Instruction/ maintenance manual of the product MP7730 3M
Go to page of 40
1 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 MP7730 Multimedia Projector Operator’ s Guide MP7730 Projecteur multimédia Guide de l’opérateur MP7730 Multimedia-Projektor Benutzerhandb uch .
3M ™ Multimedia Projector MP7730 2 © 3M IPC 2000.
3 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 T able of Contents Int r oduction Sa f eguards . ................................................................................... 4 Thank Y ou f or Choosing 3M ....................................
3M ™ Multimedia Projector MP7730 4 © 3M IPC 2000 Intr oduction W ARNING Caution Caution Intended Use Before operating the machine, please read the entire manual thoroughly . The 3M Multimedia Projector MP7730 was designed, built, and tested for use indoors, using 3M lamps, 3M ceiling mount hardw are, and nominal local voltages.
5 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 Product Saf ety Labels The follo wing safety labels are used on or within the MP7730 projector to alert you to items or areas requiring your attention. Save These Instructions The information contained in this manual will help you operate and maintain your 3M ™ MP7730 Multimedia Projector .
3M ™ Multimedia Projector MP7730 6 © 3M IPC 2000 Intr oduction W arranty Limited W arranty 3M warrants this product a gainst any defects in material and workmanship, under normal usage and storage, for a period of two years from date of purchase.
7 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 ✓ Note: Save the shipping bo x and packing materials in the event the MP7730 should require shipping to a 3M Service Center for repair .
3M ™ Multimedia Projector MP7730 8 © 3M IPC 2000 1. Standby/On Button 8. Projection Lens 2. External Control Pad 9. Height Adjustment Feet 3. Remote Control Sensor 10. A C Power Cord Input 4. Carrying Handle 11. Serial Port T erminal Connection 5. Image T ilt Control 12.
9 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 Intr oduction The MP7730 Multimedia Projector integrates ultra-high bright lamp and TI ™ DLP ™ technology into a single unit.
3M ™ Multimedia Projector MP7730 10 © 3M IPC 2000 Source Standby/On Laser Menu F reeze Blank Exit L-Click Drag R-Click + Magnify - + V olume - Return Mute Ch Up Ch Down Rev erse Add/Erase Scan 1 2 3 4 5 6 7 8 0 9 + / - Remote Control Identification Disk P ad Operate for normal mouse functions, Mouse Mode, to select function, Menu Mode.
11 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 The remote control sensor is located near the back of the projector . The distance between the sensor and the remote control unit must be shorter than 4 meters (13 feet). Freeze The image will be frozen when the FREEZE b utton is pressed.
3M ™ Multimedia Projector MP7730 12 © 3M IPC 2000 Laser Press this button to generate the laser beam that functions as a red pointer on the screen. Disk P ad If the PS/2 (ADB) mouse cable is connected with the PC Notebook or Mac Po werbook mouse port, the Disk Pad can tak e over the Notebook or Po werbook mouse function.
13 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 Place the projector at the required distance from the screen according to the desired picture size (see the table belo w). Screen Chart System Setup Digital Ke ystone Correction K eystoning is when the projected image is noticeably wider on either the top or bottom.
3M ™ Multimedia Projector MP7730 14 © 3M IPC 2000 Connecting to V arious Equipment It only takes a fe w minutes to connect the 3M ™ Multimedia Projector MP7730 to your computer , VCR, or other de vice. Connection T erminals T urn of f power to all de vices before making connections.
15 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 Apple ™ Desktop Mouse The Macintosh operating system should recognize the MP7730 as a mouse without any dri vers being loaded.
3M ™ Multimedia Projector MP7730 16 © 3M IPC 2000 Standby/On Standby/On Standby/On Standby/ON Operation Startup 1. Plug po wer cord into wall socket. 2. Press the ST ANDBY/ON button and hold for 3 seconds. • The ON indicator blinks green and then stays green.
17 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 Menu P ages Press “ Menu ” ke y and the main menu will display on the screen. Press “ Menu ” again to enter page items, and press and to select sub-menus. The main menu will go off automa tically if there is no further action from user for 10 seconds.
3M ™ Multimedia Projector MP7730 18 © 3M IPC 2000 Menu Exit Menu MENU EXIT STANDBY/ON MP7630 DLP A TEXAS INSTRUMENTS PRODUCT MENU EXIT Keystone 0 Brightness 50 Contrast 50 Color Balance 1 Menu Exit.
19 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 Color Balance (0-2) Ke ystone (0-255) 128 160 96 128 Brightness (0-255) 128 65 193 Contrast (0-255) 128 65 193 0 2 1 Displa y Menu Operation.
3M ™ Multimedia Projector MP7730 20 © 3M IPC 2000 Image Menu 1 x1 2 x1 3 x1 Horizontal Phase T o Menu Items A uto Resize Off On Horizontal Size 65 193 Horizontal P osition 65 193 V ertical P osition 65 193 W ill automatically adjust image to fit onto screen.
21 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 Operation Menu A uto Off Mirror Normal H-In v (Horizontally In verted) Language English (En) French (Fr) Deutsch (De) Italian (It) Espa ñ ol (Es) Swedish (Sv) Dutch (Ne) 00:00:00 00:60:00 W ill turn of f the power in 60 minutes.
