Instruction/ maintenance manual of the product HP-6002AC Edimax
Go to page of 30
HP -6002AC User Manual 03- 201 4 / v1.0.
1 COPYRIGHT Copyright Edim ax Technology Co., Ltd. al l rights reserved. No part of this publication may be reprodu ced, transmitted, transc ribed, stored in a retrieval system, or translated in t.
2 Contents Chapter 1: Introduction ..................................................................................................................................... 3 1.1 Product Features ...........................................................
3 Chapter 1 : In troduction 1.1 Product Featur es • High-speed d ata transfer rate of up to 600Mbp s, ideal for bandwidth-intensive HD video or 3D video str eaming and online gaming • Features ene.
4 1.3 Compatibility AV6 00 powerline devic es (HomePlug AV standard ) are incompatib le and cannot be used with 14 Mbps and 85Mb ps powerline devices ( HomePlug 1.0 an d 1.1 standards ). 1.4 System Requir ements Operating System Utility supports Wind ows XP/Vista /7/8 CPU Intel P entium III 1.
5 Chapter 2 : In terfaces 2.1 LEDs LED Status Description LAN1-3 Green LAN port connecte d Blinking LAN activity (transf erring data) Off LAN port not conn ected PLC Green The green indicator turns on and the green indicator turns bli nks slowly when the devic e is detecting a powe rline link.
6 the adapter, just a s a normal wall socket woul d. Ethernet Port Group This is a Gigabi t Ether net port for connecti ng to a computer or othe r devices with a networ k port. Creates an encrypt ed powerline network group automatically (press the but ton for less than 3 seconds ).
7 Chapter 3:Utility Software Installa tion 3.1 Win 8 Step 1 Before installing th e utility software, make sure that no other powerline u tility is installed on your compute r. If any other utility software is inst alled, un install it and reboot the c omputer.
8 Step 4 Click right button on WinPCap 4.1.2 then click “ P roperties ” . Step 5 Click Comp atibility tab and check “ Run this program in compatibility mode for:", then selec t Windows 7, then c lick “ Apply ” . Step 6 Then click “ WinPc ap_4_1_2 ” .
9 Step 7 When the following WinPcap Compatibility Assistan t appears, select Run the program without ge tting help..
10 Step 8 After the installation is comp lete, click “ Fini sh ” ..
11 Step 9 Click th e “ Edimax PowerLine Utilit y ” , the “ PLC AV600 Utility ” appears, click “ Next ” to continue..
12 Step 10 Select where you want to install the utility software, and then click “ Next ” . Step 11 After the installati on is complete, click “ Close ” .
13 Step 12 An icon will ap pear on your d esktop. Click the icon to open the utility software. Note: You can manage all t he connecte d powerline adapte rs with th e utility software.
14 3.2 Win XP/Vista / 7 Step 1 Before installing th e utility software, make sure that no other powerline u tility is installed on your compute r. If any other utility software is inst alled, un install it and reboot the c omputer. Step 2 Insert the CD into your CD -ROM drive.
15 Step 4 If you have not installed Win Pcap version 4.1.2 ( or higher) on your compute r before. The wiza rd will guide you through the setup p rocess.
16.
17 Step 5 When th e “ Edimax PowerLine Utility ” setup wizard appears, click “ Next ” to continue. Step 6 In the “ Lic ense Agreement ” scree n, please select “ I Agree ” and then click “ Next ” to continue.
18 Step 7 Select where you want to install the utility software, and then click “ Next ” . Step 8 If you confirm to install the utility, click “ Next ” .
19 Step 9 After the installation is comp lete, click “ Close ” . Step 10 An icon will app ear on your deskt op. Click the icon to open the utility soft ware. Note: You can manage all th e connected powerline adapters with the utility software. However, i nstalling th e utility software i s optional.
20 Chapter 4 : Using the Utility Softw are 4.1 Main Tab The “ Main ” tab provides a list of p owerline adap ters connected to the net work. The upper p anel displays local powerline adapters . Th e lower pan el displays remote powerline adapters in the network.
21 4. 2 Diagnostics Tab The “ Diagnostics ” tab displays the system information and history of all rem ote devices. The upper p anel displays techn ical data concern ing the software and hardware on th e host compu ter an d t he lower panel displays the history of all rem ote devices.
22 4. 3 About Tab The “ About ” tab contains some b asic information ab out the software. You can also enable or d isable the autoscan fun ction under “ Preferenc es ” .
23 Chapter 5 : Grou p Butt on This section dem onstrates how to add or remove d evices from a HomeP lug AV n etwork with the “ Group ” button. 5.1 Forming a Hom ePlug AV Logical N etwork When two .
24 5.2 Joining a Netw ork If you want to add a new powerline device to an existing network , follow th e following procedures: Step 1 Press the “ Group ” b utton on an adapter in th e existing net work (adapter A or B) for less than 3 seconds. The Power LED will st art to blink.
25 5.3 Leaving a Netw ork & Joining an other Network If you want to remove a p owerline device from an existing network and ad d it to another net work, follow the following procedu res: Step 1 Press the “ Group ” b utton on the adapte r to be removed (adapter B) for at least 10 seconds.
26 Chapter 6: Trou bleshooting If your powerline ada pters have difficu lty communicatin g with each other, try the following proc edures: Try power cyc ling the u nit by unplugging it from the electric outlet for 10 seconds an d plugging it in again.
27 Federal Communic ation Commissi on Interfere nce Statement This equipment has b een tested and f ound to comply with the limits f or a Class B digital devi ce, pursuant to Part 15 of FCC Rules. These li mits are designed to provide re asonable pr otection against harmfu l interference in a residential installation.
28 EU Declaration of Confor mity English: This equipment is in comp liance with the essential r equirements and other relevant pr ovisions of Directive 2004/108/EC, 2 009/125/EC.
29.
An important point after buying a device Edimax HP-6002AC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Edimax HP-6002AC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Edimax HP-6002AC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Edimax HP-6002AC you will learn all the available features of the product, as well as information on its operation. The information that you get Edimax HP-6002AC will certainly help you make a decision on the purchase.
If you already are a holder of Edimax HP-6002AC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Edimax HP-6002AC.
However, one of the most important roles played by the user manual is to help in solving problems with Edimax HP-6002AC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Edimax HP-6002AC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
