
Pocket Projector
Operator’s Guide




The 3M Pocket Projector MP160 is designed to operate with the 3M specified battery and 3M power adapter in normal office or home environments.
The ambient operating environment should be free of airborne smoke, grease, oil and other contaminants that can affect the operation or performance of the projector.
Use of this product in adverse conditions will void the product warranty.
Please read, understand, and follow all safety information contained in these instructions prior to the use of this projector. Retain these instructions for future reference.
m Warning: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury and/or property damage.
m Caution: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury and/or property damage.

To reduce the risk associated with hazardous voltage: • Do not modify this product in any way. Use only 3M approved replacement components.
To reduce the risk associated with fire and explosion: • Do not immerse the projector or battery in any liquid or allow either to get wet.
To reduce the risks associated with driver distraction: • Do not use this projector in a moving motor vehicle.
To reduce the risks associated with choking: • Keep AV adapters and other small parts away from young children.
m Warning

To reduce the risk associated with fire and explosion, battery leakage or overheating: • Do not immerse the battery in water or allow it to get wet.
To reduce the risks associated with hearing loss: • Be sure to read earphone manufacturer's instructions with respect to volume level.
To reduce the risk associated with environmental contamination: • Dispose of all system components in accordance with applicable government regulations.
To reduce the risks associated with LED bright light: • Do not stare directly into the projector lens.
To reduce the risks associated with tripping and falling: • Position the charging cord and data cables so that they are not a tripping hazard.
m Warning · m Caution


LITHIUM ION BATTERY Model No. LIN370-001 28.86Wh (11.1V 2600mAh x 3) P/N 78-6972-0026-5

Max Charge 12.3V/1.3A
IEC60825-1 :1993+A1
Maximum Radiant Power:
:1997+A2:2001
1.693 mW
LED Light Output


5 Outlet Adapters (4)
7 AV Adapters (3)
8 Product Warranty and Safety Guide
9 Quick Start Guide


3 Volume Down Button
4 Volume Up Button
5 Battery Status Button

16 DC Power Input

The 3M Pocket Projector MP160 comes with a rechargeable battery. The battery should be fully charged before using the projector with the battery.
To install the battery: point the contacts on the battery toward the contacts on the projector, insert the end farthest from the battery latch first, then push down until the battery clicks into place.


To remove the battery: slide the battery latch away from the battery and then lift the battery out, starting at the end closest to the latch.



The power adapter is used to charge the battery or power the projector. There are four outlet adapters to give you the flexibility to power the 3M MP160 projector in most countries.
1 Select the outlet adapter that will plug into your wall outlet.
2 Align the outlet adapter to the power adapter and slide the outlet adapter into place.

1 Push the button on the outlet adapter.
2 Slide the outlet adapter up.
3 Remove the outlet adapter.
4 Replace with the new outlet adapter.


The rechargeable battery gives you up to two hours of battery life. When the battery needs to be charged, the status indicator will flash red. The battery should be fully charged before using the projector.
Charge the battery by connecting the power adapter to the projector.
1 Turn the projector power off.
2 Connect the power adapter to the projector’s DC input.
3 Connect the other end of the power adapter into the electrical outlet.
4 The status indicator will change to amber while the battery is charging.
5 Allow three hours to fully charge the battery. When charging is complete, the status indicator will turn off.


Battery Charging Notes: • If the projector power is off, allow three hours for the battery to fully recharge. If the projector power is on, the battery will take longer to charge.
Battery Maintenance Tips: • Remove the battery when the projector will not be used for one week or longer.

The 3M Pocket Projector MP160 will display informational icons depending on the input device and signal being detected. The 3M MP160 was designed to operate with the 3M VGA and AV cables only.
Use the AV cable to input video from camcorders, digital cameras, DVD players and digital media players into the VGA-AV input on the projector.
1 Connect the AV cable to the projector’s VGA-AV input.
2 Connect the other end of the AV cable to the video device’s audio and video outputs.

Tip: Some video devices do not have the standard audio and video connections and may require an AV cable specified by the manufacturer. The AV cable allows you to connect your video device to your TV monitor or your projector and may be purchased from the video device manufacturer. Once you have the AV cable, use the cable adapters to connect the video device cable and the projector cable.

For component video input, you must purchase the optional 3M MP160 Component AV Cable [3M part number 78-6972-0032-3]. This cable sends a higher quality video signal for the best possible image.
1 Connect the component AV cable to the projector’s VGA-AV input.
2 Connect the other end of the AV cable to the video device’s audio and video outputs.

