white) About TCO'99 (Applicable black) FCC Declaration of Conformity Hinweis zur Ergonomie / Recycle Auskunft / Hinweise zur Auswahl des richti.
SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening.
As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has determined that this product meets the ENERGY STAR guidelines for energy efficiency..
PRECAUTIONS IMPORTANT! ● This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications.
Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately.
Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord.Not doing so may result in fire or electric shock. To disconnect the power cord, grasp the plug firmly and pull.
Never touch the plug and power cord if it begins to thunder. Touching them may result in electric shock. When attaching an arm stand, please refer to the user's manual of the arm stand and install the unit securely with the enclosed screws. Not doing so may cause the unit to come unattached, which may result in injury or equipment damage.
Do not block the ventilation slots on the cabinet. ● Do not place any objects on the ventilation slots. ● Do not install the unit in a closed space. ● Do not use the unit laid down or upside down. Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equipment damage.
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The screen may have defective pixels. These pixels may appear as slightly light or dark area on the screen.
1. Introduction Thank you very much for choosing an EIZO Color Monitor. 1-1. Features ● 24" wide format LCD ● Dual inputs compliant (DVI-I x 2) ● DVI Digital input ( TMDS ) compliant ● [H.
1-3. Controls & Connectors Front (1) ScreenManager® Monitor Adjustment menu (2) FineContrast Menu Directly touching the left or right button allows you to select a FineContrast mode. (3) Input Signal Selection Switch (SIGNAL) Switch the input signals when connecting 2 PCs.
(9) Stand (Detachable) The LCD monitor can be used with an optional arm stand by removing the stand ( See "6. ATTACHING AN ARM" ). (10) Security Lock Slot Allows for connection of a security cable. This lock supports Kensington's MicroSaver security system.
2. CABLE CONNECTION 2-1. Before Connecting Before connecting your monitor to the PC, change the display screen settings ( Resolution and frequency) in accordance with the charts below.
162 MHz (Max) 720×400 70Hz VGA TEXT 800×600 60Hz VESA 1024×768 60Hz VESA 1280×960 60Hz VESA 1280×1024 60Hz VESA 1600×1200 60Hz VESA 1680×1050 60Hz VESA CVT, VESA CVT RB (Reduced Blanking) 1920×1200 60Hz VESA CVT RB (Reduced Blanking) 2-2. Connecting the Signal Cable ● Be sure that the power switches of both the PC and the monitor are OFF.
Signal Cable (FD-C16 enclosed) Video Output Connector / D-Sub mini 15 pin Input Connector (monitor) / D-Sub mini 15 pin ● Standard graphics card ● Power Macintosh G3 (Blue & White) / Power Mac.
4. Lead the power cord and signal cable into the cable holder at rear of the monitor. ● The cables are recommended to lead with slight sag for the smooth motion of the stand and the Portrait/ Landscape display. 5. Adjust the "height", "front and back position" and "angle" of the monitor.
(3) If necessary, fine adjust the height of the monitor. 6. Turn on the monitor's Power switch and then turn on the PC's power. The monitor's power indicator will light up (blue). If an image does not appear, refer to the "7. TROUBLESHOOTING" for advice.
2-3. Connecting Two PCs to the Monitor Two PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pin connector on the back of the monitor. Connecting Examples SIGNAL 1 SIGNAL 2 (Ex.1) Analog D-Sub mini 15 pin Signal Cable (FD-C16 enclosed) Signal Cable (FD-C39 enclosed) DVI Digital (Ex.
This function is used to select which PC will have priority to control the monitor when utilizing two PCs. The monitor constantly checks the input signals and switches automatically in accordance with the "Input Priority" setting (see table below).
3. ScreenManager 3-1. How to use the ScreenManager ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily. ● Main Menu and FineContrast Menu cannot be activated at the same time. 1. Entering the ScreenManager Touch the Enter switch once to display the main menu of the ScreenManager.
FineContrast Menu Directly touching the left or right switch allows you to select the best suited mode for screen display from 5 FineContrast modes; Custom, Movie, Picture, Text and sRGB.
Menu Settings Menu Off Timer Set the menu displaying time. Translucent Set the transparency of the background. Power Indicator Make non-light for blue lighting when the screen is displayed. ( Power Indicator Setting.) Reset Return to the factory Default settings.
Custom To adjust the color settings according to your preference Movie Animated images Picture Photo or picture image Text Text on word processor or spreadsheet software sRGB To display the screen images based on those original colors (ex.
[Procedure] 1. Select <Off Timer> in the ScreenManager <Others> menu. 2. Select "Enable" and touch the Right and Left switches to adjust the "On Period" (1 to 23 hours). [Off Timer System] PC Monitor Power Indicator On Period (1H - 23H) Operation Blue Last 15 min.
4. ADJUSTMENT 4-1. Screen Adjustment ● Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments. The monitor displays the digital input image correctly based on its pre-setting data.
pattern to that as shown in the diagram on the following. 3. Adjust by using <Screen> menu in the ScreenManager. (1) Vertical bars appear on the screen → Use the < Clock > adjustment. Select the <Clock> and eliminate the vertical bars by using the Right and Left of the Directing switches.
pixels are fixed. The <Position> adjustment moves the image to the correct position. Select <Position> and adjust the position by using the Up, Down, Right and Left switches.
4-2. Displaying Lower Resolutions The lower resolutions are enlarged to full screen automatically. Using the <Screen Size> function in the <Others> menu enables to change the screen size. 1. Enlarge the screen size when displaying a low resolution.
