Instruction/ maintenance manual of the product S2401W Eizo
Go to page of 39
User’ s Manual Color LCD Monitor.
English 2 SAFETY SYMBOLS This manual u ses the safety symb ols below . They denote critical information. Please read them carefully . Copyright© 2005 EIZO NANAO CORPORA TION A ll rights reserved.
English TABLE OF CONTENTS 3 T ABLE OF CONTENT S PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. INTRODUCTI ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
English 4 PRECAUTIONS PRECA UTIONS IMPOR T ANT! z This product has been ad just ed specifically for use in th e region to wh ich it was originally shipped . If operated ou tside the region to wh ich it was original ly shipped, th e product may no t perform as stated in the specificat ions.
English PRECAUTIONS 5 WA R N I N G Keep small objects or liqui ds awa y from the unit. Small objects acci dentally fallin g through th e ventilation slot s into the cabinet or spillage into the ca binet may result in fire, electric shock, or equipm ent damag e.
English 6 PRECAUTIONS WA R N I N G The equipment must be connected to a gr ounded main outlet. Not doing so may cause in fire or electric shock. Use the correct v oltage.
English PRECAUTIONS 7 CA UTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord at tached is dangerous. It may result in injury . When handling t he unit, g rip the bott om of the unit firml y with both hands ensuring the pa nel faces outwar d bef ore lifting.
English 8 PRECAUTIONS LCD P anel In order to su ppress the lumi nosity change by lo ng-term use and to maintain the st able luminosity , use of a monit or in lower brightness is recommended. The screen may have defective pixe ls. These pi xels may appear as slightly light or dark area on the screen.
English 1. INTROD UCTION 9 1. INTR ODUCTION Thank you very much for choo sing an EIZO Colo r Monitor . 1-1. Features z [Horizontal s canning frequency] 24.8 - 80 kHz [V ertical scanning frequency] 50.0 - 75.1 Hz [Resolutio n] 1280 dots x 102 4 lines z Auto Screen Adjustment f unction incorporat ed (p.
English 10 1. INTROD UCTION 1-3. Contr ols & Connector s Fr ont (1) ScreenManager ® (2) Sensor* 1 (3) Control Button (Left)* 2 (4) Enter Button (5) Control Button (Right)* 2 (6) P ower Button (7) P ower Indicator* 3 *1 When using the BrightRegula tor function, the sensor detects the surroundin g brightness, see pa ge 19.
English 1. INTRODUCTION 11 Rear (8) P ower Connector (9) D-Sub mini 15 pin Input Connector (10) 4 Holes for Mounting an Arm-Stand* 4 (11) Secur ity Lock Slot* 5 (12) Stand *4 The LCD monitor can be used with an optional arm stand by removing the stand, see page 22.
English 12 2. CABLE CONNECTION 2. CABLE CONNECTION 2-1. Bef ore Connecting Before connecting your monitor to the PC , change the display screen settings (resolution (p .
English 2. CABLE CONNECTION 13 2-2. Connecting the Signal Cable NOTE z Be sure that the po we r s witches of both the PC and the monitor ar e OFF . 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cabl e into the video connector on the PC.
English 14 2. CABLE CONNECTION 2. Plug the power cor d into the power con nector on the rear of the monitor . Then, plug the other end of the cor d into a po wer outlet. W ARNING Use the enc losed power cord and connect t o the standar d powe r outlet of y our count ry .
English 3. SCREENMANAGER 15 3. SCREENMANAGER 3-1. How to use the ScreenMana ger 1. Entering the ScreenMana ger Press the Enter Button once to display the main menu of the ScreenManager . 2. Making Adjustments and Setti ngs (1) Select the desired sub menu icon us ing the Control buttons and press the Enter button.
English 16 3. SCREENMANAGER 3-2. ScreenManager Adjustments and Settings The following table shows all the Screen Manager’ s adjustment and setting menus. *1 Due to the inspection on the factory, the usage time may not “0 hour” at shipping. Main me nu Sub menu Reference Au t o Adjustment Screen Screen 4-1.
English 3. SCREENMANAGER 17 3-3. Useful Functions Adjustment Lock Use the “Adjustment Lock ” function to pr event any accidental changes. [T o loc k] (1) Switch off the mon itor’ s Power by the po wer button. (2) Press on the Enter but ton while switchin g on the monitor’ s power .
English 18 4. ADJUSTMENT 4. ADJUSTMENT 4-1. A uto Screen Adjustment Screen flickerin g is suppressed and the proper pos ition is ad justed automatically in the following ca ses. z When the monitor is inp ut the input signal f rom the computer t hat has ne v er been connected the monitor .
English 4. ADJUSTMENT 19 4-3. Brightness Adjustment BrightRegulator Function BrightRegulator function adjust s the brightness of the screen automati cally depending on the surrounding bri ghtness.
English 20 4. ADJUSTMENT 4-4. Color Adjustment The <Color> menu in the ScreenMana ger enab les to change the color of the screen. By using the <Color Mode>, the adjustment mode can be selected from <Custom mode> (to adjust the color settings accordin g to your preference) and <s RGB> (p.
English 4. ADJUSTMENT 21 4-5. P ower -save Setup NOTE z Do yo ur par t to conserve ener g y , turn off the monitor when y ou are finished using it. Disconnecting th e monitor from th e pow er supply is recommende d to sa v e energ y complete ly . This monitor comp lies with the “VESA DPMS” (p.
