Instruction/ maintenance manual of the product 9170+ Eaton Electrical
Go to page of 8
Powerware 9170 + Rail Kit 9- and 12-Slot Cabinets Installation Guide ®.
Powerware is a registered trademark o f Eaton Power Quality Corporation. Torx is a registered trademark of Textron, Inc. E Copyright 2002 - 2006 Eaton Corporation, Raleigh, NC, USA. All rights reser ved. No part of this document may be reproduced in any way without the express written approval of Eaton Corporation.
EATON Powerware ® 9170 + Rail Kit (9- and 12-Slot Cabinets) Installation Guide S 164201420 Rev B www.powerware.com 1 Rack-Mount Installation To install a 9- or 12-slot uninterruptible power system (UPS) cabinet into a rack, you must order a cabinet specifically designed for rack-mounting.
RACK-MOUNT INSTALLATION EATON Powerware ® 9170 + Rail Kit (9- and 12-Slot Cabinets) Installation Guide S 164201420 Rev B www.powerware.com 2 4. Install six metal clip nuts (nine clip nuts for 12 -slot cabinets) onto each side flange along the front of the cabinet (see Figure 1).
RACK-MOUNT INSTALLATION EATON Powerware ® 9170 + Rail Kit (9- and 12-Slot Cabinets) Installation Guide S 164201420 Rev B www.powerware.com 3 5. Install two rack - mount ears (three for 12 - slot cabinets) on each side of the cabinet (see Figure 2).
RACK-MOUNT INSTALLATION EATON Powerware ® 9170 + Rail Kit (9- and 12-Slot Cabinets) Installation Guide S 164201420 Rev B www.powerware.com 4 6. Select the proper holes in the rail that position the cabinet at the desired location in the rack.
RACK-MOUNT INSTALLATION EATON Powerware ® 9170 + Rail Kit (9- and 12-Slot Cabinets) Installation Guide S 164201420 Rev B www.powerware.com 5 9. Secure the cabinet in the rack using 10 - 32 × 1/2 ” Torx ® screws or other appropriate customer - specified screws.
*164201420B* 164201420 B.
An important point after buying a device Eaton Electrical 9170+ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eaton Electrical 9170+ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eaton Electrical 9170+ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eaton Electrical 9170+ you will learn all the available features of the product, as well as information on its operation. The information that you get Eaton Electrical 9170+ will certainly help you make a decision on the purchase.
If you already are a holder of Eaton Electrical 9170+, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eaton Electrical 9170+.
However, one of the most important roles played by the user manual is to help in solving problems with Eaton Electrical 9170+. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eaton Electrical 9170+ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
