Instruction/ maintenance manual of the product FlexScan T966 Eizo
Go to page of 39
F l ex S c an ‚ User’ s Man ual Im po r tant Please read this User's Manual carefully to familiarize yourself with safe and effective usage procedures.
English 2 SAFETY SYMBOLS This manual uses the safety symbols bel ow . They denote critical information. Please read them carefully . W ARNING Failure to abide b y the information in a W ARNING ma y result in serious in j ur y and can be life threatening.
English T ABLE OF CONTE NTS 3 T ABLE OF CONTENTS PRECA UTIONS ...................................................................................... 4 1. INTRODUCTION ....................................................................................
English 4 PRECA UTIONS PRECA UTIONS IMPOR T ANT! • This product has been a djusted specifically f or use in the region to which it was originally shipped. If operated outside th e region to which it w as originally shipped, the product ma y not perform as stated in the specifications.
English PRECA UTIONS 5 WA R N I N G Keep small objects or liquids a way fr om the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage.
English 6 PRECA UTIONS WA R N I N G The equipment m ust be connected to a ground ed main outlet. Not doing so may result in fire or electric shock. Use the correct v oltage.
English PRECA UTIONS 7 CA UTION Handle with care when carrying the unit. Disconnect the power cord and cables and remo ve the optional unit. Moving the unit with the cord or the option attached is dangerous. It may re sult in injury . Do not move it alone.
English 8 1. INTRODUCTIO N 1. INTR ODUCTION Thank you very muc h for choosing an EIZO Color Display Monitor . 1-1. Features • Horizontal scanning frequency o f 30-130kHz V ertical scanning frequency of 50-160 Hz • Support to sRGB stand ard (See page 34.
English 1. INTRODUCTIO N 9 1-3. Controls & Connector s Fr ont Rear (1) USB P or t *1 with a drop down acce ss lid; Downstream x 1 (2) BNC/D-SUB Selection Button (3) A UT O/FINE MODE button Push th.
English 10 2. INST ALLA TION 2. INST ALLA TION 2-1. Connecting the monitor to the PC NO TE • Be sure that the pow er s w itches of both of the PC and the monitor are OFF . 1. Plug the signal cable into the c onnector at the rear o f the monitor and the other end of the cable in to the video connector on the PC.
English 2. INST ALLA TION 11 WA R N I N G Use the enc losed po wer cor d and connect to th e standar d power outlet of y our countr y . Be sure to remain within the rated v oltage of the po wer cord. Be sure to remain within the rated voltage of the power cord.
English 12 2. INST ALLA TION 2-2. Getting Ready f or Operation T ry each setting procedure if n ecessary in the following cases. The displa y image size and/or position is not appropriate. → Press the AUTO/FINE MODE button on the front panel for more than 2 seconds.
English 3. SCREEN A DJUSTMENT 13 3. SCREEN ADJUSTMENT NO TE • Allow the monitor to stabili ze f or at least 30 minutes bef ore making image adjustments. 3-1. How to use the ScreenMana ger Use the control pad on the front panel. The control pa d can be pressed in 5 directions, Enter , Up, Down, Left and Right.
English 14 3. SCREEN ADJUSTMENT Adjustments and Settings Main Menu Sub menu Adjustments and Settings See page Contrast - Screen contr ast and bri ghtness - Size - Screen Size - P osition - Screen position - Side Pin. Side pin balance - T rapezoidal Distor tion - Til t Inclination - Uniformity Uniformity (p .
English 3. SCREEN A DJUSTMENT 15 3-2. Fine Contrast The fine contrast modes differ in brightness and contrast set tings. S ele ct the mode that is the best suited to the applicatio n in use. The mode can be changed with the AUTO/FINE MODE button that is on the front of the monitor .
English 16 3. SCREEN ADJUSTMENT 3-3. Color By using the <Color Mode> in the <Color > me nu, the adjustment mode can be selected from standard mode (to set the color te mperature and the color restor ation), custom mode (to adjust each color tone, (Red, Gr een and Blue) and sRGB mode.
English 3. SCREEN A DJUSTMENT 17 T o restore the changed brightness and the color caused by long use to close to those original ones. → Execute the <Color Restoration>. The changed brightness and the color caus ed by long use can be corrected and restored to close to those factory default settin gs.
English 18 3. SCREEN ADJUSTMENT 3-4. P o wer Save There are two power save settings. Choose the setting which matches your environment. Set the power saving by using <O thers> menu. NO TE • Do your pa r t to conser ve energy , tur n off the monitor whe n you a re finished using it.
English 3. SCREEN A DJUSTMENT 19 T o use the Monitor's off timer system → Select “On” in the <Off T imer> menu. Witho ut the PC's power saving sys tem, the off timer allows the moni tor to enter a power save mode after a predetermine d amount of time has lapse d.
English 20 3. SCREEN ADJUSTMENT 3-6. Connecting two PCs to the Monitor T wo PCs can be connected to the monitor through the BNC/D -Sub input connections on the rear of the monitor . (Example) Selecting the Active input Every time the BNC/D-Sub selection button is pressed, the inpu t changes in order .
English 4. MAKING USE OF USB (Unive rsal Serial Bus) 21 4. MAKING USE OF USB (Univer sal Serial Bus) This monitor provides a hub which supports the USB s tandard. When connecting to a USB compliant PC or another hub, the m onitor functions as a hub to which the USB compliant peripherals ca n be easily connected.