English 22 5. ATTACHING AN ARM STAND 5. A TT A CHING AN ARM ST AND The LCD monitor can be used wit h an optional arm stand. Using our opti onal arm or stand is recommend ed. (Ask your local dealer for information.) NOTE z If you will use the arm or s tand of other manuf acturers, confirm the follo wings to the manuf acturers before selecting.
English 5. ATTACHING AN ARM STAND 23 4. Attach an arm stand to the LCD monitor securel y . Attach the remov ed stand co ver again to the mo nitor . Arm-stand 4 Mounting Screws : M4 x 12 mm.
English 24 6. TROUBLESHOOTING 6. TR OUBLESHOO TING If a problem persists even after applying the suggested remedies, contact an EIZO dealer . z No picture problems → See No.1 ~ No.2 z Imaging problems → See No.3 ~ No.8 z Other problems → See No.
English 6. TROUBLESHOOTING 25 4. The screen is too bright or too dark. Adjust the <Brightness> (p . 20) (The bac klight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker , please contact your dealer .
English 26 7. CLEANING 7. CLEANING Periodic cleaning is recommended to keep the monitor looking n ew and to prolong its operation lifeti me. NOTE z Ne v er use thinner , benzene , alcohol (et h anol, methan ol, or isoprop yl alcohol) , abrasiv e cleaner s, or othe r strong solv ents , as these ma y cause damage t o the cabinet or LCD panel.
English 8. SPECIFICATIONS 27 8. SPECIFICA TIONS *1 Gray Version *2 Black Version LCD P anel 43.2 cm (17.0 inch), TFT color LCD panel wi th Anti-Glare Hard Coating Viewing Angle: H: 170°, V: 155° (CR ≥ 5) Dot Pitch 0.264 mm Horizontal Scan F requency 24.
English 28 8. SPECIFICATIONS Default settings Dimensions Brightness 100% Color Color Mode Custom T emperature Off (Nor mal white ; approx. 6500K) Gain 100% Off Timer Disab le Menu P o sition Center BrightRegulator E nable Language English 1(0.
English 8. SPECIFICATIONS 29 Pin Assignment D-Sub mini 15 pin connect or Pin No. Signal Pin No. Signal Pin No. Signal 1 Red video 6 Red ground 11 Ground Shor ted 2 Green video 7 Green g round 12 Data (SD A) 3 Blue video 8 Blue ground 13 H. Sync 4 Ground 9 No pin 14 V .
English 30 9. GLOSSARY 9. GLOSSAR Y Cloc k With th e analog input signal di splay , the analog signal is conv erted to a digital signal by the LCD circuitry . T o convert the signal correctly , the LCD monitor needs to produce the same number clock pulse as the dot clock of the graphics system.
English 9. GLOSSARY 31 sRGB (Standard RGB) “International Standard f or Red, Green, and Blue color space” A color space was defined with the aim of the color matchi ng between applicatio ns and hardw are devices, such as moni tors, sc anners, printers and digital cameras.
I APPENDIX/ANHANG/ANNEXE APPENDIX/ANHANG/ANNEXE Preset Timing Char t Timing-Übersic hten Synchr onisation des Signaux Based on the signal diagram shown below 19 factory pres ets have been registered in the monitor’ s microprocessor .
APPENDIX/ANHANG/ANNEXE II VESA 1024 × 768 @7 0 Hz 75.000 56.48 70.07 Nega. Nega. VESA 1024 × 768 @7 5 Hz 78.750 60.02 75.03 P osi. P osi. VESA 1152 × 864 @7 5 Hz 108.000 67.50 75.00 P osi. P osi. VESA 1280 × 960 @6 0 Hz 108.000 60.00 60.00 P osi. P osi.
[Applicable to gray cabinet version.] Congratulations! The displa y you ha v e just purchased carries the TCO’03 Displa ys label. This means that your displa y is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
[Applicable to black cabinet version only] Congratulatio ns! Y ou have just purchased a TCO’99 approved and labelled product! Y our choice has provided you with a product developed for professional use.
En vir onmental Requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardan t substances.
For U.S.A, Canada, etc. (rated 100-120 V ac) Only FCC Declaration of Conformity W e, the Responsibl e Party EIZO NANAO TECHNOLOGIES INC. 5710 W arland Drive, Cypress, CA 90630 Phone: (562) 43 1-5011 declare that the product T rade name: EIZO Model: FlexScan P1 700 is in conformity with Part 15 of the FCC Rules.
Hinweise zur A us wahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirm arbeitsplätze vorgesehen. W enn nicht der zum Standardzubehör gehörige Sch wenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden.
Recycle Auskunft Die Rucknahme dieses Produktes n ach Nutzungsende ubernimmt EIZO in Deuts chland zusammen mit dem Partner eds-r gmbh rucknahm esysteme. Dort werden die Gerate in ihre Bestandteile zerlegt, die dann der Wieder verwertung zugefuhrt werden.
An important point after buying a device Eizo S2401W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eizo S2401W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eizo S2401W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eizo S2401W you will learn all the available features of the product, as well as information on its operation. The information that you get Eizo S2401W will certainly help you make a decision on the purchase.
If you already are a holder of Eizo S2401W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eizo S2401W.
However, one of the most important roles played by the user manual is to help in solving problems with Eizo S2401W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eizo S2401W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
