Instruction/ maintenance manual of the product 240I S Eagle Electronics
Go to page of 8
1 Pub. 988-0152-081 Addendum I Additional Instructions for Eagle Cuda 240i S/GPS Your sonar/GPS unit, the Cuda 240i, functions exactly like the Cuda 240 described in the manual provided (part 988-0152-012). In addition, the Cuda 240i contains a communicat ions port for NMEA 0183 output.
2 A few other radio brands (and other electronic devices) th at meet the NMEA 0183 standard won't need these adapters and you will have to remove the resistor and diode to make those work.
3 Twist the exposed wires together as shown in the following figures. If you're using a Uniden or similar radio, connect the radio's NMEA Wire to the Cuda 240i data cable's yellow wire, and the radio's Ground/Shield wire to the Cuda 240i data cable's black shield wire.
4 After taping the wire ends individually, wrap the entire connection with electrical tape as shown. This will help protect from moisture and prevent the wires from breaking contact.
5 After you've removed the adapter segment, use wire pliers to expose the ends of the five remaining wires in the cable. Cut off the black, blue and white wires, then seal their ends with electrical tape. After removing the adapter segment, prepare to connect by removing and taping off unneeded wires.
6 Communications Port Configuration Now that you have the devices connected, use the Com Port command in the System Setup Menu to make them communicate. This command opens a menu that allows you to configure the communications port. Menus for changing Com Port settings.
7 To activate NMEA Output: From the Communication Ports menu, press ↓ to highlight NMEA Output. Press ENT to check (turn on) or uncheck (turn off) the NMEA Output checkbox.
8 • GGA transmits time, position and fix related data. • APB transmits autopilot information. • RMC and RMB transmits navigation information messages. • GSA and GSV transmits fix mode, DOP values and satellites in view information. • DBT transmits the depth below the transducer.
An important point after buying a device Eagle Electronics 240I S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eagle Electronics 240I S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eagle Electronics 240I S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eagle Electronics 240I S you will learn all the available features of the product, as well as information on its operation. The information that you get Eagle Electronics 240I S will certainly help you make a decision on the purchase.
If you already are a holder of Eagle Electronics 240I S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eagle Electronics 240I S.
However, one of the most important roles played by the user manual is to help in solving problems with Eagle Electronics 240I S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eagle Electronics 240I S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
