Instruction/ maintenance manual of the product FlexScan F931 Eizo
Go to page of 30
1 ENGLISH.
2 SAFETY SYMBOLS This manual uses the safety symbols below . They denote critical information. Please read them carefully . W ARNING Failure to abide by the information in a W ARNING may result in serious injury and can be life threatening.
CONTENTS 3 ENGLISH CONTENTS PRECA UTIONS ............................................................................. 4 1. INTRODUCTION ............................................................................ 8 1-1. F eatures ....................
4 PRECA UTIONS IMPORT ANT! • This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications.
ENGLISH PRECA UTIONS 5 OK OK • Place the unit on a strong, stable surface. A unit placed on an inadequate surface ma y f all, resulting in injur y or equipment damage. If the unit falls , disconnect the power immediately and hav e the unit check ed by a qualified ser vice engineer bef ore using it again.
6 PRECA UTIONS • Use the correct v oltage . * The unit is designed for use with a specific v oltage only . Connection to another voltage than specified in this User ’ s Man ual may cause fire , electric shock, or other damage. * Do not overload your power circuit, as this may result in fire or electric shock.
ENGLISH PRECA UTIONS 7 OK • Handle with care when carrying the unit. Disconnect the power cord and signal cables and remove the optional unit. Moving the unit with the cord or the option attached is dangerous. It may result in injury or equipment damage.
8 1. INTRODUCTION 1. INTR ODUCTION Thank you very much for choosing an EIZO Color Display Monitor . 1-1. Features • Horizontal scanning frequency of 30-130 kHz V e rtical scanning frequency of 50-16.
1. INTRODUCTION 9 ENGLISH 1-3. Contr ols & Connectors Front (1 ) ScreenManager ™ (2 ) BNC/D-SUB Selection Button (3 ) A UT O-SIZING Button (4 ) QuickSet ™ Control P ad (Hereinafter “ Control.
10 2. INST ALLA TION 2 . INST ALLA TION 2-1. Connecting the monitor to the PC • Be sure that the pow er switches of both of the PC and the monitor are OFF . 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC.
2. INST ALLA TION 11 ENGLISH 2. Plug the power cord into the power connector at the rear of the monitor . Then, plug the other end of the cord into a power outlet. 3. T urn on the monitor first, then the PC. The monitor ’ s power indicator will light up (green).
12 2. INST ALLA TION 2-2. Getting Ready f or Operation T r y each setting procedure if necessary in the following cases. 1. The display image size and/or position is incorrect Æ Æ Æ Æ Æ Press the AUTO-SIZING button on the front panel.
3. SCREEN ADJUSTMENT 13 ENGLISH 3. SCREEN ADJUSTMENT • Allow the monitor to stabiliz e for at least 30 minutes bef ore making image adjustments. 3-1. How to use the ScreenManager Use the control pad on the front panel. The control pad can be pressed in 5 directions, “ Enter ” , “ Up ” , “ Down ” , “ Left ” and “ Right ” .
14 3. SCREEN ADJUSTMENT Main menu Sub menu Adjustments and Settings See page Contrast — Screen contrast and brightness * — Size — Screen size — P osition — Screen position — Screen Side Pin Side pin balance — T rapez oidal Distor tion — Tilt Inclination — Unif or mity Uniformity p .
3. SCREEN ADJUSTMENT 15 ENGLISH 3-2. Color Adjust the color using by <Color> menu. 1. T o set the color temperature Æ Æ Æ Æ Æ Set the <T emperature>. T emperature can be set from 4,000 K to 10,000 K, in 500 K increments. (Including the 9,300 K default setting.
16 3. SCREEN ADJUSTMENT 3-4. P ower Sa v e There are two power save settings choose the setting which matches your environment. Set the power saving setting by using <Others> menu. • Do your part to conser ve energy , tur n off the monitor when you are finished using it.
3. SCREEN ADJUSTMENT 17 ENGLISH 3-5 . Adjustment Loc k Use the “ Adjustment Lock ” function to prevent any accidental changes. Locked function • Adjustments and settings in the ScreenManager . • AUTO-SIZING button. Unlocked function • Adjustment of contrast and brightness by the shortcut keys.
18 4. TROUBLESHOO TING 4. TR OUBLESHOO TING If a problem persists even after applying the suggested remedies, contact an EIZO dealer . *The bracket < > indicates the function of ScreenManager Problems P oints to chec k with possible solutions 1.
4. TROUBLESHOO TING 19 ENGLISH Problems P oints to chec k with possible solutions Use of the < Moir é Reduction > adjustment may cause a slight vibration.
20 4. TROUBLESHOO TING Problems P oints to chec k with possible solutions Adjust the < Contrast > (Contrast and Brightness). Some signal timing can be the cause of this problem. T o correct this, turn off the monitor , then hold down the “ down ” arrow key while turning on the monitor again.
5. CLEANING 21 ENGLISH 5. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operational lifetime. Clean the cabinet and CR T areas as follows: • Never use .
22 6. SPECIFICA TIONS 6. SPECIFICA TIONS CR T 55 cm (21 inch) class, 90 ° deflection Invar Shadow Mask with Anti Reflective SuperErgoCoat ® CR T Dot Pitch 0.25 mm (Horizontal: 0.21 mm) Scan Frequency Horizontal 30 kHz- 130 kHz (Automatic) V ertical 5 0 H z-160 Hz (Automatic) Recommended Resolution 1600 dots x 1200 lines Max.
6. SPECIFICA TIONS 23 ENGLISH Pin Assignment * D-Sub mini 15 pin connector * BNC Connector Connector Input signal H. Sync V . Sync Green Red Blue Separate sync H. Sync V . Sync Green Red Blue Composite sync H/V composite sync N/A Green Red Blue Sync on green N/A N/A Green composite sync Red Blue No .
24 7. GLOSSAR Y 7. GLOSSAR Y Color T emperature Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. At high temperatures the white tone appears somewhat blue, while at lower temperatures it appears somewhat red.
7. GLOSSAR Y 25 ENGLISH Resolution Resolution is expressed as the number of dots (pixels) displayed on the screen. A larger number of dots produces a more sharply defined (a higher -resolution) image.
26 8. INDEX 8. INDEX A Adjustment lock ------------------------- 1 7 A UT O-SIZING button ------------------- 12 B BNC/D-SUB selection button -------- 1 7 Brightness --------------------------------- .
Congratulations! Y ou have just purchased a TCO ’ 99 approved and labelled product! Y our choice has provided you with a product developed for professional use. Y our purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances.
FCC Declaration of Conformity W e, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 W arland Drive, Cypr ess, CA 90630 Phone: (562) 431-5011 declare that the product T rade name: EIZO Model: FlexScan F931 is in conformity with Part 15 of the FCC Rules.
Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1/59-98, EK1/60- 98 mit dem V ideosignal, 1600 Punkte x 1200 Zeilen, RGB analog, 0,7 Vp-p und mindestens 85,0 Hz Bildwiederholfrequenz, non interlaced.
An important point after buying a device Eizo FlexScan F931 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eizo FlexScan F931 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eizo FlexScan F931 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eizo FlexScan F931 you will learn all the available features of the product, as well as information on its operation. The information that you get Eizo FlexScan F931 will certainly help you make a decision on the purchase.
If you already are a holder of Eizo FlexScan F931, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eizo FlexScan F931.
However, one of the most important roles played by the user manual is to help in solving problems with Eizo FlexScan F931. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eizo FlexScan F931 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