→ Set the <Border Intensity>. In the <Enlarge> mode or <Full Screen> mode, the outer area (border) is usually black. Select <Border Intensity> in the <Others> menu and adjust by using the right and left switches.
● Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments. (Allow the monitor to warm up for at least 20 minutes before making adjustments.) ● Performing the <Reset> of the <Color> menu returns the color settings of the selected mode to the default settings.
● Using <Hue> adjustment may not obtain proper tone reproduction. Gain To change each color (red, green and blue) 0 ~ 100% By adjusting the red, green and blue color tones for each mode, custom colors can be defined. Display a white or gray background image and adjust the <Gain>.
Operation Operation Blue Power saving STAND-BY SUSPEND OFF Power saving Yellow [Power Resumption Procedure] Operate the mouse or keyboard to return to a normal screen. Digital Input This monitor complies with the "DVI DMPM" [Procedure] 1. Set the PC's power saving settings.
5. MAKING USE OF USB (Universal Serial Bus) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected.
Connecting Examples ScreenManager Pro for LCD (for Windows) For further details about the "ScreenManager Pro for LCD (for Windows)", refer to the EIZO LCD Utility Disk.
6. ATTACHING AN ARM The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the LCD monitor. ● If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers before selecting.
.
7. TROUBLESHOOTING If a problem persists even after applying the suggested remedies, contact an EIZO dealer. ● No picture problems → See No.1 ~ No.2 ● Imaging problems → See No.3 ~ No.14 ● Other problems → See No.15 ~ No.19 ● USB problems → See No.
3. Display position is incorrect. ● Adjust the image position using the < Position > . ● If the problem persists, use the graphics board's utility software to change the display position if available. 4. Screen image is smaller or larger than the actual screen images.
12. The screen has defective pixels (e.g. slightly light or dark). ● This is due to the characteristics of the panel itself, and not the LCD product. 13. Fingerprints remain on the screen. ● Leaving the screen white may solve the problem. 14. The noise appears on the screen.
20. PC is hung up. / The peripherals connected to the downstream ports do not operate. ● Check that the USB cable is correctly connected. ● Check the downstream ports by connecting the peripherals to other downstream ports. If the problem is solved by doing this, contact an EIZO dealer.
8. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. ● Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel.
9. SPECIFICATIONS LCD Panel 61 cm (24.1 inch), TFT color LCD panel with Anti-Glare, Viewing Angle: Horizontal: 178°, Vertical: 178° CR ≥ 10 Dot Pitch 0.
Temperature Operating: 0°C ~ 35°C (32°F ~ 95°F) Storage: -20°C ~ 60°C (-4°F ~ 140°F) Humidity 30% to 80% R.H. Non-condensing USB standard Rev. 2.0 complied self-powered hub USB port Upstream port x 1 Downstream port x 2 Communication Speed 480 Mbps (high), 12 Mbps (full), 1.
4 short beeps Monitor not connected correctly. PC turned off. Monitor received unsupported signal frequency. 2 short beeps every 15 sec. Monitor is in the advance notice mode of the Off Timer.
Pin No. Signal Signal Pin No. Signal 1 TMDS Data2- 11 TMDS Data1/3 Shield 21 NC 2 TMDS Data2+ 12 NC 22 TMDS Clock shield 3 TMDS Data2/4 Shield 13 NC 23 TMDS Clock+ 4 NC* 14 +5V Power 24 TMDS Clock- 5 .
10. GLOSSARY Clock With the analog input signal display, the analog signal is converted to a digital signal by the LCD circuitry. To convert the signal correctly, the LCD monitor needs to produce the same number clock pulse as the dot clock of the graphics system.
The LCD panel consists of a fixed number of pixel elements which are illuminated to form the screen image. This model display panel consists of 1920 horizontal pixels and 1200 vertical pixels. At a resolution of 1920 x 1200, all pixels are displayed as a full screen.
APPENDIX/ANHANG/ANNEXE Preset Timing Chart for Analog input Timing-Übersichten für Analog Eingang Synchronisation des Signaux pour Analog numerique Based on the signal diagram shown below 30 factory presets have been registered in the monitor's microprocessor.
VESA 800 × 600 @ 60 Hz 40.0 Posi. Posi. 37.88 60.32 VESA 800 × 600 @ 72 Hz 50.0 Posi. Posi. 48.08 72.19 VESA 800 × 600 @ 75 Hz 49.5 Posi. Posi. 46.88 75.00 VESA 800 × 600 @ 85 Hz 56.3 Posi. Posi. 53.67 85.06 VESA 1024 × 768 @ 60 Hz 65.0 Nega. Nega.
[Applicable to white cabinet version only.] Congratulations! The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
[Applicable to black cabinet version only.] Congratulations! You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use.
Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http://www.
The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the manufacture and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on earth of ultraviolet light with e.
.
Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach ISO13406-2 mit dem Videosignal, 1920 Punkte ≥ 1200 Zeilen, RGB analog, 0,7 Vp-p und mindestens 60,0 Hz Bildwiederholfrequenz, non interlaced.
Recycle Auskunft Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem Partner eds-r gmbh rucknahmesysteme. Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden.
An important point after buying a device Eizo S2410W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eizo S2410W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eizo S2410W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eizo S2410W you will learn all the available features of the product, as well as information on its operation. The information that you get Eizo S2410W will certainly help you make a decision on the purchase.
If you already are a holder of Eizo S2410W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eizo S2410W.
However, one of the most important roles played by the user manual is to help in solving problems with Eizo S2410W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eizo S2410W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
