Instruction/ maintenance manual of the product XP-SR311 Aiwa
Go to page of 8
OWNER’S RECORD For your convenience, record the model number and the serial number (you will find it on the bottom of your set) in the space provided below . Please refer to them when you contact your Aiwa dealer in case of difficulty . Model No. XP-SR31 1 Serial No.
Note Close the battery compartment firmly , or the compact disc may be damaged. Note on dry cell batteries • Make sure that the 0 and 9 marks are correctly aligned.
USING ON RECHARGEABLE BA TTERIES → C • Be sure to use size AA Ni-Cd 1.2 V 700 mAh rechargeable batteries, which are commercially available. • Be sure to read the instructions of the purchased rechargeable batteries before use. • When using on rechargeable batteries for the first time, charge them until the battery indicator goes out.
XP-SR311(AU)E Page 1 DSL Press DSL for more powerful sound and deeper bass. : Deep bass is emphasized. : Deep bass is strongly emphasized. : Normal sound Connecting the headphones → F Pull out the rubber cap and connect the supplied headphones to the PHONES/LINE OUT jack.
B PLA YBACK → I Pull out the rubber cap and connect the supplied headphones to the PHONES/LINE OUT jack. 1 Release HOLD. 2 Place a disc. 3 Press e PLA Y/P AUSE.
Note When the unit is set to E•A•S•S-12 or -48 second mode, if PLA Y MODE is pressed at the end of the track to select the other play mode, the unit may not change to the other mode properly . RADIO RECEPTION T uning in to a station → M 1 Press TUNER ON/BAND repeatedly to select AM or FM.
AM steps → O Radio broadcasts have different frequency ranges and changes in dif ferent steps in different countries. This unit is factory-set to 10 kHz steps on AM. When using the unit where the AM step changes to 9 kHz, set the AM STEP switch on the inner side of the disc compartment to 9 kHz.
XP-SR311(AU)E Page 2 yg SPECIFICA TIONS T racking system 3-beam laser Laser pickup Semiconductor laser D/A conversion 4-times oversampling digital filter + 1-bit DAC Frequency response 20 – 20,000 Hz (47 k ohms) Output PHONES/LINE OUT jack (stereo mini-jack) Frequency range AM: 530/531 kHz – 1,710/1,602 kHz (10 kHz/9 kHz steps) FM: 87.
An important point after buying a device Aiwa XP-SR311 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiwa XP-SR311 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiwa XP-SR311 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiwa XP-SR311 you will learn all the available features of the product, as well as information on its operation. The information that you get Aiwa XP-SR311 will certainly help you make a decision on the purchase.
If you already are a holder of Aiwa XP-SR311, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiwa XP-SR311.
However, one of the most important roles played by the user manual is to help in solving problems with Aiwa XP-SR311. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiwa XP-SR311 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