3M ™ Multimedia Projector MP7730 22 © 3M IPC 2000 Shutdown 1. Press the ST ANDBY/ON button. The Shutdo wn screen will display . Select the YES option (press arrow b utton or disk pad button) to turn off . 2. The f an will continue to run for approximately 90 seconds.
23 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 Optional Video Module Features Optional Video Module Connections Laser Disc S-VHS RED WHT OUT OUT IN IN IN IN VCR RED WHT YEL OUT OUT OUT Audio L A.
3M ™ Multimedia Projector MP7730 24 © 3M IPC 2000 Lock MP7630 D LP A T E X A S I N S T R U M E N T S P R O D UC T Attaching the Optional Video Module to the MP7730 S TA N D B Y /O N M P 7 6 3 0 M E N U E X I T 1. Precisely align the two metal tabs on the bottom of the module and insert into the corresponding slots on the back of the projector .
25 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 Image Sub-Menu This menu is only a vailable when the input signal is from V ideo, S-V ideo, TV or CA TV .
3M ™ Multimedia Projector MP7730 26 © 3M IPC 2000 Operation 1. Go into the menu system and mov e to the Source sub-menu. Use the Menu key on the control pad or remote control unit to scroll through items in the sub-menu. Select the T uner items and press or ke ys to prompt out of the tuner menu.
27 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 3. After leaving the menu system, press the Scan b utton to scan all existing c hannels in that region. ✓ Note: Scan function must be done for the first use in certain regions to catc h all the channels in the local CA TV system.
3M ™ Multimedia Projector MP7730 28 © 3M IPC 2000 Source Men u Optional Video Module V olume Source 15 T reble 8 Bass 8 Mute T uner Press "<-" or "->" to select PC Video O.
29 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 Use and Replacement of Lamp Lamp The projector lamp has a normal operating time of approximately 1200 to 1500 hours, called the lamp life. During the normal lamp life, the picture will be bright and the colors clear .
3M ™ Multimedia Projector MP7730 30 © 3M IPC 2000 Lamp Replacement ✓ Note: F or maximum lamp life, do not shock, handle or scratch the lamp glass when it is hot.
31 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 Resetting the Lamp Hours Please do the follo wing within 10 minutes from turning power on if you replace the lamp after 1500 hours. 1. Press the Exit b utton on projector or remote control for three seconds to display the total used lamp time.
3M ™ Multimedia Projector MP7730 32 © 3M IPC 2000 T roubleshooting S M E L B O R P S N O I T U L O S R E W O P O N ✓ . t e l n i C A e h t o t n i d r o c r e w o p e h t g u l P ✓ . t e l n i r e w o p e h t o t n i d r o c r e w o p e h t g u l P ✓ .
33 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 T roubleshooting Status Indicator Lights and Messages d e y a l p s i D e g a s s e M ) e l b a c i l p p a f i , n o i t u l o S d n a ( g n i n a e M G N I H C R A E S .
3M ™ Multimedia Projector MP7730 34 © 3M IPC 2000 Service Information Accessories Description P ar t Number Power Cord (EU) ........................................................................................ D Y -0205-1354-4 Power Cord (US) ..
35 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 Appendix T echnical Specifications ✓ Note: All specifications are subject to change without notice. General Product name Multimedia Projector Model name MP7730 Optical Displa y system 1-CHIP DMD Lens F/Number: F/2.
3M ™ Multimedia Projector MP7730 36 © 3M IPC 2000 Dimensions 202 mm ( 8 in ) 67 mm ( 2.6 in ) 246 mm ( 9.7 in ) MENU EXIT STANDBY/ON MP7630 DLP A TEXAS INSTRUMENTS PRODUCT Lock Appendix 67 mm ( 2.
37 3M ™ Multimedia Projector MP7730 © 3M IPC 2000 Appendix n o i t u l o s e R ) z H k ( c n y S H ) z H k ( c n y S V k r a m e R 0 5 3 x 0 4 65 . 1 31 . 0 7 0 0 4 x 0 4 6 9 . 7 3 1 . 5 8 A S E V 0 0 4 x 0 2 75 . 1 30 . 0 7 0 0 4 x 0 2 7 9 . 7 3 1 .
3M ™ Multimedia Projector MP7730 38 © 3M IPC 2000 Appendix Nationality Codes API TV System Code Definition NTSC T uner Box a e r A l e n n a h C C S T NA S U) D T S ( 1) C R H ( 2) C R I ( 2 C S T .
39 3M ™ Multimedia Projector MP7730 © 3M IPC 2000.
3M ™ Multimedia Projector MP7730 40 © 3M IPC 2000 Important Notice All statements, technical information, and recommendations related to 3M ’ s products are based on information belie ved to be reliable, but the accuracy or completeness is not guaranteed.
An important point after buying a device 3M MP7730 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3M MP7730 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3M MP7730 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3M MP7730 you will learn all the available features of the product, as well as information on its operation. The information that you get 3M MP7730 will certainly help you make a decision on the purchase.
If you already are a holder of 3M MP7730, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3M MP7730.
However, one of the most important roles played by the user manual is to help in solving problems with 3M MP7730. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3M MP7730 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