Important Note: There are two red connectors on the Component AV cable. One is for the right audio channel and the other is for the Pr component video signal. Be careful to connect the red audio to red audio and red video to red video. If these connectors are switched, the projected image will appear green and an abnormal noise will come from the right speaker.
Tip: Some video devices do not have the standard audio and video connections and may require an AV cable specified by the manufacturer. The AV cable allows you to connect your video device to your TV monitor or your projector and may be purchased from the video device manufacturer. Once you have the AV cable, use the cable adapters to connect the video device cable and the projector cable.
Some video devices, by default, will not output a video signal. The video device’s manual should provide instructions on how to change the video output setting.


Use the VGA-audio cable to connect the projector to desktop computers, laptop computers, ultra-portable computers and some personal digital assistants (PDAs). The projector supports VGA, SVGA, XGA, and WXGA resolutions. For best results, set the computer’s resolution to SVGA (800x600).
1 Connect the VGA cable to the 3M Pocket Projector MP160.
2 Connect the VGA cable to the computer’s video and audio outputs.
3 Set the computer resolution to one of the supported resolutions.


1152 x 870 75Hz

Press and hold the power button for three seconds. Release the power button when the projector begins to project an image and the status indicator turns green.

Press and hold the power button for three seconds. Release the power button when the projected image is gone. The projector is off when the status indicator is off or solid amber. When the status indicator is solid amber, the battery is charging.

The status indicator light provides information about the projector’s state.
Status Indicator Light Meaning
Flashes green three times A new power source is connected to the projector and the projector is ready to be powered on.
Projector is off. If the power adapter is connected to the projector, and the battery is installed, the battery has finished charging. Flashes green The projector is starting up. Solid green The projector is on. Solid amber The projector is off and charging the battery. Flashes amber The projector has overheated and needs to cool. Flashes red twice and pauses then repeats The projector cannot charge the battery.
Flashes Red The projector cannot turn on because the battery needs to be charged.
The projector will display a video icon when it is connected to a video cable or a video source.
The projector detects the audio/video cable.
The projector detects an NTSC video input signal.
The projector detects a PAL video input signal.
The projector detects the component audio/video cable.
The projector detects the video input signal and displays the video source’s resolution and refresh rate below the component icon.
The projector detects the VGA-audio cable.
The projector detects computer input signal and displays the input resolution and refresh rate
The projector does not support the video signal.
The projector is measuring and synchronizing to video input signal.

The 3M MP160 Projector can project a diagonal image of 10 to 80 inches (254– 2032 mm). Refer to the chart for associated dimensions.
8 in (20.32 cm) 6 3/8 in (16.3 cm) 4 3/4 in (12.2 cm) 9 2/4 in (24.4 cm)
14 in (35.56 cm) 11 1/4 in (28.4 cm) 8 3/8 in (21.3 cm) 16 3/4 in (42.7 cm)
20 in (50.8 cm) 16 in (40.6 cm) 12 in (30.5 cm) 24 in (61 cm)
26 in (66.04 cm) 20 3/4 in (52.8 cm) 15 5/8 in (39.6 cm) 31 2/8 in (79.2 cm)
32 in (81.28 cm) 25 5/8 in (65 cm) 19 1/4 in (48.8 cm) 38 3/8 in (97.5 cm)
38 in (96.52 cm) 30 3/8 in (77.2 cm) 22 3/4 in (57.9 cm) 45 5/8 in (115.8 cm)
44 in (111.76 cm) 35 1/4 in (89.4 cm) 26 3/8 in (67.1 cm) 53 in (134.1 cm)
50 in (127 cm) 40 in (101.6 cm) 30 in (76.2 cm) 60 in (152.4 cm)
60 in (152.4 cm) 48 in (121.9 cm) 36 in (91.4 cm) 72 in (182.9 cm)
70 in (177.8 cm) 56 in (142.2 cm) 42 in (106.7 cm) 84 in (213.4 cm)
80 in (203.2 cm) 64 in (162.6 cm) 48 in (121.9 cm) 96 in (243.8 cm)
Turn the focus wheel to sharpen the image.

Press the Volume Up or Volume Down button to adjust the sound. A volume bar will appear on the screen to help you set the volume level.
Press the MUTE button to mute the volume. An icon will appear on the screen to indicate the current setting. To restore the volume, press the MUTE button again. If you press the Volume Up or Volume Down button while the volume is muted, the volume will also be restored, but from an initial volume level of zero.
To check the battery, press the Battery Status button. A battery bar will appear on the screen indicating the amount of charge currently in the battery.

The projector includes a table-top tripod that mounts to the bottom of the projector.