English 22 4. MAKING USE OF USB (Universal Serial Bus) 3. After setting up, the monitor’ s US B hub is available for connecting USB compliant peripherals to the downstream ports of the monitor . Connecting Examples The software in the EIZO CR T Utility Disk For information on the software, refer to the readme.
English 5. TROUBLE SHOO TING 23 5. TR OUBLESHOO TING If a problem persists even after applying the sugges ted remedies, contact an EIZO dealer . *The bracket < > indicates the func tion of ScreenManager Prob lems P oints to check wi th possible solutions 1.
English 24 5. TR OUBLESHOO TING Prob lems P oints to check wi th possible solutions 3. The image vibrates on the screen. Check that the signal cable is correctly connected to the PC or graphics boar d. The monitor may be located close to a device that is generat ing a magnetic field.
English 5. TROUBLE SHOO TING 25 Prob lems P oints to check wi th possible solutions 6. The character s and images have a slight shadow on their right side. Change the mode of <Signal Filter 1>. Change the refresh rate. Refer to the PC and graphics card manual for information.
English 26 5. TR OUBLESHOO TING Prob lems P oints to check wi th possible solutions 9. Color is abnormal. • The entire screen appears bluish or reddish. • Color purity is not uniform. • Misconvergence of colors (red, green, blue) When the monitor is not fully warmed up, the screen may look slightly colored, e.
English 5. TROUBLE SHOO TING 27 Prob lems P oints to check wi th possible solutions 14. T wo horizontal hairlines are visib le on the screen. These are damper wires. Damper wires are used to support the CR T's aperture grille, and are visible as thin dark lines across the screen.
English 28 5. TR OUBLESHOO TING Prob lems P oints to check wi th possible solutions 16. USB Function cannot be setup Check that the USB cable is correctl y connected. Check that the PC and USB compliant. (Please consult the manufacturer of each device about USB support.
English 6. CLEANING 29 6. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operational lifetime. Clean the cabinet and CR T areas as follows: NO TE • Ne v.
English 30 7. SPECIFICA TIONS 7. SPECIFICA TIONS CR T 55 cm (21 inch) class, 90 ° deflection T ension Mask wit h Anti-Reflective SuperErgoCoat ® , 0.25 mm A G Pitch Horizontal Scan F requency 30 kHz – 130 kHz (Automatic) V er tical Scan F requ ency 50 Hz – 160 Hz (Automatic) Recommended Resolution 1600 dots x 12 00 lines Max .
English 7. SPECIFICA TIONS 31 Factory Defaults Contrast 100%/50% Moiré Reduction 0% Signal Filter 1 Mode 1 Signal Filter 2 100% Color Mode/T emperature Standard/9300K P owerManager On Off Timer Disab.
English 32 7. SPECIFICA TIONS Pin Assignment D-Sub mini 15 pin connector No . Signal No . Signal No . Signal 1 Red Video 6 Red ground 11 Ground (shorted with 10 pin) 2 Green Vide o / Green composite sync 7 Green ground 12 Data (SD A) 3 Blue video 8 Blue grou nd 13 H.
English 8. GLOSSAR Y 33 8. GLOSSAR Y Color T emperature Color temperature is a method to measure th e white color tone, generally indicate d in degrees Kelvin. At high temperatures the white tone appears somew hat blue, while at lower temperatures it appe ars somewhat red.
English 34 8. GLOSSAR Y Resolution Resolution is expressed as the number of dots (pixels) displayed on th e screen. A larger number of dots produces a more sharply defined (a highe r -resolution) image.
[Applicable to gray (standard color version only).] Congra tulations ! Y ou have just purchased a TCO’99 appr oved and labelled product! Y our choice has provided you with a product de veloped for professional use.
Environmental Requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consi st of flame retard ant substances.
For U.S.A, Canada, etc. (rated 100-120 V ac) Only FCC Declaration of Conformity W e, the Responsible Party EIZO NANAO TECHNO LOGIES INC. 5710 W arland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product T rade name: EIZO Model: FlexScan T966 is in conformity with Part 15 of the FCC Rule s.
Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nac h EK1-ITB 2000 mit dem V ideosignal, 1600 Punkte × 1200 Zeilen, RGB analog, 0,7 Vp-p und mindestens 85,0 Hz Bildwiederholfrequenz, non interlaced.
V ersion A (MA-21D5-EU) First Edition-July , 2002 153 Shimokashiwano, Matto, Ishikawa 924-8566 Japan Phone: + 81 76 277 6792 Fax: + 81 76 277 6793 EI Z O N A N A O C O R PO R A T I O N 5710 W arland Drive, Cypress, CA 90630 Phone: +1 562 431 5011 Fax: +1 562 431 4811 EI Z O NANAO TECHNOLOGIES INC.
An important point after buying a device Eizo FlexScan T966 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eizo FlexScan T966 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eizo FlexScan T966 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eizo FlexScan T966 you will learn all the available features of the product, as well as information on its operation. The information that you get Eizo FlexScan T966 will certainly help you make a decision on the purchase.
If you already are a holder of Eizo FlexScan T966, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eizo FlexScan T966.
However, one of the most important roles played by the user manual is to help in solving problems with Eizo FlexScan T966. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eizo FlexScan T966 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
