Instruction/ maintenance manual of the product L665 Eizo
Go to page of 45
User’ s Manual Color LCD Monitor.
English 2 SAFETY SYMBOLS This manual uses the safety symbols below . They denote critical information. Please read them carefully . W ARNING Failure to abide by the information in a W ARNING may result in serious injury and can be life threatening.
English T ABLE OF CONTENTS 3 T ABLE OF CONTENTS PRECA UTIONS ................................................................................... 4 1. INTRODUCTION ..................................................................................... 9 1-1.
English 4 PRECA UTIONS PRECA UTIONS IMPOR T ANT! • This product has been adjusted specifically f or use in the region to which it w as originally shipped. If operated outside the region to which it was originally shipped, the product ma y not perf orm as stated in the specifications.
English PRECA UTIONS 5 W ARNING Keep small objects or liquids a way fr om the uni t. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage.
English 6 PRECA UTIONS W ARNING The equipment must be connected to a gr ounded main outlet. Not doing so may result in fire or electric shock. Use the correct v oltage. * Do not overload your power circuit, as this may result in fire or electric shock.
English PRECA UTIONS 7 CA UTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous.
English 8 PRECA UTIONS LCD P a nel In order to suppress the luminosity change by long-term use and to maintain the stable luminosity , use of a monitor in lower brightness is recommended. The screen may have defective pixels. These pixels may appear as slightly light or dark area on the screen.
English 1. INTRODUCTION 9 1. INTR ODUCTION Thank you very much for choosing an EIZO Color Monitor . 1-1. Features • Dual inputs compliant • DVI (p.36) Digital input (TMDS (p.37)) compliant. • Horizontal scanning frequency: 24.8 - 80 kHz (Digital input: 31.
English 10 1. INTRODUCTION 1-3. Controls & Connector s Fr ont S I G . S I G . AUTO AUTO ENT. ENT. (4) (5) (6) (7) (8) (9) (3) (1) (2) SIG. AUT O ENT .
English 1. INTRODUCTION 11 Rear (11) (10) (12) (13) (14) (15) (16) (10) D VI-D Input Connector (Signal 1) (11) D-Sub mini 15 pin Input Connector (Signal 2) (12) External line in (stereo mini-jack) (13.
English 12 2. CABLE CONNECTION 2. CABLE CONNECTION 2-1. Before connecting Before connecting your monitor to the PC, change the display screen settings (resolution (p.
English 2. CABLE CONNECTION 13 2-2. Connecting the signal cable NO TE • Be sure that the powe r s witches of both the PC and the monitor are OFF . 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC.
English 14 2. CABLE CONNECTION 2. Plug the power cord into the power connector on the rear of the monitor . Then, plug the other end of the cord into a power outlet. W ARNING Use the enclosed po wer cor d and connect to the standard power outlet of y our country .
English 2. CABLE CONNECTION 15 2-3. Sound Connections NO TE • Alwa ys switch the monitor and audio de vice s or computers off whene ver connecting or disconnecting any audio de vices (compu ter or CD pla y er) to the monitor . • Use the enclosed stereo mini-jack cab le f o r connecting audio de vices or computers to the monitor .
English 16 3. ScreenManager 3. ScreenMana g er 3-1. How to use the ScreenManager S I G . S I G . AUTO AUTO ENT. ENT. SIG. AUTO ENT. 1. Entering the ScreenManager Push the Enter button once to display the main menu of the ScreenManager . [Main Menu ] 2.
English 3. ScreenManager 17 3-2. Adjustments and Settings The following table shows all the Screen Manager’ s adjustment and setting menus. “*” indicates adjustments of analog input only and “**” indicates digital input only . Main menu Sub menu Reference Clock * Phase * Po s i t i o n * Smoothing Screen Contrast /Brightness 4-1.
English 18 3. ScreenManager 3-3. Useful Functions Adjustment Loc k Use the “Adjustment Lock” function to prevent any accidental changes. Lock ed function • A uto adjustment button adjustments and settings in the ScreenManager . Unlock ed function • Adjustment of contrast and brightness by the control b uttons .
English 3. ScreenManager 19 EIZO Logo disappearing function When switching on the power button on the front panel, the EIZO logo is displyed for a while.
English 20 4. ADJUSTMENT 4. ADJUSTMENT The monitor displays the digital input ima ge correctly based on its pre-setting data. Adjust the contrast and brightness (p.22). 4-1. Screen A djustment Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position.
English 4. ADJUSTMENT 21 3. Adjust by using <Screen> menu in the ScreenManager . (1) V ertical bars appear on the screen → Use the <Clock> (p.36) adjustment. Select the <Clock> and eliminate the vertical bars by using the right and left of the control buttons.
English 22 4. ADJUSTMENT 4. T o adjust the output signal range (Dynamic Range) of the signal. → Use the <Range Adjustment> (p.37) of <ColorManagerment> menu. This controls the level of output signal range to display the whole color gradation (256 colors).
English 4. ADJUSTMENT 23 4-2. Displaying a lo w resolutions The lower resolutions are enlarged to full sc reen automatically . Using the <Screen Size> function in the <Others> menu enables to change the screen size. 1. Enlarge the screen size when displaying a low resolution.
English 24 4. ADJUSTMENT 3. Set the brightness of the black area surrounding the displayed image. → Set the <Border Intensity>. In the <Enlarge> mode or <Full Screen> m ode, the outer area (border) is usually black. Select <Border Intensity> in the <Others> menu and adjust by using the right and left buttons.