1 Turn off the projector and disconnect power and other cables.
2 Use a soft cloth, such as the 3M™ High Performance Cleaning Cloth, to wipe off dust. If the dust is difficult to remove, dampen the cloth with clean water and then wipe the projector clean. Then use a clean cloth to dry the projector.

The projector will not turn on. • The battery is not properly installed, or the power adapter is not connected to the projector and a working wall outlet. Test the electrical outlet by plugging another electrical device (like a radio) into the wall outlet to confirm that the wall outlet works.
The status indicator is flashing red when the power button is held down. • The battery needs to be charged or reinstalled. See “Charge the Battery” on page 12.
The image is not visible or is very dim. • The 3M MP160 Projector is a battery-operated device and requires controlled lighting conditions. The image may appear very dim in brightly lit rooms.
The projector is displaying a question mark. • The projector does not support the video or computer input signal. Switch to a signal that the projector supports. See “Supported Computer Signals” on page 25.
A computer is connected to the projector but the projector will not display the computer’s image. • Plug the VGA-audio cable into the projector and the icon in the upper-left corner of the image will display the “VGA-Audio cable” icon. See “On Screen Icons” on page 18.
The projector is making a noise. • The projector has a small fan for cooling the LED light source. The fan turns on and off automatically based on the projector’s internal temperature. The fan will turn on more often in warm environments or at high altitudes.

My video device is connected to the projector but the projector will not display the video. • Unplug the AV cable from the projector and the splash screen will display.

Size 9.4 mm (0.37")
Resolution SVGA 800 x 600 Pixels
Aspect Ratio 4:3
Projection Distance 8.4 in. – 50.4 in. (213–1280 mm)
Image Size 10 in. – 60 in. Diagonal (254–1524 mm)
1:0.84
Lens Offset 1:1 (none)
Inputs DC-in, AV-in (inc. VGA and component)
Compatible Resolutions VGA, SVGA, XGA, WXGA, 1280 x 960 @ 60Hz, 1440 x 900 @ 60Hz, MAC 640 x 480 @ 67Hz, 832 x 624 @ 75Hz, 1152 x 870 @ 75Hz
Vertical Scan Rate 50 Hz / 60 Hz, MAC - 67 Hz / 75 Hz
Horizontal Scan Rate 31.5 kHz – 49.68kHz
Video Compatibility NTSC, PAL
Video Resolutions 480i, 480p, 576i, 576p, PAL, NTSC, H.264, SD (480i/576i), HD (720p/1080i)
Dimensions 5.91 x 2.56 x 1.20 in. (150 x 65 x 30.5 mm)
Weight ≤ 11.46 oz (≤ 325 g)
Tripod Socket ¼" - 20
Operating Conditions Temperature Range
Humidity Range 10–80% RH without condensation
Altitude Range Sea Level to 1,829 m (6000')
Projector · Description Specification · Imager Technology LCOS

LIN370-001 Rechargeable Lithium-Ion Battery
Type (LIN370-001) Rechargeable Lithium-Ion Battery
Rated Capacity 11.1 V 2600 mAh, 28.9 Wh
Dimensions 81.5 x 64 x 23 mm
Description Resolution (width x height) Refresh Rate
VGA 640 x 480 60 Hz
SVGA 800 x 600 60 Hz
XGA 1024 x 768 60 Hz
WXGA 1280 x 768 60 Hz
1280 x 960 60Hz
1440 x 900 60Hz
MAC 640 x 480 67Hz
832 x 624 75Hz
1152 x 870 75Hz
Replacement Parts / Accessories
Description 3M Part Number
Power Adapter with US, EU, UK, AUS plugs 78-6972-0033-1
AV Video Cable 78-6972-0031-5
Component AV cable 78-6972-0032-3 Optional
3M Adapter Cable for Apple® 78-6972-0034-9 Optional

This warranty applies to the continental US only. The warranty terms, conditions, remedy and limitation may vary in other countries. Contact your local 3M Company for warranty information.
THE WARRANTIES STATED ABOVE ARE EXCLUSIVE AND ARE MADE IN PLACE OF ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY INDUSTRY PRACTICE OR CUSTOM OR TRADE USAGE.
In the event the 3M product fails to conform to the above stated warranties within the applicable warranty period, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or to refund the purchase price of the 3M product. All replaced parts or products become property of 3M. If the product is repaired, 3M will repair the defective part(s) with a new or used part(s). If the 3M product is replaced, 3M will replace the 3M product with the same or equivalent model and with a new or refurbished 3M product. In the case of an approved warranty claim, the replacement 3M product will carry only the remaining term of the original 3M product’s warranty period as stated above. For warranty service, you must provide proof of the date of the original purchase else the manufacturing code date will be used to establish the start date of the warranty. The following are exclusions to the above listed warranty:
a. This warranty does not cover 3M product that is modified or damaged through improper storage, misuse, abuse, accident, vandalism, improper installation, neglect, improper shipping, damage caused by acts of war, disasters such as fire, flood, and lightning, improper electrical current, software problems, interaction with non-3M products, or service other than by an 3M Authorized Service Provider, neglect or mishandling by any person. Normal wear and tear is not covered under warranty.
b. 3M product is designed to operate in the typical indoor environment. This warranty does not cover 3M product used outside of the following circumstances:

c. The air intake and exhaust vent must be clear of obstructions. Inadequate air ventilation will cause the 3M product to malfunction or will cause damage to the 3M product which will void the warranty.
d. This warranty does not cover any additional costs including, but not limited to, those associated with removal, cleaning or installation of the 3M product, adjustments, (mechanical or electronic) made to the 3M product.
e. This warranty covers only normal use of the product. 24-hour-per-day or other excessive continual use causes strain and is not considered normal use.
f. This warranty does not cover consumables (e.g., batteries).
g. This warranty is not transferable.
h. 3M is not responsible for warranty service should the 3M label or logo or the rating label or serial number be removed unless otherwise stated in writing for the purposes of private labeling for partnership requirements.
i. This warranty does not cover postage, insurance, or shipping costs incurred in presenting your 3M product for warranty service. Said costs are the customer’s responsibility. If a claimed defect cannot be identified or reproduced in service, the customer may be held responsible for cost incurred. Should your warranty upgrade include a “change out” service and the claimed defect cannot be identified or reproduced by the technician, the customer will be responsible for call out costs.
FAILURE TO FOLLOW THE INSTRUCTIONS CONTAINED IN THE APPROPRIATE 3M PRODUCT MANUAL OR TO USE THE 3M PRODUCT IN ACCORDANCE WITH 3M’S INTENDED USE STATEMENT, WILL VOID ALL WARRANTIES AND LIMITED REMEDIES.
EXCEPT AS SPECIFICALLY STATED IN THE APPLICABLE 3M PRODUCT MANUAL, 3M SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, REVENUE OR BUSINESS) RESULTING FROM, OR IN ANY WAY RELATED TO PERFORMANCE, USE OR INABILITY TO USE ANY OF THE 3M PRODUCT. This limitation applies regardless of the legal theory upon which damages are sought.
For warranty support, please call or write your local 3M office or a 3M Authorized Service Provider to obtain an RMA # (Return Material Authorization number) before returning the product. If you are inside the Continental United States of America, please contact 3M Customer Service at 1-866-631-1656 or email meetings@ mmm.com.
What 3M Will Do To Correct Problems: • If your 3M product requires service, 3M will ask you to bring or send the 3M product, securely packaged in its original container or equivalent, along with proof of the date of original purchase, to your 3M Service Dealer or 3M Service Center.

This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause interference to radio communications. It has been tested and found to comply with the limits for a Class “B” computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference when operated in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
INSTRUCTIONS TO USERS: This equipment complies with the requirements of FCC equipment provided that the following conditions are met. If the cables include a EMI ferrite core, attach the ferrite core end of the cable to the projector. Use the cables which are included with the projector or specified.
CE Statement ElectroMagnectic Compatibility Statement: Meets 2004/108/EC Directive
Low Voltage Directive: Meets 2006-95-EC Directive.

The following information is only for EU-members States:
The mark shown to the right is in compliance with Waste Electrical and Electronic Equipment Directive 2002/96/ EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
3M Mobile Interactive Solutions can provide RoHS certification for products meeting the RoHS directive.1
European (EU) Restriction of Hazardous Substances (RoHS) Directive, 2002/95/EC,
1 RoHS compliant means that the product or part does not contain any of the substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS, as amended:(a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. This information represents 3M’s knowledge and belief, which may be based on information provided by third party suppliers to 3M.
This product includes a component covered by U.S. Patent Nos. 7,071,908 and 7,667,678, Hong Kong Patent No. HK1088976, Australia Patent No. 2004241602, United Kingdom Patent No. 2417360 and other U.S. and international patents pending, owned by Syndiant Inc.

3M is a trademark of 3M Company.
Mobile Interactive Solutions 3M Austin Center
6801 River Place Blvd. Austin, TX 78726-9000 866-631-1656 www.3MPocketProjector.com meetings@mmm.com
Please Recycle. Printed in China. © 3M 2010. All Rights Reserved. 78-6971-1546-3 Rev A
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.