English 4. ADJUSTMENT 25 4-3. Color Adjustment The <ColorManagement> menu in the ScreenManager enables to change the color of the screen. By using the <Color Mode>, th e adjustment mode can be selected from <Custom mode> (to adjust the color settings according to your preference) and <sRGB> mode.
English 26 4. ADJUSTMENT NO TE • The “Hue” adjustment may cause undispla y ab le color tone. T o change each color (red, green and blue). → Use the <Gain> (p.36) adjustment. By adjusting the red, green and blue colo r tones for each mode, custom colors can be defined.
English 4. ADJUSTMENT 27 4-4. P ower -save Setup The <PowerManager> menu in the ScreenManager enables to set the power -save setup. NO TE • Do your part to conser ve energy , turn off the monitor when y ou are finished using it. Disconnecting the monitor from the power supply is recommended to sa ve energy completely .
English 28 4. ADJUSTMENT P ower sa ve f or speaker When the monitor is in the power -saving mode, sound of speaker also erases simultaneously can be performed. [Procedure] (1) Set the PC’ s power saving settings. (2) Select <Sound>. (3) Select “Disable”.
English 5. A TT A CHING AN ARM ST AND 29 5. A TT A CHING AN ARM ST AND The LCD monitor can be used with an ar m stand by removing the tilt stand and attaching the arm stand to the LCD monitor . NO TE • Use an arm stand that satisfies the followings .
English 30 6. TROUBLESHOO TING 6. TR OUBLESHOO TING If a problem persists even after applying the suggested remedies, contact an EIZO dealer . • No picture problems : See No.1 ~ No.2 • Imaging problems : See No.3 ~ No.11 • Other problems : See No.
English 6. TROUBLESHOO TING 31 Prob lems P oints to c heck with possib le solutions 3. Display position is incorrect. ! Adjust the image position using the <Position> (p.21) ! The two display modes, VGA 720 x 400 (70 Hz) and 320 x 200 (70 Hz), have the same signal timings.
English 32 6. TROUBLESHOO TING Prob lems P oints to c heck with possib le solutions 10. Fingerprints remain on the screen. ! Leaving the screen white may solve the problem. 11. The <Smoothing> cannot be selected. ! <Smoothing> is disabled when the screen is displayed in the 1280 x 1024.
English 7. CLEANING 33 7. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NO TE • Ne v er use thinner , benzene, alcohol (et hanol, methanol, or isoprop yl alcohol), abrasiv e cleaners , or other strong solv ents, as these ma y cause damage to the cabinet or LCD panel.
English 34 8. SPECIFICA TIONS 8. SPECIFICA TIONS LCD P anel 46 cm (18.1 inch), TFT color LCD panel with Anti-Glare Hard Coating, Vie wing A ngle: Hor izontal: 170 ° , V er tical: 170 ° Image F ormation Time: approx. 78 ms Dot Pitch 0.280 mm Horizontal Scan F requency 24.
English 8. SPECIFICA TIONS 35 Default settings Analog input Digital input Contrast 100% Brightness 100% Smoothing 3 Color Management Custom mode / O ff (Normal white) P owerManager VESA DPMS D VI DMPM.
English 36 9. GLOSSAR Y 9. GLOSSAR Y Afterimage The Afterimage is particular to LCD monitors when the monitor screen is left on for a long period without use.
English 9. GLOSSAR Y 37 Phase The phase adjustment decides the sampling timing point for converting the analog input signal to a digital signal. Adjusting the phase after the clock adjustment will produce a clear screen. Range Adjustment The Range Adjustment controls the level of output signal range to display the whole color gradation.
English 38 MEMO MEMO.
APPENDIX/ANHANG/ANNEXE i APPENDIX/ANHANG/ANNEXE Preset Timing Char t for An alog input Timing-Über sichten für An alog Eingang Synchr onisation des Signaux pour Analog n umerique Based on the signal diagram shown below 23 fact ory presets have been registered in the monitor's microprocessor .
ii APPENDIX/ANHANG/ANNEXE Dot Clock MHz Sync Polarity Frequencies A: Fr ont P or ch B: Sync P eriod Mode H V H kHz V Hz H µs/Dot V ms/Line H µs/ Dot V ms/ Line VGA 640 × 480 25.175 Nega. Nega. 31.469 59.940 0.318/ 8 0.064/ 2 3.813/ 96 0.054/ 2 VGA 720 × 400 28.
APPENDIX/ANHANG/ANNEXE iii C: Bac k P or ch D: Blanking Period E: Displa y P eriod F: T otal Cycle H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line 1.589/ 40 0.794/ 25 5.720/ 144 0.922/ 29 25.442/ 640 15.253/ 480 31.
[Applicable to gray (standard color version only).] Congratulations! Y ou have just purchased a TCO’99 approved and labelled product! Y our choice has provided you with a product developed for professional use.
Environmental Requirements Flame retardants Flame retardants are present in printed circui t boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retard ant substances.
For U.S.A, Canada, etc. (rated 100-120 V ac) Only FCC Declaration of Conformity W e, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 W arland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product T rade name: EIZO Model: FlexScan L665 is in conformity with Part 15 of the FCC Rules.
Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB 2000 mit dem V ideosignal, 1280 Punkte × 1024 Zeilen, RGB an alog, 0,7 Vp-p und mindestens 75,0 Hz Bildwiederholfrequenz, non interlaced.
An important point after buying a device Eizo L665 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eizo L665 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eizo L665 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eizo L665 you will learn all the available features of the product, as well as information on its operation. The information that you get Eizo L665 will certainly help you make a decision on the purchase.
If you already are a holder of Eizo L665, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eizo L665.
However, one of the most important roles played by the user manual is to help in solving problems with Eizo L665. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eizo L665 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
